smoothie-audio/smear
Smoothie Audio Smear Chorus / Flanger / Phaser
12 HP chorus / flanger / phaser by Smoothie Audio: 9 inputs, 2 outputs, 15 controls, 4 modes.
Inputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| In L 1970 | left input audio | — | → Section 1, Section 2 |
| In R 1970 | right input audio | — | normalled from In L → Section 1, Section 2 |
| Feedback CV 1970 | feedback amount CV cv, audio | -5 to 5 V, bipolar audio rate yes | → Feedback loop, Feedback |
| Frequency CV 1 1970 | frequency CV, section 1 cv, audio | -5 to 5 V, bipolar audio rate yes | → Section 1, Frequency 1 attenuated by Frequency CV depth 1 |
| Resonance CV 1 1970 | resonance CV, section 1 cv, audio | -5 to 5 V, bipolar audio rate yes | → Section 1, Resonance 1 attenuated by Resonance CV depth 1 |
| Tap CV 1 1970 | stages CV, section 1 cv, audio | -5 to 5 V, bipolar audio rate yes | → Section 1, Tap 1 |
| Frequency CV 2 1970 | frequency CV, section 2 cv, audio | -5 to 5 V, bipolar audio rate yes | → Section 2, Frequency 2 attenuated by Frequency CV depth 2 |
| Resonance CV 2 1970 | resonance CV, section 2 cv, audio | -5 to 5 V, bipolar audio rate yes | → Section 2, Resonance 2 attenuated by Resonance CV depth 2 |
| Tap CV 2 1970 | stages CV, section 2 cv, audio | -5 to 5 V, bipolar audio rate yes | → Section 2, Tap 2 |
The documents don't state: voltage (In L, In R); coupling (Feedback CV, Frequency CV 1, Resonance CV 1, Tap CV 1, Frequency CV 2, Resonance CV 2, Tap CV 2); impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Out L 1970 | left output audio | — | from Section 1, Section 2, Feedback loop |
| Out R 1970 | right output audio | — | from Section 1, Section 2, Feedback loop |
The documents don't state: voltage, impedance (all outputs).
Controls 15
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Frequency 1 1970 | where delay acts knob · 20 to 20000 Hz | Section 1 | — |
| Resonance 1 1970 | delay shape (Q) knob · 0.01 to 16 Q | Section 1 | — |
| Tap 1 1970 | number of stages fader · 2 to 98 poles | Section 1 | — |
| Frequency CV depth 1 1970 | frequency CV attenuverter knob · bipolar | Frequency CV 1 | — |
| Resonance CV depth 1 1970 | resonance CV attenuverter knob · bipolar | Resonance CV 1 | — |
| Frequency 2 1970 | where delay acts knob · 20 to 20000 Hz | Section 2 | — |
| Resonance 2 1970 | delay shape (Q) knob · 0.01 to 16 Q | Section 2 | — |
| Tap 2 1970 | number of stages fader · 2 to 98 poles | Section 2 | — |
| Frequency CV depth 2 1970 | frequency CV attenuverter knob · bipolar | Frequency CV 2 | — |
| Resonance CV depth 2 1970 | resonance CV attenuverter knob · bipolar | Resonance CV 2 | — |
| Feedback 1970 | global feedback amount knob | Feedback loop | — |
| Split 1970 | split / stereo series other | Section 1, Section 2 |
|
| feedback 1969 | feedback knob polarity menu setting | Feedback |
|
| taps1 1969 | Tap 1 stage list menu setting | Tap 1 | — |
| taps2 1969 | Tap 2 stage list menu setting | Tap 2 | — |
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Section 1 | 98-pole allpass filter | Phaser / all-pass network | Frequency CV 1, Resonance CV 1, Tap CV 1 | Frequency 1, Resonance 1, Tap 1, Frequency CV depth 1, Resonance CV depth 1 | — | 1969 |
| Section 2 | 98-pole allpass filter | Phaser / all-pass network | Frequency CV 2, Resonance CV 2, Tap CV 2 | Frequency 2, Resonance 2, Tap 2, Frequency CV depth 2, Resonance CV depth 2 | — | 1969 |
| Feedback loop | global feedback with limiter | — | Feedback CV | Feedback | — | 1969 |
Modes 4
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Split off | stereo series | Split = off | Split control | 1969 |
| Split on | dual mono | Split = on | Split control | 1969 |
| feedback unipolar | feedback polarity | feedback = unipolar | CONFIG.TXT | 1969 |
| feedback bipolar | feedback polarity | feedback = bipolar | CONFIG.TXT | 1969 |
