mutable-instruments/edges
Mutable Instruments Edges Digital / Wavetable Oscillator · Noise Source
20 HP digital / wavetable oscillator and noise source by Mutable Instruments: 12 inputs, 5 outputs, 15 controls, 6 modes.
Mutable Instruments · Edges Manual (full) ↗
Digital / Wavetable Oscillator · 1V/Oct Pitch Tracking · Pulse Width Modulation · Oscillator Sync · Ring Modulator · Noise Source · Mixer · Step Sequencer · Quantizer · Polyphonic Operation
Inputs 12
| Jack | What it does | Range | Connections |
|---|---|---|---|
| GATE 1 1050 | channel gate gate, clock | threshold 0.7 V impedance 100000 Ω | → Channel 1 In 1 mode
|
| V/OCT 1 1050 | channel frequency input pitch | scaling v oct impedance 100000 Ω | → Channel 1, semitone quantizer |
| MOD 1 1050 | frequency modulation input cv | impedance 100000 Ω | → Channel 1 In 1 mode
|
| GATE 2 1050 | channel gate gate, clock | threshold 0.7 V impedance 100000 Ω | normalled from GATE 1 → Channel 2 In 1 mode
|
| V/OCT 2 1050 | channel frequency input pitch | scaling v oct impedance 100000 Ω | normalled from V/OCT 1 → Channel 2, semitone quantizer |
| MOD 2 1050 | frequency modulation input cv | impedance 100000 Ω | → Channel 2 In 1 mode
|
| GATE 3 1050 | channel gate gate, clock | threshold 0.7 V impedance 100000 Ω | normalled from GATE 2 → Channel 3 In 1 mode
|
| V/OCT 3 1050 | channel frequency input pitch | scaling v oct impedance 100000 Ω | normalled from V/OCT 2 → Channel 3, semitone quantizer |
| MOD 3 1050 | frequency modulation input cv | impedance 100000 Ω | → Channel 3 In 1 mode
|
| GATE 4 1050 | channel gate gate, clock | threshold 0.7 V impedance 100000 Ω | normalled from GATE 3 → Channel 4 In 1 mode
|
| V/OCT 4 1050 | channel frequency input pitch | scaling v oct impedance 100000 Ω | normalled from V/OCT 3 → Channel 4, semitone quantizer |
| MOD 4 1050 | frequency modulation input cv | impedance 100000 Ω | → Channel 4 |
The documents don't state: voltage (all inputs); polarity, scaling, coupling, audio rate (MOD 1, MOD 2, MOD 3, MOD 4).
Outputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 1 1050 | channel individual output audio | — | from Channel 1 |
| OUT 2 1050 | channel individual output audio | — | from Channel 2 |
| OUT 3 1050 | channel individual output audio | — | from Channel 3 |
| OUT 4 1050 | channel individual output audio | — | from Channel 4 |
| MIX 1050 | mixer output audio | — | from mixer |
The documents don't state: voltage, coupling (all outputs).
Controls 15
| Control | What it does | Affects | Positions |
|---|---|---|---|
| FREQ 1 1050 | channel frequency knob | Channel 1 | In 1 mode
|
| WAVEFORM SELECT 1 1050 | cycle channel waveshape button | Channel 1 |
In 2 modes
|
| volume 1 1050 | channel mixer volume knob | mixer | — |
| FREQ 2 1050 | channel frequency knob | Channel 2 | In 1 mode
|
| WAVEFORM SELECT 2 1050 | cycle channel waveshape button | Channel 2 |
In 2 modes
|
| volume 2 1050 | channel mixer volume knob | mixer | — |
| FREQ 3 1050 | channel frequency knob | Channel 3 | In 1 mode
|
| WAVEFORM SELECT 3 1050 | cycle channel waveshape button | Channel 3 |
In 2 modes
|
| volume 3 1050 | channel mixer volume knob | mixer | — |
| FREQ 4 1050 | channel frequency knob | Channel 4 | In 1 mode
|
| WAVEFORM SELECT 4 1050 | cycle channel waveshape button | Channel 4 |
In 2 modes
|
| volume 4 1050 | channel mixer volume knob | mixer | — |
| XMOD 1 1050 | cross-modulation enable switch | Channel 1, Channel 2 |
|
| XMOD 2 1050 | cross-modulation enable switch | Channel 1, Channel 2 |
|
| XMOD 3 1050 | cross-modulation enable switch | Channel 1, Channel 3 |
|
Blocks 8
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel 1 | square wave channel | Oscillator | GATE 1, V/OCT 1, MOD 1 | FREQ 1, WAVEFORM SELECT 1, volume 1 | OUT 1 | 1050 |
| Channel 2 | square wave channel | Oscillator | GATE 2, V/OCT 2, MOD 2 | FREQ 2, WAVEFORM SELECT 2, volume 2 | OUT 2 | 1050 |
| Channel 3 | square wave channel | Oscillator | GATE 3, V/OCT 3, MOD 3 | FREQ 3, WAVEFORM SELECT 3, volume 3 | OUT 3 | 1050 |
| Channel 4 | noise/triangle channel | Oscillator, Noise source | GATE 4, V/OCT 4, MOD 4 | FREQ 4, WAVEFORM SELECT 4, volume 4 | OUT 4 | 1050 |
| mixer | built-in mixer | Mixer | Channel 1, Channel 2, Channel 3, Channel 4 | volume 1, volume 2, volume 3, volume 4 | MIX | 1050 |
| polyphonic sequencer | per-channel step sequencer | Step sequencer | GATE 1, GATE 2, GATE 3, GATE 4 | — | — | 1050 |
| semitone quantizer | semitone quantizer | Quantizer | V/OCT 1, V/OCT 2, V/OCT 3, V/OCT 4 | — | — | 1051 |
