cutlasses/gloop
Cutlasses Instruments Gloop Audio Buffer Recording / Looper · Delay
16 HP audio buffer recording / looper and delay by Cutlasses Instruments: 6 inputs, 2 outputs, 41 controls, 7 modes.
Cutlasses Instruments · Cutlasses Gloop Manual v1.3.0 (PDF) ↗
Audio Buffer Recording / Looper · Delay · Reverb · Distortion / Saturation · Wavefolder · Reverse playback · Stereo Panning · Granular Processing · 1V/Oct Pitch Tracking
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio In 202 | audio input audio | — | → loop buffer, Outputs |
| Trigger Input 202 | record/overdub trigger trigger | threshold 3 V | → loop buffer |
| CV 1 202 | assignable CV target cv, pitch, trigger | -5 to 5 V | → Play Head 1, Play Head 2, Play Head 3, Play Head 4 attenuated by CV Attenuation 1 In 8 modes
|
| CV 2 202 | assignable CV target cv, pitch, trigger | -5 to 5 V | → Play Head 1, Play Head 2, Play Head 3, Play Head 4 attenuated by CV Attenuation 2 In 8 modes
|
| CV 3 202 | assignable CV target cv, pitch, trigger | -5 to 5 V | → Play Head 1, Play Head 2, Play Head 3, Play Head 4 attenuated by CV Attenuation 3 In 8 modes
|
| CV 4 202 | assignable CV target cv, pitch, trigger | -5 to 5 V | → Play Head 1, Play Head 2, Play Head 3, Play Head 4 attenuated by CV Attenuation 4 In 8 modes
|
The documents don't state: voltage (Audio In, Trigger Input); impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio Out A 202 | audio output A audio | — | from Play Head 1, Play Head 2, Play Head 3, Play Head 4, Outputs |
| Audio Out B 202 | audio output B audio | — | from Play Head 1, Play Head 2, Play Head 3, Play Head 4, Outputs |
The documents don't state: voltage, impedance (all outputs).
Controls 41
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Menu Button 202 | cycle through menus button | Menus | — |
| Encoder 1 202 | play head position/selection knob | Play Head 1, Play Head 2, Play Head 3, Play Head 4 |
|
| Encoder 2 202 | loop segment size knob | Play Head 1, Play Head 2, Play Head 3, Play Head 4 |
|
| Encoder 3 202 | jitter / direction knob · 0 to 9 | Play Head 1, Play Head 2, Play Head 3, Play Head 4 |
|
| Encoder 4 202 | speed / pitch knob | Play Head 1, Play Head 2, Play Head 3, Play Head 4 |
|
| Pot 1 202 | play head 1 volume knob | Play Head 1 | — |
| Pot 2 202 | play head 2 volume knob | Play Head 2 | — |
| Pot 3 202 | play head 3 volume knob | Play Head 3 | — |
| Pot 4 202 | play head 4 volume knob | Play Head 4 | — |
| Record/Overdub Button 202 | record / overdub button | loop buffer | — |
| Clear Loop Button 202 | clear loop (hold) button | loop buffer, Play Head 1, Play Head 2, Play Head 3, Play Head 4 | — |
| TIME 202 | delay time menu setting · 5 to 500 ms | delay effect | — |
| FEED 202 | delay feedback menu setting | delay effect | — |
| MIX 202 | delay mix menu setting | delay effect | — |
| RVB 202 | reverb level menu setting | reverb | — |
| BCDE 202 | bit crush depth menu setting · 1 to 32 bit | Bit Crusher | — |
| BCRA 202 | sample rate divider menu setting | Bit Crusher | — |
| BCMO 202 | bit crusher position menu setting | Bit Crusher |
|
| CRSF 202 | loop crossfade time menu setting · 5 to 1000 ms | Play Head 1, Play Head 2, Play Head 3, Play Head 4 | — |
| IN A 202 | input to Output A menu setting | Audio In, Audio Out A | — |
| IN B 202 | input to Output B menu setting | Audio In, Audio Out B | — |
