doepfer/a-140-3
Doepfer A-140-3 ADSR Envelope
4 HP ADSR envelope by Doepfer: 3 inputs, 2 outputs, 8 controls, 2 modes.
Inputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Gate Input 2021 | gate input gate | ≤ 12 V threshold 5 V | → Envelope |
| Retrigger Input 2021 | retrigger input trigger | ≤ 12 V threshold 5 V | → Envelope |
| CVT Input 2021 | time CV cv | — | normalled from internal fixed voltage → A, D, R attenuated by CVT attenuator |
The documents don't state: voltage, scaling, audio rate (CVT Input); polarity, coupling, impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Envelope Output 1 2021 | normal envelope cv | 0 to 10 V, unipolar | from Envelope |
| Envelope Output 2 2021 | normal or inverted envelope cv | — | from Envelope selected by Output 2 jumper = normal, Output 2 jumper = inverted In 2 modes
|
The documents don't state: scaling, coupling, audio rate, impedance (all outputs).
Controls 8
| Control | What it does | Affects | Positions |
|---|---|---|---|
| A 2021 | attack time knob · 1 to 30000 ms | Envelope | — |
| D 2021 | decay time knob · 1 to 30000 ms | Envelope | — |
| S 2021 | sustain level knob | Envelope | — |
| R 2021 | release time knob · 1 to 30000 ms | Envelope | — |
| CVT attenuator 2021 | CVT amount knob | CVT Input, A, D, R | — |
| CVT assignment jumpers 2021 | CVT target and direction jumper | CVT Input, A, D, R |
|
| CVT normal jumper 2021 | CVT socket normalling jumper | CVT Input |
|
| Output 2 jumper 2021 | output 2 polarity jumper | Envelope Output 2 |
|
Blocks 1
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Envelope | ADSR envelope generator | Envelope generator | Gate Input, Retrigger Input, CVT Input | A, D, S, R, CVT attenuator, CVT assignment jumpers, CVT normal jumper, Output 2 jumper | Envelope Output 1, Envelope Output 2 | 2021 |
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Output 2 normal | output polarity | Output 2 jumper = normal | internal jumper | 2021 |
| Output 2 inverted | output polarity | Output 2 jumper = inverted | internal jumper | 2021 |
Specs 7
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| Envelope | curve shape | exponential | 2021 |
| Envelope | time control | voltage controlled | 2021 |
| CVT | factory assignment | A, D, R | 2021 |
| CVT socket | factory normalling | fixed voltage | 2021 |
| Envelope Output 2 | factory setting | not inverted | 2021 |
| LED | displays | envelope output | 2021 |
| Inverted envelope | shape | same, negative voltage | 2020 |
Behavior 8
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Envelope | gate goes high | envelope starts, attack | — | 2020 |
| Envelope | attack peak reached | decays to sustain level | — | 2020 |
| Envelope | gate held | sustain level holds | — | 2020 |
| Envelope | gate ends | release to zero | — | 2020 |
| Envelope | retrigger pulse while gate open | restarts from scratch | — | 2020 |
| Gate Input | below +5V or slow edges | envelope not triggered correctly | — | 2021 |
| CVT Input | unpatched, normalled jumper | CVT knob sets times | — | 2021 |
| CVT assignment jumpers | set | choose parameters and direction | — | 2021 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| ADSR Envelope | block | patchable | block Envelope: ADSR, Envelope Output 1 | 2021 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 20 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 40 mm |
Other ADSR Envelope modules
Sources 2
- [2020]
- [2021]