make-noise/bruxa
Bruxa
Multi-tap delay line with over a dozen unique feedback paths and multiple filters within those feedback paths, aligned to allow for accumulation of noise, saturation and signal degradation. A collaboration between Make Noise and Alessandro Cortini, sharing origins with Strega's Time/Filter Experiment.679
Capabilities 3
- CV Output (Envelope / Trigger / 1V/Oct)cv-output
- 679
- Multi-Tap Delaymulti-tap-delay
- Multi-tap delay line with over a dozen unique feedback paths and multiple filters aligned for noise, saturation and signal degradation accumulation.679
- Self-patching / feedbackself-patching
- Interference CV and CV Out outputs derived from the Time/Filter circuit can be patched back into Time, Filter or Absorb inputs to allow the module to influence itself.679
Jacks 11 (8 in / 3 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (8) | |||
| Absorb CV Input | cv | — | Direct coupled CV Input for Absorb.679 |
| Blend CV Input | cv | — | 679 |
| Decay CV In | cv | — | Direct coupled CV input for Decay.679 |
| Filter CV In | cv | — | Attenuated direct coupled bipolar CV input for Filter.679 |
| Signal Input | audio | — | 679 |
| Time CV In | cv | — | Attenuated direct coupled, bipolar CV input for Time.679 |
| Time Modulation CV Input | cv | — | Attenuated AC coupled modulation input for Time. Typical input 10vpp.679 |
| Time Unity CV In | cv | -10V to 10V | Full Scale control input for Time, range +/-10vDC. Be careful.679 |
| Outputs (3) | |||
| CV Out | cv | — | DC Voltage Feedback signal from the Time/Filter circuit. Indicated visually on the T/F Activity Window.679 |
| Interference CV | cv | — | Control signal derived from the Time/Filter experiment; creates an additional feedback path when patched into Time, Filter or Absorb, allowing the module to influence itself.679 |
| Output | audio | — | 679 |
Parameters 11
| Name | Type | Range | Behavior |
|---|---|---|---|
| Absorb CV Attenuverter | knob | — | Attenuated direct coupled bipolar attenuverter for Absorb CV Input.679 |
| Absorb Panel Control | knob | — | 679 |
| Blend | knob | — | Blends between the Signal Input and the Time/Filter experiment (Dry/Wet Mix).679 |
| Decay Panel Control | knob | — | Sets the iterations of the Time/Filter experiment. Ranges from a handful to infinity.679 |
| Filter | knob | — | Removes unwanted substance from the results of the Time/Filter experiment.679 |
| Filter CV Attenuverter | knob | — | Bipolar attenuator for Filter CV In.679 |
| Input Level | knob | — | Sets the level of the incoming signal at the Signal Input.679 |
| Time Coarse | knob | — | Wide range adjustment for the rate at which audio signals are poured into the filter.679 |
| Time CV Attenuverter | knob | — | Bipolar attenuator for Time CV In.679 |
| Time Fine | knob | — | Short range precision adjustment for the rate at which audio signals are poured into the filter.679 |
| Time Modulation attenuator | knob | — | Sets the depth of Time Modulation from the Time Modulation CV Input.679 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [679]
- [680]