mutable-instruments/frames
Mutable Instruments Frames Step Sequencer · VCA
18 HP step sequencer and VCA by Mutable Instruments: 6 inputs, 6 outputs, 10 controls, 5 modes.
Mutable Instruments · Frames Manual (full) ↗
VCA · Mixer · Exponential / Linear VCA Response · Stereo Panning · Crossfader · Step Sequencer
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| ALL 920 | global input audio, cv | coupling dc impedance 100000 Ω | normalled from +10V → VCA 1, VCA 2, VCA 3, VCA 4 selected by +10V OFFSET = pushed |
| 1 (in) 920 | VCA 1 input audio, cv | coupling dc impedance 100000 Ω | normalled from ALL → VCA 1 |
| 2 (in) 920 | VCA 2 input audio, cv | coupling dc impedance 100000 Ω | normalled from ALL → VCA 2 |
| 3 (in) 920 | VCA 3 input audio, cv | coupling dc impedance 100000 Ω | normalled from ALL → VCA 3 |
| 4 (in) 920 | VCA 4 input audio, cv | coupling dc impedance 100000 Ω | normalled from ALL → VCA 4 |
| FRAME CV 920 | animation position CV cv | impedance 100000 Ω | → FRAME, keyframer attenuated by MODULATION In 1 mode
|
The documents don't state: voltage, polarity, scaling, audio rate (all inputs); coupling (FRAME CV).
Outputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| 1 (out) 920 | VCA 1 output audio, cv | coupling dc | from VCA 1 |
| 2 (out) 920 | VCA 2 output audio, cv | coupling dc | from VCA 2 |
| 3 (out) 920 | VCA 3 output audio, cv | coupling dc | from VCA 3 |
| 4 (out) 920 | VCA 4 output audio, cv | coupling dc | from VCA 4 |
| MIX 920 | global mix output audio, cv | — | from mixer |
| FR.STEP 920 | keyframe crossing pulse trigger | ≤ 5 V pulse 1 ms | from keyframer |
The documents don't state: voltage, polarity (1 (out), 2 (out), 3 (out), 4 (out), MIX); scaling, audio rate (all outputs); coupling (MIX).
Controls 10
| Control | What it does | Affects | Positions |
|---|---|---|---|
| FRAME 920 | animation position knob | keyframer | In 1 mode
|
| ADD 920 | create keyframe button | keyframer | — |
| DEL 920 | remove keyframe button | keyframer | — |
| 1 (gain) 920 | channel 1 keyframe gain knob | VCA 1 | In 2 modes
|
| 2 (gain) 920 | channel 2 keyframe gain knob | VCA 2 | In 2 modes
|
| 3 (gain) 920 | channel 3 keyframe gain knob | VCA 3 | In 2 modes
|
| 4 (gain) 920 | channel 4 keyframe gain knob | VCA 4 | In 2 modes
|
| +10V OFFSET 920 | +10V into ALL switch | ALL |
|
| MODULATION 920 | FRAME CV attenuverter knob · bipolar | FRAME CV | — |
| reference voltage jumper 920 | CV range selection jumper | ALL |
|
Blocks 7
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| VCA 1 | VCA | VCA | 1 (in) | 1 (gain) | 1 (out) | 920 |
| VCA 2 | VCA | VCA | 2 (in) | 2 (gain) | 2 (out) | 920 |
| VCA 3 | VCA | VCA | 3 (in) | 3 (gain) | 3 (out) | 920 |
| VCA 4 | VCA | VCA | 4 (in) | 4 (gain) | 4 (out) | 920 |
| keyframer | keyframer | — | FRAME CV | FRAME, ADD, DEL, MODULATION | FR.STEP | 920 |
| mixer | 4-channel mixer | Mixer | 1 (out), 2 (out), 3 (out), 4 (out) | — | MIX | 921 |
| precision voltage reference | offset voltage | Attenuverter / offset | — | +10V OFFSET, reference voltage jumper | ALL | 921 |
Modes 5
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| keyframe edit | default | — | power-up default | 920 |
| interpolation curve edit | channel settings | — | hold ADD 1 s | 920 |
| response curve edit | channel settings | — | hold DEL 1 s | 920 |
| sequencer | playback mode | — | press ADD 5 times at keyframe | 920 |
| firmware update | firmware update | — | power on holding ADD | 920 |
Specs 14
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| keyframer | max keyframes | 20 keyframes | — | 921 |
| interpolation | curves available | 6 curves | — | 920 |
| VCA gain control | resolution | 12 bit | — | 921 |
| MIX | gain | -6 dB | — | 921 |
| ALL | input impedance | 25000 ohms | some normalling configurations | 921 |
| modulation | fastest rate | 15 kHz | — | 921 |
| reference voltage | CV range | 0 to 10 V | default jumper | 920 |
| reference voltage | CV range | 0 to 5 V | jumper moved | 920 |
| ADD/DEL hold | settings entry | 1 s | — | 920 |
| ADD/DEL hold | save / clear | 5 s | — | 920 |
| module | width | 18 HP | — | 920 |
| module | depth | 25 mm | — | 921 |
| module | +12V current | 90 mA | — | 920 |
| module | -12V current | 30 mA | — | 920 |
Properties 9
| Subject | Property | Value | Source |
|---|---|---|---|
| VCAs | IC | V2164 | 921 |
| VCAs | gain control | digital | 921 |
| inputs and outputs | coupling | DC | 921 |
| interpolation curves | options | step, linear, accelerating, decelerating | 920 |
| interpolation curves | more options | raised cosine, bouncing | 920 |
| response curve | range | linear to logarithmic | 921 |
| FRAME knob | illumination | keyframe colors | 920 |
| KEYFRAME LED | indicates | keyframe at position | 920 |
| configuration | persistence | restored at power-up | 920 |
Behavior 11
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| inputs 1-4 | unpatched | receive ALL signal | — | 920 |
| ALL | unpatched, offset off | VCAs receive no signal | — | 920 |
| ALL | unpatched, +10V OFFSET pushed | receives constant +10V | — | 920 |
| outputs 1-4 | jack inserted | removed from MIX | — | 920 |
| gain knobs | no keyframe at position | no effect; gains interpolated | — | 920 |
| DEL | no keyframe at position | nothing happens | — | 920 |
| FR.STEP | animation crosses keyframe | 1ms +5V pulse | — | 920 |
| FRAME | sequencer mode | no longer controls frame | sequencer | 920 |
| FRAME CV | pulse in sequencer mode | advances to next frame | sequencer | 920 |
| DEL 5 s clear | always | saved configuration kept | — | 920 |
| power-up | configuration saved | configuration restored | — | 920 |
Functions 6
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| VCA | block | patchable | quad VCA core | 920 |
| Mixer | block | patchable | MIX output sums unpatched channels | 921 |
| Exponential / Linear VCA Response | mode | patchable | per-channel response linear to exponential | 920 |
| Stereo Panning | documented use | patchable | documented: panning via ALL to outputs 1/2 | 920 |
| Crossfader | documented use | patchable | documented: waveform mixing / blending animation | 920 |
| Step Sequencer | mode | patchable | sequencer mode: clocked keyframe stepping | 920 |
Power
| +12 V | 90 mA |
|---|---|
| −12 V | 30 mA |
| +5 V | — |
| Width | 18 HP |
| Depth | 25 mm |
Other Step Sequencer modules
Sources 2
- [920]
- [921]