| MEFF 202 | mono effects output menu setting | delay effect, reverb |
|
| DEGR 202 | loop degrade amount menu setting | Degrade path | — |
| WOBB 202 | wow and flutter menu setting | Tape, Play Head 1, Play Head 2, Play Head 3, Play Head 4 | — |
| SAT 202 | tape saturation menu setting | Tape | — |
| HISS 202 | tape hiss menu setting | Tape | — |
| AGE 202 | random drop-outs menu setting | Tape | — |
| MODE 202 | wavefold position menu setting | Wavefold |
|
| TYPE 202 | wave fold algorithm menu setting | Wavefold |
|
| GAIN 202 | wavefold input gain menu setting · 1 to 15 x | Wavefold | — |
| PAN1 202 inferred from the documents | head 1 pan menu setting | Play Head 1, Audio Out A, Audio Out B |
|
| PAN2 202 inferred from the documents | head 2 pan menu setting | Play Head 2, Audio Out A, Audio Out B |
|
| PAN3 202 | head 3 pan menu setting | Play Head 3, Audio Out A, Audio Out B |
|
| PAN4 202 inferred from the documents | head 4 pan menu setting | Play Head 4, Audio Out A, Audio Out B |
|
| CV Target 202 | CV modulation target menu setting | CV 1, CV 2, CV 3, CV 4 | — |
| CV Attenuation 1 202 | CV 1 attenuation menu setting | CV 1 | — |
| CV Attenuation 2 202 | CV 2 attenuation menu setting | CV 2 | — |
| CV Attenuation 3 202 | CV 3 attenuation menu setting | CV 3 | — |
| CV Attenuation 4 202 | CV 4 attenuation menu setting | CV 4 | — |
| OFFS 202 | offset all CV inputs menu setting | CV 1, CV 2, CV 3, CV 4 | — |
| WRTE 202 | write mode menu setting | loop buffer |
|
Blocks 13
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| loop buffer | looper | Looper | Audio In, Trigger Input | Record/Overdub Button, Clear Loop Button, WRTE | — | 202 |
| write head | write head | — | Audio In, Trigger Input | Record/Overdub Button | — | 202 |
| Play Head 1 | play head | — | CV 1, CV 2, CV 3, CV 4 | Encoder 1, Encoder 2, Encoder 3, Encoder 4, Pot 1, PAN1 | Audio Out A, Audio Out B | 202 |
| Play Head 2 | play head | — | CV 1, CV 2, CV 3, CV 4 | Encoder 1, Encoder 2, Encoder 3, Encoder 4, Pot 2, PAN2 | Audio Out A, Audio Out B | 202 |
| Play Head 3 | play head | — | CV 1, CV 2, CV 3, CV 4 | Encoder 1, Encoder 2, Encoder 3, Encoder 4, Pot 3, PAN3 | Audio Out A, Audio Out B | 202 |
| Play Head 4 | play head | — | CV 1, CV 2, CV 3, CV 4 | Encoder 1, Encoder 2, Encoder 3, Encoder 4, Pot 4, PAN4 | Audio Out A, Audio Out B | 202 |
| Outputs | equal-power pan | Mixer, Crossfader / panner | — | PAN1, PAN2, PAN3, PAN4, IN A, IN B | Audio Out A, Audio Out B | 202 |
| delay effect | mono delay | Delay | — | TIME, FEED, MIX, MEFF | Audio Out A, Audio Out B | 202 |
| reverb | mono reverb | Reverb | — | RVB, MEFF | Audio Out A, Audio Out B | 202 |
| Bit Crusher | bit crush | Distortion / saturation | — | BCDE, BCRA, BCMO | Audio Out A, Audio Out B | 202 |
| Degrade path | loop degrade | — | — | DEGR | — | 202 |
| Tape | tape effects | Distortion / saturation | — | WOBB, SAT, HISS, AGE | Audio Out A, Audio Out B | 202 |
| Wavefold | wave folding | Waveshaper / wavefolder | — | MODE, TYPE, GAIN | Audio Out A, Audio Out B | 202 |
Modes 7
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| none | write mode | WRTE = none | WRTE menu | 202 |
| ovdb | write mode overdub | WRTE = ovdb | WRTE menu | 202 |
| repl | write mode replace | WRTE = repl | WRTE menu | 202 |
| Ratio | speed type | Encoder 4 = press | press Encoder 4 | 202 |
| Semitones | speed type | Encoder 4 = press | press Encoder 4 | 202 |
