bastl-instruments/basil

Bastl Instruments Basil Delay · Distortion / Saturation

8 HP delay and distortion / saturation by Bastl Instruments: 7 inputs, 2 outputs, 10 controls, 9 modes.

Bastl Instruments · Bastl Basil Manual (PDF) ↗

Delay · Stereo Inputs / Outputs · Freeze / Hold · Tempo / Clock Sync · 1V/Oct Pitch Tracking · Distortion / Saturation · Reverb · Attenuverter / Offset

Inputs 7

Inputs
JackWhat it doesRangeConnections
L IN 1126left audio input
audio
—
→ delay
R IN 1126right audio input
audio
—
normalled from L IN
→ delay
DELAY V/OCT 1126delay time V/oct
pitch, cv
scaling v oct
→ delay TIME
SYNC 1126clock sync input
clock
-6 to 6 V
→ delay TIME
CTRL CV 1126assignable CV
cv
-6 to 6 V
→ CTRL destination
attenuated by CTRL
SPACE CV 1126selected SPACE flavor CV
cv
—
→ SPACE section
FEEDBACK CV 1126feedback CV
cv
—
→ FEEDBACK
selected by feedback jumper = CV input

The documents don't state: voltage (L IN, R IN, DELAY V/OCT, SPACE CV, FEEDBACK CV); threshold (SYNC); coupling (L IN, R IN); impedance (all inputs).

Outputs 2

Outputs
JackWhat it doesRangeConnections
L OUT 1126left output
audio
—
from delay
R OUT 1126right output
audio
—
from delay

The documents don't state: voltage, coupling, impedance (all outputs).

Controls 10

Controls
ControlWhat it doesAffectsPositions
DELAY 1126delay TIME/STEREO/FINE
knob
delay
In 3 modes
  • TIME: main delay time → delay TIME
  • STEREO: L/R time spread → delay STEREO
  • FINE: fine delay time → delay FINE
DELAY button 1126select DELAY knob function
button
DELAY
  • short press: toggle TIME/STEREO
  • long press: FINE adjustment
SPEED button 1126sample rate select
button
delay
  • no light: full speed
  • HALF: half speed
  • hold 2 s: toggle RANGE mode
  • RANGE: quarter/eighth speeds
FREEZE button 1126freeze buffer
button
delay
  • press: toggle FREEZE
  • hold >2 s: toggle LO-FI
SPACE button 1126cycle SPACE flavor
button
SPACE section
  • BLUR: diffusion flavor
  • FILTER: feedback filter flavor
  • TAPS: multi-tap flavor
SPACE fader 1126SPACE flavor intensity
fader · bipolar
SPACE section
In 3 modes
  • BLUR: left pre-feedback, right in-feedback → BLUR
  • FILTER: left low-pass, right high-pass → FILTER
  • TAPS: left odd+even, right even → TAPS
DRY/WET 1126dry/wet crossfade
fader
L OUT, R OUT
  • DRY: clean input
  • WET: fully delayed signal
FEEDBACK 1126feedback amount
knob · bipolar
delay
  • right of 12: normal feedback
  • left of 12: ping pong feedback
CTRL 1126assignable control
knob · bipolar
TIME, STEREO, FINE, SPEED, DRY/WET, FEEDBACK, FREEZE, LO-FI, BLUR, FILTER, TAPS—
feedback jumper 1126FEEDBACK input vs PULSE
jumper
FEEDBACK CV
  • CV input: FEEDBACK CV input
  • PULSE: pulse output (Oscillator)

Blocks 8

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
delaydigital stereo delayDelayL IN, R IN, DELAY V/OCT, SYNC, FEEDBACK CVDELAY, DELAY button, SPEED button, FREEZE button, FEEDBACK, DRY/WETL OUT, R OUT1126
SPACE sectionBLUR, FILTER, TAPS—SPACE CVSPACE button, SPACE fader—1126
BLURdiffusion——SPACE fader—1126
FILTERfeedback filterFilter—SPACE fader—1126
TAPSmulti-tap read heads——SPACE fader—1126
feedback compressor/overdrivefeedback path limiterCompressor / dynamics, Distortion / saturation———1126
anti-aliasing filterlow-pass anti-aliasing filterFilter———1126
CTRLassignable control—CTRL CVCTRL—1126

Modes 9

Modes
ModeKindSelected bySelection methodSource
HALF speedsample rate—SPEED button press1126
RANGEextended speed range—hold SPEED 2 s1126
FREEZEbuffer loop—FREEZE button press1126
LO-FIanti-aliasing off—hold FREEZE >2 s1126
ping pongfeedback routing—FEEDBACK left of 121126
Hyper-SPACEall SPACE flavors active—hold SPEED+FREEZE at startup1126
ASSIGNMENTCTRL destination select—hold SPACE few seconds1126
V/OCT CALIBRATIONcalibration—hold SPACE and DELAY1126
syncclocked delay—cable in SYNC1126