| XMOD | digital cross-modulation | Ring modulator | — | XMOD 1, XMOD 2, XMOD 3 | — | 1050 |
Modes 6
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| settings | channel options menu | — | hold WAVEFORM SELECT | 1050 |
| semitone quantization | per-channel option | — | settings mode, press switch 1 | 1050 |
| sequencer | per-channel option | — | settings mode, press switch 2 | 1050 |
| sequence recording | recording | — | settings mode, press switch 3 | 1050 |
| calibration | calibration | — | settings mode, press switch 4 | 1050 |
| CV controlled pulse width | waveshape | — | WAVEFORM SELECT cycling (ch 1-3) | 1050 |
Specs 19
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| FREQ | range | 6 octaves | — | 1050 |
| Channels 1-3 | pulse duty cycle | 50 to 95 % | — | 1050 |
| Channels 1-3 | timer clock | 4 MHz | — | 1051 |
| Channels 1-3 | resolution | 1 bit | — | 1051 |
| Channel 4 | sample rate | 48 kHz | — | 1051 |
| Channel 4 | DAC resolution | 12 bit | — | 1051 |
| NES triangle | loudness levels | 16 levels | — | 1050 |
| CV acquisition | rate | 4 kHz | — | 1051 |
| CV acquisition | resolution | 12 bit | — | 1051 |
| sequencer | max sequence length | 8 steps | — | 1050 |
| calibration | low reference CV (C2) | 1 V | — | 1050 |
| calibration | high reference CV (C4) | 3 V | — | 1050 |
| module | width | 20 HP | — | 1050 |
| module | depth | 25 mm | — | 1051 |
| module | ±12V current | 25 mA | original manual, 2x8 version | 1050 |
| module | +5V current | 45 mA | original manual, 2x8 version | 1050 |
| module | +12V current | 70 mA | product page | 1051 |
| module | -12V current | 20 mA | product page | 1051 |
| processor | clock | 32 MHz | — | 1051 |
Properties 12
| Subject | Property | Value | Source |
|---|---|---|---|
| Channels 1-3 | waveform generation | digital logic timers | 1050 |
| Channels 1-3 | aliasing | free | 1050 |
| Channel 4 | DAC reconstruction filter | none | 1051 |
| GATE inputs | normalling | cascaded across channels | 1050 |
| V/OCT inputs | normalling | cascaded across channels | 1050 |
| MOD inputs | normalling | not normalled | 1050 |
| MOD input | combination with V/OCT | summed | 1050 |
| OUT jacks | level | always full level | 1050 |
| Edges | calibration | digital | 1050 |
| v2 revision | FM input acquisition | separate from V/O | 1051 |
| v2 revision | FREQ pot detent | none | 1051 |
| LED 1..4 | indicates | gate input status | 1050 |
Behavior 14
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| GATE | sequencer off | acts as binary VCA | — | 1050 |
| GATE | signal at 0V | channel off | — | 1050 |
| GATE | signal exceeds 0.7V | channel on | — | 1050 |
| GATE | sequencer active | acts as clock input | sequencer | 1050 |
| channel | sequencer active | always on | sequencer | 1050 |
| GATE/V/OCT | own jack unpatched | uses previous channel's jack | — | 1050 |
| OUT | jack plugged | channel removed from mix | — | 1050 |
| volume knob | always | individual outputs unaffected | — | 1050 |
| MOD | PWM waveshape selected | becomes PWM CV | CV controlled pulse width | 1050 |
| Channel 4 frequency input | PWM option, early revision | doubles as PWM control | — | 1050 |
| sequence recording | active step pressed | recording stops | sequence recording | 1050 |
| sequence recording | next switch pressed | advances to next step | sequence recording | 1050 |
| calibration | LEDs **oo | play C2 (1V) | calibration | 1050 |
| calibration | LEDs **** | play C4 (3V) | calibration | 1050 |
Functions 10
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Digital / Wavetable Oscillator | block | patchable | four digital oscillator channels | 1050 |
| 1V/Oct Pitch Tracking | jack | patchable | jack V/OCT: channel frequency | 1050 |
| Pulse Width Modulation | jack | patchable | MOD repurposed as PWM CV (ch 1-3) | 1051 |
| Oscillator Sync | control | internal | XMOD: Ch1 to Ch2 hard sync | 1050 |
| Ring Modulator | control | internal | XMOD: Ch1 x Ch2 / Ch3 ring mod | 1050 |
| Noise Source | block | patchable | Channel 4: LSFR / S&H noise on OUT 4 | 1050 |
| Mixer | block | patchable | built-in mixer -> MIX | 1050 |
| Step Sequencer | block | internal | per-channel 8-step sequencer | 1050 |
| Quantizer | mode | internal | optional semitone quantizer per channel | 1050 |
| Polyphonic Operation | block | patchable | 4 channels with own gate and V/OCT | 1050 |
Power
| +12 V | 70 mA |
|---|---|
| −12 V | 20 mA |
| +5 V | 45 mA |
| Width | 20 HP |
| Depth | 25 mm |
Other Digital / Wavetable Oscillator modules
Sources 2
- [1050]
- [1051]