intellijel/atlantix
Atlantix
Standalone two-oscillator synth voice with internally-patched synthesis blocks and 32 individual patch points, encompassing VCO A, VCO B, MIXER, VCF, ENV/VCA, and MODS sections.641
Capabilities 5
- Dual VCOdual-vco
- 641
- Envelope Generatorenvelope-generator
- Analog ADSR with three timing ranges (FAST/MED/SLOW), manual gate button, and velocity/level CV input. Normalled to VCO A FM and VCF cutoff.641
- Sample and Holdsample-and-hold
- Analog S&H normalled to white noise source; can be clocked by VCO B square, external clock, or gate. Also supports track-and-hold mode.641
- Vcfvcf
- Discrete cascaded multimode filter with LP2, LP4, BP2, BP4, HP4, and Phaser modes. Self-oscillates to produce a clean sine wave tracking 1V/Oct.641
- Voltage-Controlled Amplifiervca
- 641
Jacks 30 (21 in / 9 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (21) | |||
| AUX 1 IN | mixed | — | External input to MIXER. Normalled to VCO A Triangle or VCO B Square per AUX 1 Source Switch.641 |
| AUX 2 IN | mixed | — | 641 |
| FM 2 IN | mixed | — | Exponential FM input for VCO A. Normalled to envelope output when nothing patched.641 |
| FM A IN | mixed | — | FM (TZFM or exponential) input for VCO A. Normalled to MOD X output. Type selected by TZFM/EXP switch.641 |
| FM B IN | mixed | — | 641 |
| GATE Input | gate | — | 641 |
| IM IN | cv | — | CV input for FM INDEX modulation amount. Normalled to envelope output when nothing patched.641 |
| LEVEL Input | cv | 0V to 5V | 641 |
| PITCH A IN | cv | — | 1V/Oct pitch CV input for VCO A. Controls VCO A frequency.641 |
| PITCH B IN | cv | — | 641 |
| PWM IN | cv | -5V to 5V | 641 |
| Q IN | cv | — | 641 |
| RETRIGGER Input | trigger | — | 641 |
| S&H HOLD input | clock | — | 641 |
| S&H SAMP input | mixed | — | Signal to be sampled or tracked. Normalled to white noise when nothing patched.641 |
| SYNC A IN | audio | — | Sync input for VCO A. Normally sourced from VCO B SAW or GATE depending on SYNC A SOURCE switch.641 |
| SYNC B IN | audio | — | 641 |
| VCA IN | audio | — | 641 |
| VCF FM 1 IN | cv | — | First FM CV input for VCF cutoff frequency. Normalled to MOD Y output.641 |
| VCF FM 2 IN | cv | — | Second FM CV input for VCF cutoff. Normalled to VCO A pitch for filter tracking. Polarity invertible.641 |
| VCF IN | audio | — | 641 |
| Outputs (9) | |||
| ENVELOPE Out | cv | 0V to 5V | 641 |
| INVERSE ENVELOPE Out | cv | -5V to 0V | 641 |
| MIXER output | audio | — | Sum of all MIXER section waveforms. Normalled to VCF input.641 |
| MOD Y OUT | mixed | — | 641 |
| OUT | audio | -5V to 5V | 641 |
| S&H OUT | cv | — | 641 |
| VCF OUT | audio | — | 641 |
| VCO A SINE out | audio | — | 641 |
| VCO B SPIKE out | audio | — | 641 |
Parameters 53
| Name | Type | Range | Behavior |
|---|---|---|---|
| 4P/2P switch | switch | — | 641 |
| A (ATTACK Time) | fader | — | 641 |
| AC/DC switch | switch | — | 641 |
| AUX 1 amount | fader | — | 641 |
| AUX 1 Source Switch | switch | — | 641 |
| AUX 2 amount | fader | — | 641 |
| AUX 2 ROUTING switch | switch | — | MIX position: AUX 2 is mixed pre-VCF with other MIXER signals. VCA position: AUX 2 bypasses the VCF and feeds directly to the VCA.641 |
| AUX 2 Source Switch | switch | — | 641 |
| D (DECAY Time) | fader | — | 641 |
| DRIVE switch | switch | — | SYM (top): symmetric clipping/drive; X (middle): no drive; ASYM (bottom): asymmetric clipping/drive.641 |
| ENV Polarity switch | switch | — | 641 |
| ENV/GATE switch | switch | — | 641 |
| ENVELOPE RATE | switch | — | FAST: A max ~1.5-2s, D/R max ~7-8s. MED: A max ~10-12s, D/R max ~35-40s. SLOW: A max ~19-21s, D/R max ~70-75s.641 |
| FM 2 amount | fader | — | Controls exponential FM depth from FM 2 IN. Top = maximum FM; bottom = no FM.641 |
