Intellijel
Lineup 32 / 79 in corpus
Lineup transcribed from https://intellijel.com/shop/eurorack/ ↗, last checked 2026-05-13.
-
Atlantix
Standalone two-oscillator synth voice with internally-patched synthesis blocks and 32 individual patch points, encompassing VCO A, VCO B, MIXER, VCF, ENV/VCA, and MODS sections.
-
Aux Mix 1U
A 3-channel stereo mixer in Intellijel 1U format with a stereo auxiliary send bus, AC-coupled with logarithmic attenuators, soft-clipping output stages, and rear-panel 3-pin connectors for inter-module bus chaining.
-
Bifold
A dual-channel analog wavefolder combining a Buchla-inspired parallel 'deadband' folder (P channel) and a Serge-inspired serial folder (S channel), linked by a voltage-controlled crossfader with extensive CV, feedback, and routing options.
-
Buff Mult 1U
Dual 1-in to 4-out buffered signal multiplier in the Intellijel 1U format. The two independent sections can be used separately or the top input can be normalled to the bottom to create a single 1×8 buffered multiple.
-
Dual VCA 1U
Two high quality, DC coupled, linear VCAs in a compact 1U package. Can be used independently or in tandem via signal normalling for audio and CV amplitude control.
-
FSR 1U
Force Sensing CV and Gate Generating Pad — generates a variable CV proportional to pressure applied to the FSR pad, along with a gate signal active while the pad is touched.
-
MEMS Mic
2HP MEMS omni microphone module with CV-controllable output level, highpass filter switch, and activity/overload LED indicators.
-
Metropolix
Multitrack, performance-oriented pitch, gate and mod sequencer. Two tracks plus 8 mod lanes, 8-stage sliders, pulse count and gate type switches, loopy mode, 64 presets, 3 AUX inputs, 2 CTRL knobs, and extensive CV routing.
-
MIDI 1U
14HP 1U class-compliant MIDI-to-CV interface. Receives MIDI from an attached external MIDI input connector (7U case, Palette case, or MIDI IN Jacks 1U module). Works in Single Mode (one monophonic synth: PITCH, VEL, MOD, CC, GATE, TRIG, CLK, RST outputs) or Dual Mode (two monophonic synths sharing the same jacks). Expandable with up to four CVx 1U modules for polyphonic and drum operation.
-
Mixup
A six-input (plus two via chaining) chainable stereo audio utility mixer with AC-coupled circuitry and logarithmic attenuators, mixing mono and stereo sources to a stereo output.
-
Morgasmatron
Analog self-oscillating dual six-mode filter with crossfader, serial/parallel routing, ProCo Rat-modelled overdrive on Filter A, Q-Drive resonance saturation, phase inversion on Filter B, and ring modulation capability via XFADE with phase-inverted Filter B.
-
Multigrain
Live Stereo Morphing Granular Sampler with instant access to eight Sounds, played back through a granular engine with morphable scenes and a reverb effect called Blur.
-
Outs
Balanced stereo line and headphone output module. Converts modular-level signals to +4dBu balanced professional line level (TRS 1/4") and -10dBV unbalanced standard. Includes a low-noise headphone amplifier with independent level control on a 1/4" stereo jack. Left input is normalled to right input for mono-to-stereo operation.
-
Passive LPG 1U
Simple, DC-coupled, vactrol-based, 1-pole passive low pass gate controlled by an external CV input. Passive module requiring no power.
-
Plonk
Physical modelling percussion synthesizer developed in collaboration with Applied Acoustics Systems. Breaks sound into an exciter (mallet or noise) and a resonator (string, beam, marimba, drumhead, membrane, or plate) to synthesize percussive and pitched sounds. Two-voice polyphonic, 128 preset slots, CV-controllable with four modulation inputs.
-
Polaris
4-stage cascaded OTA filter with dedicated LP, BP, and HP outputs plus a configurable MULTI output with 27 selectable filter modes including lowpass, bandpass, highpass, notch, allpass, and phaser. Features input drive with soft clipping distortion and asymmetric distortion on the MULTI output.
-
Quad VCA
Four-channel variable-response VCA with cascaded CV inputs and cascaded mix outputs. Features per-channel level control, CV attenuators, linear-to-exponential response sweep, boost switch, and normalled mixing.
-
Quadratt 1U
Four channel active/buffered attenuverter and summing mixer. Each channel has a knob functioning as a unipolar attenuator or bipolar attenuverter, with inputs normalled to +5V DC and outputs normalled into the adjacent channel for submixing.
-
Quadrax
4-channel CV-controllable function generator with AD, AHR, cycling, burst, and morphing bipolar LFO modes; channels are linkable and have a fully programmable CV matrix with attenuversion.
