instruo/dapf
Instruō dåpf Chorus / Flanger / Phaser · Attenuverter / Offset
4 HP chorus / flanger / phaser and attenuverter / offset by Instruō: 5 inputs, 2 outputs, 5 controls, 2 modes.
Instruō · dåpf User Manual (PDF) ↗
Chorus / Flanger / Phaser · 1V/Oct Pitch Tracking · Attenuverter / Offset · Stereo Inputs / Outputs
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Channel 1 Input 896 | channel 1 all-pass input audio | — | normalled from Channel 2 Input → Channel 1 |
| Channel 1 Phase CV Input 896 | phase CV cv | bipolar | → Channel 1 Phase Slider attenuated by Channel 1 Phase CV Attenuverter |
| Channel 2 Input 896 | channel 2 all-pass input audio | — | normalled from Channel 1 Output → Channel 2, Channel 1 |
| Channel 2 Phase CV Input 896 | phase CV cv | bipolar | → Channel 2 Phase Slider attenuated by Channel 2 Phase CV Attenuverter |
| 1V/Oct Input 896 | global 1V/Oct tracking pitch, cv | bipolar scaling v oct | → Channel 1, Channel 2 |
The documents don't state: voltage, impedance (all inputs); coupling (Channel 1 Input, Channel 2 Input).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Channel 1 Output 896 | channel 1 filtered output audio | — | from Channel 1 |
| Channel 2 Output 896 | channel 2 filtered output audio | — | from Channel 2 |
The documents don't state: voltage, coupling, impedance (all outputs).
Controls 5
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Pole Toggle 896 | channel 1 slope switch | Channel 1 |
|
| Channel 1 Phase Slider 896 | centre frequency / phase fader | Channel 1 | — |
| Channel 1 Phase CV Attenuverter 896 | phase CV depth/polarity knob · bipolar | Channel 1 Phase CV Input | — |
| Channel 2 Phase Slider 896 | centre frequency / phase fader | Channel 2 | — |
| Channel 2 Phase CV Attenuverter 896 | phase CV depth/polarity knob · bipolar | Channel 2 Phase CV Input | — |
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel 1 | all-pass filter | Phaser / all-pass network | Channel 1 Input, Channel 1 Phase CV Input, 1V/Oct Input | Pole Toggle, Channel 1 Phase Slider, Channel 1 Phase CV Attenuverter | Channel 1 Output | 896 |
| Channel 2 | all-pass filter | Phaser / all-pass network | Channel 2 Input, Channel 2 Phase CV Input, 1V/Oct Input | Channel 2 Phase Slider, Channel 2 Phase CV Attenuverter | Channel 2 Output | 896 |
Modes 2
Specs 9
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Channel 1 | slope | -6 dB/oct | Pole Toggle left | 896 |
| Channel 1 | slope | -12 dB/oct | Pole Toggle right | 896 |
| Channel 1 Phase Slider | phase shift range | 180 degrees | 1-Pole | 896 |
| Channel 1 Phase Slider | phase shift range | 360 degrees | 2-Pole | 896 |
| Channel 2 Phase Slider | phase shift range | 360 degrees | — | 896 |
| module | width | 4 HP | — | 896 |
| module | depth | 30 mm | — | 896 |
| module | +12V current | 60 mA | — | 896 |
| module | -12V current | 60 mA | — | 896 |
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| all-pass filters | circuit | analogue | 896 |
| all-pass filters | count | 2 | 896 |
| Phase CV Input | combination | summed with Phase Slider | 896 |
| 1V/Oct Input | combination | summed with sliders, CV | 896 |
| 1V/Oct Input | scope | both channels | 896 |
| Output Indicator | shows | channel 2 output amplitude | 896 |
| module | power protection | reverse polarity | 896 |
Behavior 5
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Channel 1 Output | unpatched | channel 1 feeds Channel 2 Output | — | 896 |
| Channel 2 Input | Channel 1 Input unpatched | normals to both channels | — | 896 |
| Channel 2 Output | Ch1 Input and Output unpatched | mono sum of both filters | — | 896 |
| Channel 2 Input | hot input level | attenuate to avoid clipping | — | 896 |
| Phase CV Input | bipolar CV, slider low | negative voltage clips | — | 896 |
Functions 4
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Chorus / Flanger / Phaser | block | patchable | two all-pass filters: phase-shifting | 896 |
| 1V/Oct Pitch Tracking | jack | patchable | jack 1V/Oct Input: global tracking | 896 |
| Attenuverter / Offset | control | patchable | Phase CV Attenuverters: depth and polarity | 896 |
| Stereo Inputs / Outputs | documented use | patchable | documented: mono-to-stereo, stereo-to-stereo processing | 896 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 60 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 30 mm |
Other Chorus / Flanger / Phaser modules
Sources 2
-
[896]
Instruō dåpf User Manual ↗manual · primary⚠ verified 2026-05-24 · the manufacturer changed this document since
- [897]