Make Noise
Lineup 20 / 50 in corpus
Lineup transcribed from https://www.makenoisemusic.com/modules ↗, last checked 2026-05-13.
-
Bruxa
Multi-tap delay line with over a dozen unique feedback paths and multiple filters within those feedback paths, aligned to allow for accumulation of noise, saturation and signal degradation. A collaboration between Make Noise and Alessandro Cortini, sharing origins with Strega's Time/Filter Experiment.
-
DXG
Dual Stereo Low Pass Gate and Mixer with two stereo LPG channels and a three-channel stereo summing mixer. Vactrol-free 100% analog design emulating classic vactrol LPG response.
-
FUNCTION
Single-channel analog function generator in the MATHS family. Generates triggered or continuous voltage functions with VC rise and fall times, variable response curve, cycle mode for LFO use, plus End-of-Rise and End-of-Cycle gate outputs and a Hang input.
-
Jumbler
A six-channel all-analog signal combiner and distributor with 36 VCAs arranged as a 6×6 matrix. Two macro controls — Rotate (cyclic routing permutation) and Radiate (diffusion into adjacent outputs) — reconfigure up to six input signals across six outputs with smooth crossfading transitions. Useful for waveform blending, gate/clock recombination, effects re-routing, and CV distribution.
-
LxD
The LxD (Low Strike Duo) is a dual-response, two-channel, direct-coupled Low Pass Gate using vactrols for simultaneous amplitude and frequency control. CH1 is 12dB/oct mildly-resonant; CH2 is 6dB/oct non-resonant. CH1 output normalled to CH2 input.
-
MATHS
MATHS is an analog computer designed for musical purposes, capable of generating linear, logarithmic, or exponential functions; integrating, attenuating, amplifying, and inverting signals; and performing analog logic (OR, SUM). Functions as envelope generator, LFO, slew limiter, VCO, and more.
-
Mimeophon
The Mimeophon is a stereo, multi-zone color audio repeater module by Make Noise and soundhack, coded by Tom Erbe. It morphs between Karplus, Flange, Chorus, Echo, Looping and everything in between, with full voltage control over time, space and color.
-
Morphagene
A next generation Tape and Microsound music module that uses Reels, Splices, and Genes to create new sounds from those that already exist, informed by Musique Concrète and Microsound techniques.
-
Multimod
DSP-based modulation utility that takes a single CV input and produces 8 phase- and speed-spread copies; generates internal LFOs when no signal is patched. Part of Make Noise's New Universal Synthesizer System.
-
MultiWAVE
8-channel dual wavetable oscillator for the New Universal Synthesizer System or any Eurorack modular synthesizer. Uses a single set of controls and macro modulation functions to generate eight unique audio waveforms at eight independent channel outputs. Each channel contains two independent wavetable oscillators (Osc A and Osc B).
-
Optomix
Two-channel Low Pass Gate using 4 vactrols for simultaneous voltage control over amplitude and frequency content, with DAMP, STRIKE, summing stage, and AUX input.
-
Pressure Points
A controller and analog sequencer played by hand. Touching gold-plated copper wire touch plates generates a gate signal, a pressure CV, and three tuned voltages for the activated stage.
-
QPAS
The Quad Peak Animation System (QPAS) is a stereo multimode filter module utilizing four state-variable filter cores, with Low Pass, High Pass, Band Pass, and Smile Pass outputs simultaneously available, a pre-filter stereo exponential VCA, and Radiate controls that spread and animate resonant peaks in stereo.
- René
-
Spectraphon
The Make Noise/soundhack Spectraphon is a dual Spectral Oscillator coded by Tom Erbe of soundhack, the first module built by Make Noise on their new digital hardware platform engineered by Jeff Snyder and Tony Rolando. It uses real-time spectral analysis and resynthesis to create new sounds from those that already exist, inspired by spectral processors, additive synthesis, vocoders, and resonators including the Buchla 296 and Touché, in the lineage of the Buchla 259 and Make Noise DPO. Each of the two sides (A and B) operates independently in Spectral Amplitude Modulation (SAM) or Spectral Array Oscillation (SAO) mode.
-
Wogglebug
Random voltage generator originally designed by Grant Richter of Wiard Synthesizers. An evolution of the Buchla Model 265 Source of Uncertainty lineage, generating correlated stepped, smooth, and woggle CVs plus two audio-rate VCOs, a ring-mod output, a burst gate output, and a clock output — all from one internal chaotic core.
-
Erbe-Verb
A unique, modeless, continuously variable stereo algorithmic reverb with complete voltage control. Mono In, Stereo Out, all-analog dry path, 24-bit 48kHz DSP. Co-designed with Tom Erbe of Soundhack.
-
MMG
A vactrol-based, Voltage-Controlled Filter and Low Pass Gate using the QMMG core. Bridges Far East and West Coast synthesis styles, allowing for highly-resonant acidic squelch and organic, percussive animations simultaneously. Features smooth voltage-controlled sweep between Low Pass and High Pass responses, voltage-controlled Q factor with AGC, Strike input for LPG-style behavior, and Accent input for X0X-style punch.
- Phonogene
-
QMMG
Quad Multi-Mode Gate: a four-channel vactrol-based gate/filter with VCA, Low-Pass Gate, Low-Pass Filter, and High-Pass Filter modes per channel, voltage-controlled feedback, direct coupling, normalizations for bandpass and complex filter configurations, and a summed Mix Out.
- Ch.Svr ↗
- DPO ↗
- Echophon ↗
- GTE ↗
- modDemix ↗
- Plexiphon ↗
- PoliMATHS ↗
- PrssPnt ↗
- QXG ↗
- STO ↗
- TEMPI ↗
- X-PAN ↗
- XOH ↗
- XPO ↗
- Analog Memory ↗
- BRAINS ↗
- Contour ↗
- Dynamix ↗
- FXDf ↗
- MATHS (Classic) ↗
- modDemix (Classic) ↗
- René (Classic) ↗
- Rosie ↗
- RxMx ↗
- Teleplexer ↗
- tELHARMONIC ↗
- Wiard Wogglebug ↗
- MultiWAVE MIDI Inlet ↗
- MULT ↗
- N.U.S.S. Bundle ↗