| grid mode | loop slicing | — | — | 204 |
| calibration | calibration screen | — | hold Menu at power-up | 202 |
Specs 20
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | current +12V | 165 mA | — | 202 |
| module | current -12V | 35 mA | — | 202 |
| audio | sample rate | 48 kHz | — | 202 |
| audio | bit depth | 24 bit | — | 202 |
| loop buffer | maximum loop length | 2 min | — | 202 |
| module | width | 16 HP | — | 204 |
| module | depth | 25 mm | — | 204 |
| play heads | count | 4 heads | — | 202 |
| delay effect | delay time | 5 to 500 ms | — | 202 |
| Bit Crusher | bit depth | 1 to 32 bit | — | 202 |
| CRSF | crossfade time | 5 to 1000 ms | — | 202 |
| Wavefold | input gain | 1 to 15 x | — | 202 |
| Jitter | level | 0 to 9 steps | — | 202 |
| Clear Loop Button | clear hold time | 2 s | — | 202 |
| Clear Loop Button | full reset hold time | 4 s | — | 202 |
| forced-jump crossfade | crossfade time | 5 ms | — | 203 |
| position modulation | update interval | 50 ms | — | 203 |
| pitch CV | range | 10 octaves | firmware 1.3.1 beta | 203 |
| speed CV | maximum speed adjustment | 10 x | ratio view | 202 |
| grid mode | regions | 4 to 16 regions | — | 204 |
Properties 12
| Subject | Property | Value | Source |
|---|---|---|---|
| play heads | simultaneous playback | all 4 always playing | 202 |
| panel controls | scope | Active Play Head only | 202 |
| Outputs | pan law | equal power | 202 |
| delay/reverb | channels | mono | 203 |
| bit crush/tape | channels | stereo | 203 |
| CV Attenuation | implementation | digital | 202 |
| CV inputs | out-of-range CV | clamped | 202 |
| speed CV | scaling | V/Oct in semitone view | 202 |
| speed CV | scaling | not V/Oct in ratio | 202 |
| play head | direction | forward or reverse | 202 |
| grid mode | grid sizes | 4, 8 or 16 | 204 |
| pot gain | law | logarithmic | 203 |
Behavior 22
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Gloop | no audio input | cannot generate sound | — | 202 |
| Record/Overdub Button | overdub enabled, subsequent presses | start/stop overdubbing | — | 202 |
| screen | recording | flashes | — | 202 |
| Trigger Input | trigger received | same as record press | — | 202 |
| WRTE none | record pressed or triggered | ignored | none | 202 |
| stl trigger | trigger arrives | head snaps to loop start | — | 202 |
| sto trigger | trigger arrives | loop plays once, stops | — | 202 |
| jmp CV | voltage changes | head jumps quantised position | — | 202 |
| OFFS | enabled | 0V read as -5V | — | 202 |
| CV Attenuation | at min | CV zeroed | — | 202 |
| CV inputs | above +/-5V | clipped | — | 202 |
| loop section | each cycle | crossfade end to start | — | 202 |
| crossfade | head forced outside loop | 5 ms crossfade | — | 203 |
| position modulation | faster than 20 Hz | sub-sampled | — | 203 |
| delay/reverb | MEFF not monitored channel | effects not heard | — | 202 |
| panned head | effects enabled | effects only on A or B | — | 202 |
| DEGR | each loop repeat | quieter, high-end rolled off | — | 202 |
| IN A/IN B | no loop recorded | input mix still applied | — | 203 |
| grid mode | enabled | positions and sizes quantised | — | 204 |
| Jitter | loop restarts | loop position moves | — | 202 |
| calibration | assembled unit | not normally needed | — | 202 |
| calibration | running | all 4 CVs together | — | 202 |
Functions 9
