noise-engineering/desmodus-versio
Noise Engineering Desmodus Versio Reverb
10 HP reverb by Noise Engineering: 10 inputs, 2 outputs, 10 controls, 6 modes.
Inputs 10
| Jack | What it does | Range | Connections |
|---|---|---|---|
| In L 559 | left audio input audio | — | → reverb tank |
| In R 559 | right audio input audio | — | normalled from In L → reverb tank |
| FSU 559 | FSU gate input gate | threshold 2 V | → FSU, reverb tank |
| Size CV 559 | Size modulation cv | 0 to 5 V | → Size |
| Blend CV 559 inferred from the documents | Blend modulation cv | 0 to 5 V | → Blend |
| Tone CV 559 inferred from the documents | Tone modulation cv | 0 to 5 V | → Tone, tank filter |
| Regen CV 559 inferred from the documents | Regen modulation cv | 0 to 5 V | → Regen |
| Speed CV 559 inferred from the documents | Speed modulation cv | 0 to 5 V | → Speed, internal LFO |
| Index CV 559 inferred from the documents | Index modulation cv | 0 to 5 V | → Index |
| Dense CV 559 inferred from the documents | Dense modulation cv | 0 to 5 V | → Dense |
The documents don't state: voltage (In L, In R, FSU); polarity (Size CV, Blend CV, Tone CV, Regen CV, Speed CV, Index CV, Dense CV); scaling, audio rate, impedance (all inputs); coupling (In L, In R, Size CV, Blend CV, Tone CV, Regen CV, Speed CV, Index CV, Dense CV).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Out L 559 | left stereo output audio | — | from reverb tank |
| Out R 559 | right stereo output audio | — | from reverb tank |
The documents don't state: voltage, coupling, impedance (all outputs).
Controls 10
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Blend 559 | dry/wet balance knob | Out L, Out R | — |
| Tone 559 | tank filter LP/HP knob · bipolar | tank filter |
|
| Regen 559 | tank feedback amount knob | reverb tank |
|
| Speed 559 | internal LFO speed knob | internal LFO | — |
| Index 559 | LFO amount to delays knob · bipolar | internal LFO, reverb tank |
|
| Size 559 | reverb delay time knob | reverb tank | — |
| Dense 559 | delay line spacing knob | reverb tank |
|
| FSU 559 | max Regen, mute input button | Regen, reverb tank | — |
| LIM/DST/SHM 559 | reverb style switch | reverb tank |
|
| BND/LRP/JMP 559 | delay line modulation response switch | reverb tank |
|
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| reverb tank | synthetic tail generator reverb | Reverb | In L, In R, FSU, Size CV, Blend CV, Regen CV, Dense CV | Blend, Regen, Size, Dense, FSU, LIM/DST/SHM, BND/LRP/JMP | Out L, Out R | 559 |
| tank filter | filter in reverb tank | Filter | Tone CV | Tone | — | 559 |
| internal LFO | LFO | LFO | Speed CV, Index CV | Speed, Index | — | 559 |
Modes 6
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| LIM | reverb style | LIM/DST/SHM = LIM | — | 559 |
| DST | reverb style | LIM/DST/SHM = DST | — | 559 |
| SHM | reverb style | LIM/DST/SHM = SHM | — | 559 |
| BND | delay modulation response | BND/LRP/JMP = BND | — | 559 |
| LRP | delay modulation response | BND/LRP/JMP = LRP | — | 559 |
| JMP | delay modulation response | BND/LRP/JMP = JMP | — | 559 |
Specs 9
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| audio inputs | clipping level | 16 V peak-to-peak | — | 559 |
| module | width | 10 HP | — | 559 |
| module | depth | 1.5 inches | — | 559 |
| SHM | pitch shift | 1 octaves | — | 559 |
| power | +12V current | 70 mA | old version | 559 |
| power | -12V current | 70 mA | old version | 559 |
| power | +12V current | 125 mA | new version | 559 |
| power | -12V current | 10 mA | new version | 559 |
| power | +5V current | 0 mA | — | 559 |
Properties 9
| Subject | Property | Value | Source |
|---|---|---|---|
| module | channel configuration | stereo or mono-in/stereo-out | 559 |
| pots | CV combination | summed with CV | 559 |
| module | platform | Versio DSP platform | 559 |
| module | firmware | USB swappable | 559 |
| module | open-source firmware | supported | 559 |
| LIM | tank feedback containment | limiting | 559 |
| DST | tank feedback containment | saturation | 559 |
| SHM | algorithm | octave pitch shift feedback | 559 |
| internal LFO | waveforms | random or sine | 559 |
Behavior 9
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| In R | unpatched | takes In L signal | — | 559 |
| Blend | fully left | dry input only | — | 559 |
| Blend | fully right | processed signal only | — | 559 |
| Tone | at center | filter disabled | — | 559 |
| Index | at center | LFO disabled | — | 559 |
| Regen | above about 12 o'clock | 100% feedback, infinite tail | — | 559 |
| Regen | past 3 o'clock | tail ducked by new input | — | 559 |
| FSU | button pressed or gate high | Regen maxed, input muted | — | 559 |
| FSU | gate goes low | infinite hold released | — | 559 |
Functions 4
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Reverb | block | patchable | block reverb tank: synthetic tail generator reverb | 559 |
| Stereo Inputs / Outputs | jack | patchable | jacks In L/In R, Out L/Out R stereo pair | 559 |
| Freeze / Hold | control | patchable | control/jack FSU: maxes Regen, mutes input (infinite tail) | 559 |
| Delay | documented use | patchable | documented: 'from a delay to a reverb'; Dense left sounds like delay | 559 |
Power
| +12 V | 125 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | 0 mA |
| Width | 10 HP |
| Depth | 38 mm |
Other Reverb modules
Sources 2
-
[559]
Noise Engineering Desmodus Versio Manual ↗manual · primary⚠ verified 2026-05-20 · the manufacturer changed this document since
-
[560]
Noise Engineering Desmodus Versio product page ↗product page⚠ verified 2026-05-20 · the manufacturer changed this document since