Specs 26
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 12 HP | — | 1969 |
| module | depth | 30 mm | — | 1969 |
| module | +12V current | 108 mA | — | 1969 |
| module | -12V current | 70 mA | — | 1969 |
| module | +5V current | 0 mA | — | 1969 |
| module | sample rate | 48 kHz | — | 1969 |
| Tap | poles per section | 2 to 98 poles | — | 1969 |
| Tap | poles with config drive | ≤ 160 poles | — | 1969 |
| Tap | poles per section | 4 to 196 poles | Split on (dual mono) | 1969 |
| Frequency | range | 20 to 20000 Hz | — | 1969 |
| Frequency | at 50% position | 633 Hz | — | 1969 |
| Frequency | at 25% position | 113 Hz | — | 1969 |
| Frequency | at 75% position | 3560 Hz | — | 1969 |
| Resonance | Q range | 0.01 to 16 Q | — | 1969 |
| Resonance | Q at 50% position | 0.51 Q | — | 1969 |
| CV inputs | range | -5 to 5 V | full control travel | 1969 |
| Frequency CV | approx tracking | 1 V/octave | depth about 3/4 clockwise | 1969 |
| Tap | notches per 2 poles difference | 1 notches | — | 1969 |
| Tap | default tap spacing | 16 poles | — | 1969 |
| Tap | default crossfade notches | 8 notches | — | 1969 |
| group delay | peak | 0.5 s | Q 16, 98 poles, 1 kHz | 1969 |
| group delay | peak | 1.25 s | Q 16, 98 poles, 400 Hz | 1970 |
| config drive | values per tap list | 2 to 8 values | — | 1969 |
| config drive | stage value | 0 to 80 stages | — | 1969 |
| config drive | change applies after | 1 s | — | 1969 |
| Feedback | long ring threshold | 75 % | — | 1969 |
Properties 11
| Subject | Property | Value | Source |
|---|---|---|---|
| allpass sections | cuts frequencies | no | 1969 |
| module | self-oscillation | no | 1969 |
| Feedback loop | limiter | yes | 1969 |
| CV inputs | polarity | bipolar | 1969 |
| CV inputs | audio rate | yes | 1969 |
| CV inputs | combination | added to knob/slider | 1969 |
| Tap CV, Feedback CV | attenuator | none (direct) | 1969 |
| Frequency CV | 1V/oct calibrated | no | 1969 |
| module | platform | Electrosmith Patch SM | 1969 |
| Split | kept at power off | yes | 1969 |
| Tap LEDs | indicate | crossfades between taps | 1969 |
Behavior 21
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| In R | unpatched | In L feeds both | — | 1969 |
| attenuverter | at noon | no CV | — | 1969 |
| attenuverter | left of noon | inverts CV | — | 1969 |
| Tap | on marked tap | one tap, flat level | — | 1969 |
| Tap | between two taps | both heard, notches | — | 1969 |
| Tap LED | marked tap | on | — | 1969 |
| Tap LED | between taps | off | — | 1969 |
| Tap | in hold zone | slider does nothing | — | 1969 |
| Split off | stereo input | each channel through both sections | Split off | 1969 |
| Split on | engaged | each side processes own input | Split on | 1969 |
| Split on | engaged | poles per section double | Split on | 1969 |
| Split on | engaged | feedback stays per channel | Split on | 1969 |
| Split on | engaged | SPLIT legend lights | Split on | 1969 |
| Feedback | high feedback | limiter holds loop | — | 1969 |
| Feedback | above 75% | ring lasts seconds | — | 1969 |
| Resonance | low Q | bass delayed, treble on time | — | 1969 |
| Resonance | high Q | narrow band at FREQ rings | — | 1969 |
| config drive | line has error | line ignored, LEDs flash | — | 1969 |
| firmware | error stops firmware | all LEDs flash, sound stops | — | 1969 |
| bypass | taps bottom, feedback 0 | small phase shift remains | — | 1969 |
| module | power on | LED start animation | — | 1969 |
Functions 2
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Chorus / Flanger / Phaser | block | patchable | 98-pole allpass sections; documented phaser | 1969 |
| Stereo Inputs / Outputs | jack | patchable | jacks In L/R, Out L/R stereo | 1969 |
Power
| +12 V | 108 mA |
|---|---|
| −12 V | 70 mA |
| +5 V | 0 mA |
| Width | 12 HP |
| Depth | 30 mm |
Other Chorus / Flanger / Phaser modules
Sources 2
- [1969]
- [1970]