intellijel/mems-mic
MEMS Mic
2HP MEMS omni microphone module with CV-controllable output level, highpass filter switch, and activity/overload LED indicators.790
Capabilities 1
- Microphonemicrophone
- MEMS omni microphone with flat frequency response (~6Hz to 20kHz), CV-controllable output level, and optional 180Hz highpass filter.790
Jacks 2 (1 in / 1 out)
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (1) | |||
| LEVEL | cv | 0V to 10V | Linear CV input for level control, attenuated by LEVEL Slider. Normalled to +5V. 5V = Unity Gain, 0V = silence, 10V = +6dB above unity gain.790 |
| Outputs (1) | |||
| OUT | audio | — | Microphone audio output.790 |
Parameters 2
| Name | Type | Range | Behavior |
|---|---|---|---|
| Highpass Filter Switch | switch | — | Engages a low frequency roll-off at 180Hz with a 6dB/oct slope.790 |
| LEVEL Slider | fader | — | Attenuates the LEVEL CV input signal. When CV is patched, acts as an attenuator for the CV. When no CV is patched, the normalled +5V is attenuated by the slider to set the output level directly.790 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [790]
-
[791]
Intellijel MEMS Mic product pageproduct_page● verified 2026-05-23