A 6-channel polyphonic time-shifting module offering human and machine clock programming, preset state storage, and complex clocking arrangements in a modular synthesizer.880
Capabilities 4
Clock Dividerclock-divider
Each channel can be set to divide the leading tempo by integer or non-integer values up to 32 using machine or human programming.880
Clock Generatorclock-generator
Generates 6 independent clock outputs as multiples or divisions of a leading tempo, which can be set via tap, external clock, or CV.880
Clock Modulatorclock-modulator
Supports phase shifting, shift-register style clock value rotation between channels, and run/stop modulation via the Mod Gate input.880
Clock Multiplierclock-multiplier
Each channel can be set to multiply the leading tempo by integer or non-integer values up to 32 using machine or human programming.880
Jacks 10 (4 in / 6 out)
Name
Signal
Voltage
Description
Inputs (4)
External Leading Tempo Input
clock
—
Accepts an external clock signal that becomes the leading tempo after 2 received pulses; drives all 6 channel outputs as multiples or divisions of this incoming clock.880
Mod Gate Input
gate
—
Gate input that triggers shift or run/stop behaviors on mod-enabled channels, as programmed on the Program Edit page.880
State Select CV Input
cv
0V to 5V
CV input (0–5V) for absolute state selection; when tap tempo is disabled, also controls leading tempo. Takes priority over State Select Gate.880
State Select Gate Input
gate
—
Gate input that increments the active state on each rising edge, allowing sequential state stepping through stored configurations.880
Sets how strictly human-tapped rhythms relate to the Leading Tempo's phase and multiplier/divisor. Three levels: 100% (strictest, same as machine coarse), 50% (default), 25% (most free, equivalent to machine fine adjustment).880
MOD Input Behavior
menu_setting
—
Sets the Mod input response to either Momentary (channels run while gate is high, stop when low) or Toggled (channels alternate between run and stop on each rising edge).880
PGM_A
button
—
Provides access to mute page, machine divisor programming, phase decrement, state edit, and bank edit functions depending on press combinations.880
PGM_B
button
—
Provides access to mod page, machine multiplier programming, phase increment, state edit, and program edit functions depending on press combinations.880
Run/Stop Mode
menu_setting
—
Selects the run/stop behavior for mod-enabled channels: Run/Stop (gate-controlled run), Run/Stop All (all channels run on gate high), Alt Run (mod-enabled and disabled channels have inverse behavior), or Off.880
Select CV Attenuator
knob
—
Attenuates incoming State Select CV signal; when no CV is patched, acts as a standalone panel control for manual state selection. Also sets Leading Tempo when tap tempo is disabled.880
Enhances TEMPI's relationship with René via the Select Bus.880
tempi60
—
Adds voltage-controlled tempo option, improved Select Bus communication with René (multi-paste, Store, Mesh while following), improved Run/Stop functionality with Toggled/Momentary options replacing Jumbled/Unjumbled, updated bank colors to match René, changed Store behavior to require explicit save, and minor bug fixes.880