| FM 2 Polarity switch | switch | — | 641 |
| FREQ | menu_setting | — | 641 |
| HOLD SOURCE switch | switch | — | Selects the normal for S&H HOLD input: GATE (right) = gate signal; S&H (up) = traditional S&H mode from external; VCO B SQUARE (left) = VCO B square wave. Also selects T&H (down) = track-and-hold mode.641 |
| IM slider | fader | — | Attenuates the CV signal at the IM IN jack before it modulates the FM INDEX. At top, maximum modulation; at bottom, no modulation.641 |
| INDEX | fader | — | Sets the base FM INDEX level — the amount that a signal at FM A IN modulates VCO A frequency. At highest position, FM is maximum; at bottom, no FM occurs.641 |
| LP/BP/HP switch | switch | — | Selects between LP (lowpass), BP (bandpass), and HP (highpass) filter types. HP is always 4-pole; LP and BP can be 2-pole or 4-pole via the 4P/2P switch.641 |
| MANUAL GATE | button | — | 641 |
| MOD X POLARITY | switch | — | 641 |
| MOD X Source | knob | — | 8-position rotary: selects from VCO B Sine, Triangle, Saw, Square; S&H; Noise; VCF; VCA. Output normalled to VCO A FM A input.641 |
| MOD X UNIPOLAR | switch | — | 641 |
| MOD Y POLARITY | switch | — | 641 |
| MOD Y Source | knob | — | 8-position rotary: selects from VCO B Sine, Triangle, Saw, Square; S&H; Noise; VCF; MIX. Output normalled to VCF FM A input.641 |
| MOD Y UNIPOLAR | switch | — | 641 |
| NOISE amount | fader | — | 641 |
| NOISE TYPE | switch | — | 641 |
| OCTAVE A | knob | — | 8-position selector that sets the coarse tuning of VCO A. Each clockwise rotation shifts the tuning up by one octave.641 |
| OCTAVE B | knob | — | 641 |
| PHZ/Filter switch | switch | — | 641 |
| PITCH A | knob | — | 641 |
| PITCH B | knob | — | 641 |
| PITCH SOURCE | switch | — | A+B (up): VCO B tracks sum of PITCH A and PITCH B inputs; B (down): VCO B tracks only PITCH B input.641 |
| PULSE amount | fader | — | 641 |
| PULSE POSITION | switch | — | Up = center-triggered pulse; down = edge-triggered pulse. Both are essentially the same waveform but with different phase relationships affecting how they blend or sync with other waveforms.641 |
| PW | fader | 50% – 95% | Sets the pulse width of VCO A PULSE wave. At bottom = 50% duty cycle (square wave); at top = ~95% duty cycle (thin pulse). 100% can be reached with PWM CV, which silences the output.641 |
| PWM slider | fader | — | Attenuates the CV arriving at PWM IN. At top, maximum PWM; at bottom, no modulation.641 |
| PWM Source switch | switch | — | 641 |
| Q | menu_setting | — | 641 |
| R (RELEASE Time) | fader | — | 641 |
| S (SUSTAIN Level) | fader | 0V – 5V | 641 |
| SAW amount | fader | — | 641 |
| SUB amount | fader | — | 641 |
| SUB TYPE | switch | — | SUB -1 (left): square wave 1 octave below VCO A. SUB -2 (right): square wave 2 octaves below VCO A. OR (center): logical OR of SUB -1 and SUB -2, giving a pulse wave 2 octaves below VCO A with 75% pulse width.641 |
| SYNC A SOURCE | switch | — | 641 |
| SYNC TYPE | switch | — | Left = Hard Sync (resets VCO A waveform at each positive zero-crossing of sync source); center = No Sync; right = Soft Sync (flips VCO A waveform at positive zero-crossing of sync source).641 |
| TZFM/EXP switch | switch | — | 641 |
| VCF ENV Amount | fader | — | 641 |
| VCF FM 1 Amount | fader | — | 641 |
| VCF FM 2 Amount | fader | — | 641 |
| VCO/LFO switch | switch | — | VCO (left) = audio rate; LFO (right) = 1/1000 of VCO frequency, allowing cycles as slow as approximately 50 seconds.641 |
Firmware history 0 versions
No firmware history recorded.
References 2
-
[641]
Intellijel Atlantix Manual (2024-09-12)manual● verified 2026-05-21
-
[642]
Intellijel Atlantix product pageproduct_page⚠ verified 2026-05-21 · manufacturer changed since last verified