Hidden functions 11

Hidden functions
FunctionTriggerAffectsSource
FINE delaylong press DELAY buttonDELAY1126
RANGE modehold SPEED 2 sSPEED button1126
LO-FIhold FREEZE >2 santi-aliasing filter1126
CTRL assignmenthold SPACE, press nearest buttonCTRL1126
Hyper-SPACEhold SPEED+FREEZE at startupSPACE section1126
V/OCT calibrationhold SPACE+DELAYDELAY V/OCT1126
V/OCT quantize toggleSPACE in calibration modeDELAY V/OCT1126
firmware updatehold DELAY at powerup—1126
reset user settingshold SPACE at powerupFINE, CTRL1126
factory resethold SPACE+FREEZE at powerup—1126
factory test modehold SPACE+SPEED at powerup—1126

Specs 13

Specs
SubjectQuantityValueConditionSource
delaymax sample rate41.66 kHz—1126
delaybit depth16 bit—1126
delaymax delay time0.5 sstereo, full speed1126
delaymax delay time1 smono via ping-pong1126
delaymax delay time1 shalf speed1126
delaymax delay time2 squarter speed1126
delaymax delay time4 seighth speed1126
STEREOright/left time ratio0.5 ratiofully CW1126
SYNCclock divisions0.125 to 32 divisionSYNC patched1126
modulewidth8 HP—1127
moduledepth24 mm—1127
modulecurrent +12V90 mA—1127
modulecurrent -12V20 mA—1127

Properties 9

Properties
SubjectPropertyValueSource
DRY/WETcurveconstant power1126
FEEDBACK pathlimitingcompressor and overdrive1126
DELAY V/OCTresponsedouble voltage, half time1126
TIME knobdirectionlongest left1126
feedbackcompensationconstant decay, short times1126
FILTER/BLUR/DRY/WETsample ratealways maximum1126
CTRLassignmentalways one destination1126
hardwareplatformBastl Pizza1126
firmware updateinterfacemicro USB1126

Behavior 17

Behavior rules
SubjectWhenEffectModeSource
R INunpatchedcopies L IN—1126
SYNCcable detectedTIME quantized to divisions—1126
FINEappliedafter sync quantization—1126
FINESYNC plugged/unpluggedreset to zero—1126
STEREOfully CCWL and R identical—1126
anti-aliasing filterlower speedsremoves high frequencies—1126
anti-aliasing filterLO-FI ondisabled—1126
FREEZEactiveinput disconnected, buffer loops—1126
FREEZEactiveBLUR/FILTER/TAPS/SPEED still work—1126
SPACE fadercenteredno effect—1126
SPACE faderSPACE button pressedfrozen until movedHyper-SPACE1126
TAPSfader at extremestaps enter feedback—1126
FEEDBACKmaximumhits limiter, stays controlled—1126
CTRL knobCTRL CV patchedacts as attenuverter—1126
SPEED as CTRL destinationCV appliedselects four sample rates—1126
FEEDBACK CVjumper not CV positioninput not functional—1126
boot2 flashes near FREEZEV/OCT needs recalibration—1126

Functions 8

Function tags
FunctionBasisScopeEvidenceSource
Delayblockpatchabledigital stereo delay1126
Stereo Inputs / OutputsjackpatchableL/R IN and L/R OUT1126
Freeze / HoldcontrolpatchableFREEZE button loops buffer1126
Tempo / Clock SyncjackpatchableSYNC jack quantizes delay time1126
1V/Oct Pitch TrackingjackpatchableDELAY V/OCT input1126
Distortion / SaturationmodepatchableLO-FI downsampled setting1126
Reverbdocumented usepatchabledocumented: BLUR reverb-type effects1126
Attenuverter / OffsetcontrolinternalCTRL knob attenuverts CTRL CV1126

Power

+12 V90 mA
−12 V20 mA
+5 V—
Width8 HP
Depth24 mm

Other Delay modules

All Delay modules →

Firmware 1

VersionReleasedNotes
v1.0—First public release firmware. The RANGE light is ON at startup to indicate this version.1126

Sources 2

  1. [1126]
    Bastl Basil Manual ↗manual · primary
    ● verified 2026-06-03
  2. [1127]
    Bastl Basil product page ↗product page
    ⚠ verified 2026-06-03 · the manufacturer changed this document since