ajh-synth/minimod-dual-contour
AJH Synth MiniMod Dual Contour ADSR Envelope
12 HP ADSR envelope by AJH Synth: 2 inputs, 2 outputs, 11 controls, 4 modes.
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Gate 1 1016 inferred from the documents | gate input gate, trigger | 2 to 12 V, unipolar threshold 2 V | normalled from bus trigger → Contour Generator 1 |
| Gate 2 1016 inferred from the documents | gate input gate, trigger | 2 to 12 V, unipolar threshold 2 V | normalled from bus trigger → Contour Generator 2 |
The documents don't state: coupling, impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Output 1 1016 inferred from the documents | contour output cv | 0 to 8 V, unipolar | from Contour Generator 1 |
| Output 2 1016 inferred from the documents | contour output cv | 0 to 8 V, unipolar | from Contour Generator 2 |
The documents don't state: impedance (all outputs).
Controls 11
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Attack 1 1016 | attack time knob | Contour Generator 1 | — |
| Decay 1 1016 | decay/release time knob | Contour Generator 1 | — |
| Sustain 1 1016 | sustain level knob · 0 to 10 dial position | Contour Generator 1 | — |
| Decay switch 1 1016 | AD/ADSD select switch | Contour Generator 1 |
|
| Manual trigger 1 1016 | manual gate button | Contour Generator 1 | — |
| Output jumper 1016 | output level reduce jumper | — |
|
| Attack 2 1016 | attack time knob | Contour Generator 2 | — |
| Decay 2 1016 | decay/release time knob | Contour Generator 2 | — |
| Sustain 2 1016 | sustain level knob · 0 to 10 dial position | Contour Generator 2 | — |
| Decay switch 2 1016 | AD/ADSD select switch | Contour Generator 2 |
|
| Manual trigger 2 1016 | manual gate button | Contour Generator 2 | — |
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Contour Generator 1 | contour envelope generator | Envelope generator | Gate 1 | Attack 1, Decay 1, Sustain 1, Decay switch 1, Manual trigger 1 | Output 1 | 1016 |
| Contour Generator 2 | contour envelope generator | Envelope generator | Gate 2 | Attack 2, Decay 2, Sustain 2, Decay switch 2, Manual trigger 2 | Output 2 | 1016 |
Modes 4
Specs 11
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Output | nominal range | 0 to 8 V | — | 1016 |
| Output | maximum level | 10.5 V | multiple retriggering | 1016 |
| Output jumper | output reduction | 30 % | — | 1016 |
| Gate | trigger level | 2 to 12 V | — | 1016 |
| Sustain | original Model D maximum | 80 % | — | 1016 |
| Sustain | original behaviour setting | 8.5 dial position | — | 1016 |
| circuit | supply voltages | -10 to 9.3 V | — | 1016 |
| module | width | 12 hp | — | 1016 |
| module | depth | 26 mm | — | 1016 |
| module | current +12V | 38 mA | — | 1016 |
| module | current -12V | 15 mA | — | 1016 |
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| contour generators | response curve | exponential | 1016 |
| contour generators | circuit | discrete transistor | 1016 |
| contour generators | decay/release slopes | identical | 1016 |
| contour generators | retrigger | level accumulates | 1016 |
| Gate | negative voltage | protected | 1016 |
| envelope status LEDs | present | yes | 1016 |
| Sustain | maximum | full sustain | 1016 |
Behavior 12
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| contour | AD mode, gate held | no effect after trigger | — | 1016 |
| contour | AD mode, attack completes | decay begins | — | 1016 |
| Sustain | AD mode | deactivated | — | 1016 |
| contour | ADSD mode, gate high | holds sustain level | — | 1016 |
| contour | ADSD mode, gate released | decay curve begins | — | 1016 |
| contour | retrigger before cycle completes | next attack peak higher | — | 1016 |
| contour | three or four rapid retriggers | maximum level reached | — | 1016 |
| Gate | unpatched | responds to bus triggers | — | 1016 |
| Gate | patch lead inserted | overrides bus trigger | — | 1016 |
| Manual trigger | used with Gate input | both work independently | — | 1016 |
| Sustain | set to 8.5 | original Model D behaviour | — | 1016 |
| Output jumper | fitted | output reduced 30% | — | 1016 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| ADSR Envelope | block | patchable | blocks Contour Generator 1/2, ADSD | 1016 |
Power
| +12 V | 38 mA |
|---|---|
| −12 V | 15 mA |
| +5 V | — |
| Width | 12 HP |
| Depth | 26 mm |
Other ADSR Envelope modules
Sources 1
- [1016]