-
Rainmaker
A high-quality stereo rhythmic delay and comb resonator Eurorack module featuring a 16-tap rhythm delay line (each tap with its own multimode filter and granular pitch shifter) and a 64-tap tunable comb resonator, with extensive voltage control, 128 preset slots, and FPGA-based 96kHz/32-bit internal processing.
-
Scales
Scales is an 8hp dual-channel note quantizer and step sequencer. It quantizes input voltages to notes in a user-defined scale, with two independent outputs, shift/interval control, and a 128-step SH-101-style step sequencer with storage for up to 35 fully programmable patterns.
-
Sealegs
Stereo character delay with reverb that models three delay circuit types (tape, bucket brigade, and digital), featuring per-model color controls, built-in modulation with multiple waveshapes, low/high-pass filters in the feedback loop, and a configurable signal flow.
-
Shapeshifter
Dual digital voltage-controlled wavetable oscillator with 128 wave banks (1024 waves total), audio-rate FM/PM, nonlinear oscillator combination modes, chord mode (8 detuned voices), analog wavefolder, 64-band vocoder, echo/delay, percussion mode, and 100-slot preset sequencing/morphing system in 26HP Eurorack format.
-
Steppy
4-track programmable gate sequencer with eight internal memory slots, external clocking, various playback options, and a performance-first design aesthetic.
-
Steppy 1U
A 4-track programmable gate sequencer with eight internal memory slots, external clocking, per-track parameters, and a performance-first design in a 1U tile format.
-
Stereo I/O 1U
An all-in-one audio input/output module bridging a Eurorack system and line-level devices, featuring balanced stereo line output with volume control, balanced stereo line input with gain switches, a headphone output with independent level control and source selection, and a cue output for monitoring or summing with the main output.
-
SVF 1U
Multimode state-variable filter in Intellijel 1U format with dedicated LP and HP outputs, switchable BP/Notch output, optional +6dB input boost and asymmetric clipping, 1V/Oct PITCH CV input, FM CV input with attenuverter, and self-oscillation capable of generating sine waves from 2Hz to 20kHz.
-
Swells
Multi-model stereo reverb with nine reverb models and a built-in SWELL Generator (multi-mode envelope follower), featuring comprehensive per-model controls, LO-FI modifier, FREEZE/REVERSE/BURST momentary FX, and nine CV inputs with attenuverters.
-
Tangrams
Dual analog ADSR envelope generators with integrated VCAs and a voltage-controlled pulser circuit that links triggering of the two envelopes, allowing delayed one-shots, cycling organic envelopes, and complex gate patterns.
-
Tête
Expander for the Intellijel Tetrapad that adds an OLED display plus extra CV/gate I/O and unlocks advanced operating modes (Voltages, Notes, Combo) for sequencing, quantizing, and performance recording.
-
Tetrapad
A versatile, multi-dimensional, touch-sensitive control surface for Eurorack with four pressure and position sensitive pads, eight flexible outputs, and multiple operating modes for generating CV, gate, and trigger signals.
-
Unity Mixer
Two sections where three input signals can be summed into one output, with top normalled to bottom for 6:1 mixing. 2HP form factor, buffered inputs and outputs, phase correct, unity gain.
- Amps ↗
- Atlx ↗
- Att 1U ↗
- Audio I/O (2023) ↗
- Buff Mult ↗
- CVx 1U ↗
- Digiverb 1U ↗
- Dixie²+ ↗
- Duatt 1U ↗
- Flurry ↗
- Gx ↗
- Headphones 1U ↗
- Line In 1U ↗
- Line Out 1U ↗
- MEMS Mic 1U ↗
- Mult ↗
- Mult 1U ↗
- Multi-FX 1U ↗
- Noise Tools 1U ↗
- OR ↗
- Pedal I/O 1U ↗
- Planar² ↗
- Qx ↗
- Ringmod 1U ↗
- Shifty ↗
- Springray² ↗
- Stereo Line In 1U ↗
- Stereo Line Out 1U ↗
- Stereo Mixer 1U ↗
- Stomp ↗
- Switched Mult 1U ↗
- Triplatt ↗
- VCO 1U ↗
- Xfade 1U ↗
- XY I/O 1U ↗
- Zeroscope 1U ↗
- µMIDI ↗
- µVCA ↗
- MIDI Jacks 1U ↗
- Pedal I/O Jacks 1U ↗
- Stereo Line In Jacks 1U ↗
- Stereo Line Out Jacks 1U ↗
- Octalink 1U ↗
- Power Entry ↗
- Power Entry 1U ↗
- USB Extender ↗
- USB Power 1U ↗