doepfer/a-137-2
Doepfer A-137-2 Chorus / Flanger / Phaser
14 HP chorus / flanger / phaser by Doepfer: 5 inputs, 1 output, 10 controls.
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio In 513 | audio input audio | — | → Shift circuit 1, Shift circuit 2, Shift circuit 3, Shift circuit 4, Summing attenuated by Audio In Level |
| CV Shift In 1 513 | shift control voltage cv | — | → Shift circuit 1 attenuated by CV Shift 1 |
| CV Shift In 2 513 | shift control voltage cv | — | → Shift circuit 2 attenuated by CV Shift 2 |
| CV Shift In 3 513 | shift control voltage cv | — | → Shift circuit 3 attenuated by CV Shift 3 |
| CV Shift In 4 513 | shift control voltage cv | — | → Shift circuit 4 attenuated by CV Shift 4 |
The documents don't state: voltage, polarity, scaling, coupling, audio rate, impedance (all inputs).
Outputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Out 513 inferred from the documents | original plus shifted sum audio | — | from Summing |
The documents don't state: voltage, polarity, coupling, impedance (Out).
Controls 10
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Audio In Level 513 | input level attenuator knob | Audio In | — |
| Manual Shift 1 513 | manual shift control knob | Shift circuit 1 | — |
| CV Shift 1 513 | shift CV attenuator knob | CV Shift In 1, Shift circuit 1 | — |
| Manual Shift 2 513 | manual shift control knob | Shift circuit 2 | — |
| CV Shift 2 513 | shift CV attenuator knob | CV Shift In 2, Shift circuit 2 | — |
| Manual Shift 3 513 | manual shift control knob | Shift circuit 3 | — |
| CV Shift 3 513 | shift CV attenuator knob | CV Shift In 3, Shift circuit 3 | — |
| Manual Shift 4 513 | manual shift control knob | Shift circuit 4 | — |
| CV Shift 4 513 | shift CV attenuator knob | CV Shift In 4, Shift circuit 4 | — |
| Summing jumpers 512 | summing on/off per signal jumper | Summing |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Shift circuit 1 | comparator phase shifter | Waveshaper / wavefolder | Audio In, CV Shift In 1 | Manual Shift 1, CV Shift 1 | — | 513 |
| Shift circuit 2 | comparator phase shifter | Waveshaper / wavefolder | Audio In, CV Shift In 2 | Manual Shift 2, CV Shift 2 | — | 513 |
| Shift circuit 3 | comparator phase shifter | Waveshaper / wavefolder | Audio In, CV Shift In 3 | Manual Shift 3, CV Shift 3 | — | 513 |
| Shift circuit 4 | comparator phase shifter | Waveshaper / wavefolder | Audio In, CV Shift In 4 | Manual Shift 4, CV Shift 4 | — | 513 |
| Summing | summing of five signals | Mixer | Audio In | Summing jumpers, Audio In Level | Out | 513 |
Specs 6
Properties 6
| Subject | Property | Value | Source |
|---|---|---|---|
| Shift circuit | method | comparator plus input sum | 513 |
| Shift circuit | comparator output | variable-width rectangle | 513 |
| Out | character | similar to five VCOs | 513 |
| internal pin outputs | signals | 4 sawtooth, 4 rectangle | 512 |
| Summing jumpers | replaceable by | external toggle switches | 513 |
| breakout module | status | planned, not released | 513 |
Behavior 4
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Shift circuit | input is rectangle/pulse | phase shift does not work | — | 513 |
| Shift circuit | input sawtooth, triangle, sine | phase-shifted copy produced | — | 513 |
| Audio In Level | set for correct level relation | proper summation of signals | — | 513 |
| Summing jumpers | jumper removed | that signal excluded from sum | — | 512 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Chorus / Flanger / Phaser | block | patchable | Shift circuit: CV-modulated phase-shifted copies | 513 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 20 mA |
| +5 V | — |
| Width | 14 HP |
| Depth | 50 mm |
Other Chorus / Flanger / Phaser modules
Sources 2
- [512]
- [513]