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Audio Buffer Recording / Looper | block | patchable | block loop buffer: record/overdub | 202 |
| Delay | block | patchable | block delay effect: TIME/FEED/MIX | 202 |
| Reverb | block | patchable | block reverb: RVB | 202 |
| Distortion / Saturation | block | patchable | block Bit Crusher; SAT tape saturation | 202 |
| Wavefolder | block | patchable | block Wavefold: sine/triangle folding | 202 |
| Reverse playback | control | patchable | Encoder 3 press: Forward/Reverse | 202 |
| Stereo Panning | control | patchable | PAN per head, CV pan target | 202 |
| Granular Processing | documented use | patchable | documented: granular style effects/loops | 202 |
| 1V/Oct Pitch Tracking | jack | patchable | CV speed V/Oct in semitone view | 202 |
Power
| +12 V | 165 mA |
|---|---|
| −12 V | 35 mA |
| +5 V | — |
| Width | 16 HP |
| Depth | 25 mm |
Other Audio Buffer Recording / Looper modules
Firmware 8
| Version | Released | Notes |
|---|---|---|
| 1.3.1 | — | Beta release. Added pitch modulation via CV spanning all 10 octaves; added screen reset (hold menu button 5 seconds) to recover from rare upside-down display bug. Fixed play head volume pots not reaching 0 (bleed when fully anti-clockwise).203 |
| 1.3 | — | Added bit crusher into degrade signal path (pre/post reverb options previously). Added wave folder effect (pre or post reverb). Play heads can be paused/restarted with a quick press of the white button. Replaced Overdub checkbox with Write Mode (none, overdub, replace).203 |
| 1.2.3 | — | Fixed issue when recording a loop of maximum length (2 minutes) where play heads would stop responding correctly.203 |
| 1.2.2 | — | Minor improvements to calibration. Holding record in the calibration screen now shows calibrated V/Oct values.203 |
| 1.2.1 | — | Fixed issue where audio level in was not respected when recording the initial loop.203 |
| 1.2.0 | — | Pan can now be a CV target. Text list encoders can be reset to first option by pressing encoder. Mono and stereo effects separated: MEFF applies only to mono effects (delay/reverb) to single channel; bitcrush and tape saturation now stereo. Tape Age split into HISS (tape hiss) and AGE (random dropouts); DEGR moved to Effects 3 page. Hold clear button 2 seconds to clear loop only; hold 4 seconds to also reset play head state. Fixed audio In level not respected during overdub.203 |
| 1.1.0 | — | Split tape effect into Wobble (WOBB), Saturation (SAT), and Age (AGE). Added equal-power panning per play head (rather than A/B or A+B). Added CRSF crossfade dial (5ms to 1 second). Fixed tape wobble being applied incorrectly. Fixed distortion when loop position modulation constantly restarted playhead (now sub-sampled at 20Hz). Improved logarithmic gain for pots and A/B input mix. Improved calibration menu.203 |
| 1.0.1 | — | Added Tape Degrade (DEGR) — lowers volume and rolls off high-end with each loop iteration. Input Mix A and B now applied when no loop is recorded (not just during playback). Tape effect now applies to all heads, not just head 0. Firmware version now shown as major and minor revision.203 |
Sources 3
- [202]
-
[203]
Cutlasses Gloop Firmware Changelog ↗firmware notes⚠ verified 2026-05-06 · the manufacturer changed this document since
-
[204]
Cutlasses Gloop product page ↗product page⚠ verified 2026-05-06 · the manufacturer changed this document since