intellijel/mixup
Mixup
A six-input (plus two via chaining) chainable stereo audio utility mixer with AC-coupled circuitry and logarithmic attenuators, mixing mono and stereo sources to a stereo output.1034
Capabilities 2
- Chainable Expanderchainable-expander
- Rear-panel CHAIN-IN and CHAIN-OUT 3-pin link connectors allow serial chaining with other Mixup modules, Stereo Mix 1U, Outs, v2 Headphones 1U, and compatible Intellijel cases.1034
- Stereo Mixerstereo-mixer
- Mixes up to eight channels (six front-panel + two via chain) to a stereo output using AC-coupled, logarithmic attenuators.1034
Jacks 10 (7 in / 3 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (7) | |||
| CHAIN-IN | audio | — | Rear-panel 3-pin connector that feeds an external stereo signal directly into the MIX bus, functioning similarly to Input 4; used to chain another Mixup or compatible module.1034 |
| IN 1 | audio | — | Mono audio input routed to both MIX L and MIX R outputs; level set by LEVEL 1 knob, can be muted with MUTE 1 switch.1034 |
| IN 2 | audio | — | Mono audio input routed to both MIX L and MIX R outputs; level set by LEVEL 2 knob, can be muted with MUTE 2 switch.1034 |
| IN 3L | audio | — | Left side of stereo input 3, routed to MIX L; if IN 3R is unpatched, acts as a mono input to both outputs. Shared mute and level with IN 3R.1034 |
| IN 3R | audio | — | Right side of stereo input 3, routed to MIX R. Leave unpatched to use IN 3L as a mono input. Shared mute and level with IN 3L.1034 |
| IN 4L | audio | — | Left side of unity-gain stereo input 4 with no mute or level control; routed directly to MIX L. Acts as mono to both outputs if IN 4R is unpatched.1034 |
| IN 4R | audio | — | Right side of unity-gain stereo input 4 with no mute or level control; routed directly to MIX R. Leave unpatched to use IN 4L as a mono input.1034 |
| Outputs (3) | |||
| CHAIN-OUT | audio | — | Rear-panel 3-pin connector that taps the stereo MIX bus output for chaining to another compatible module such as another Mixup, Stereo Mix 1U, Outs, or v2 Headphones 1U.1034 |
| MIX L | audio | — | Stereo left mix output, summing IN 1, IN 2, IN 3L, IN 4L, and any left-channel audio arriving via the CHAIN-IN connector.1034 |
| MIX R | audio | — | Stereo right mix output, summing IN 1, IN 2, IN 3R (or IN 3L if 3R unpatched), IN 4R (or IN 4L if 4R unpatched), and any right-channel audio arriving via CHAIN-IN.1034 |
Parameters 6
| Name | Type | Range | Behavior |
|---|---|---|---|
| LEVEL 1 | knob | — | Attenuates the IN 1 mono audio level sent to both MIX L and MIX R outputs; uses a logarithmic taper.1034 |
| LEVEL 2 | knob | — | Attenuates the IN 2 mono audio level sent to both MIX L and MIX R outputs; uses a logarithmic taper.1034 |
| LEVEL 3 | knob | — | Jointly attenuates the IN 3L and IN 3R stereo audio level sent to the MIX outputs; uses a logarithmic taper.1034 |
| MUTE 1 | switch | — | When switched to the down position, removes IN 1 from the MIX outputs; AC-coupled to reduce pops on switching.1034 |
| MUTE 2 | switch | — | When switched to the down position, removes IN 2 from the MIX outputs; AC-coupled to reduce pops on switching.1034 |
| MUTE 3 | switch | — | When switched to the down position, removes both IN 3L and IN 3R from the MIX outputs; AC-coupled to reduce pops on switching.1034 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [1034]
- [1035]