doepfer/a-199
Doepfer A-199 Reverb
8 HP reverb by Doepfer: 2 inputs, 2 outputs, 4 controls.
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio In 1862 | audio input audio | audio rate yes | → reverb system, mix attenuated by Level |
| ext. Feedb. In 1862 | external feedback input audio | audio rate yes | normalled from Reverb Out → feedback path, reverb system attenuated by Feedback |
The documents don't state: voltage, coupling, impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Reverb Out 1862 | pure reverb signal audio | audio rate yes | from reverb system, emphasis |
| Mix Out 1862 | original plus reverb audio | audio rate yes | from mix |
The documents don't state: voltage, coupling, impedance (all outputs).
Controls 4
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Level 1862 | input level attenuator knob · 0 to 10 | Audio In, reverb system | — |
| Feedback 1862 | reverb feedback amount knob · 0 to 10 | feedback path, ext. Feedb. In | — |
| Emphasis 1862 | middle frequency accentuation knob · 0 to 10 | emphasis, Reverb Out | — |
| Mix 1862 | original/reverb relation knob · 0 to 10 | mix, Mix Out | — |
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| reverb system | 3-spring system | Reverb | Audio In, ext. Feedb. In | Level, Feedback, Emphasis | Reverb Out | 1862 |
| emphasis | middle frequency accentuation | Filter | — | Emphasis | Reverb Out | 1862 |
| feedback path | feedback loop | — | ext. Feedb. In | Feedback | — | 1862 |
| mix | original/reverb mix | Crossfader / panner | Audio In | Mix | Mix Out | 1862 |
Specs 12
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | since summer 2007 | 1863 |
| module | width | 10 HP | before summer 2007 | 1863 |
| module | width | 40.3 mm | — | 1863 |
| module | depth | 50 mm | without reverb system | 1863 |
| module | +12V current | 80 mA | — | 1863 |
| module | -12V current | 10 mA | — | 1863 |
| emphasis | center frequency | 2000 Hz | — | 1862 |
| emphasis | relative gain | 1 ratio | at 300 Hz | 1862 |
| emphasis | relative gain | 1.6 ratio | at 1.0 kHz | 1862 |
| emphasis | relative gain | 0.8 ratio | at 10 kHz | 1862 |
| reverb system | spring count | 3 springs | — | 1862 |
| reverb system | tank size | 5 to 20 cm | about 20 x 7 x 5 cm | 1863 |
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| reverb system | technology | mechanical spring tank | 1862 |
| reverb system | connection | 2 RCA phono cables | 1862 |
| Feedback | self-oscillation | yes | 1862 |
| reverb system | magnetic field sensitivity | high | 1862 |
| Level | dry signal | not attenuated | 1863 |
| ext. Feedb. In | socket type | switched socket | 1863 |
| reverb system | external mounting | possible | 1863 |
Behavior 7
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| ext. Feedb. In | unpatched | Reverb Out fed back | — | 1862 |
| internal feedback path | plug in ext. Feedb. In | internal feedback interrupted | — | 1862 |
| Feedback | external feedback patched | attenuates external feedback signal | — | 1862 |
| Feedback | turned high | springs self-oscillate | — | 1862 |
| Level | always | effect path only | — | 1863 |
| reverb system | near power transformer | hum noise | — | 1862 |
| reverb system | transport foam not removed | module will not work | — | 1862 |
Functions 2
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Reverb | block | patchable | block reverb system: 3-spring reverb | 1862 |
| Send / return | jack | patchable | jack ext. Feedb. In: external feedback loop | 1862 |
Power
| +12 V | 80 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 50 mm |
Other Reverb modules
Sources 2
- [1862]
- [1863]