doepfer/a-140-2
Doepfer A-140-2 ADSR Envelope
8 HP ADSR envelope by Doepfer: 6 inputs, 4 outputs, 17 controls, 2 modes.
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Gate 1 1675 | gate input gate | ≤ 12 V threshold 5 V | → ADSR 1 |
| Retrigger 1 1675 | retrigger input trigger, gate | ≤ 12 V threshold 5 V | → ADSR 1 |
| CVT 1 1675 | time control input cv | — | normalled from internal fixed voltage → ADSR 1 attack time, ADSR 1 decay time, ADSR 1 release time attenuated by CVT 1 control selected by CVT assignment jumpers = factory A+D+R |
| Gate 2 1675 | gate input gate | ≤ 12 V threshold 5 V | → ADSR 2 |
| Retrigger 2 1675 | retrigger input trigger, gate | ≤ 12 V threshold 5 V | → ADSR 2 |
| CVT 2 1675 | time control input cv | — | normalled from internal fixed voltage → ADSR 2 attack time, ADSR 2 decay time, ADSR 2 release time attenuated by CVT 2 control selected by CVT assignment jumpers = factory A+D+R |
The documents don't state: voltage (CVT 1, CVT 2); impedance (all inputs).
Outputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Envelope Output 1 (1) 1675 | normal envelope output cv | 0 to 10 V, unipolar | from ADSR 1 |
| Envelope Output 2 (1) 1675 | normal or inverted envelope cv | — | from ADSR 1 selected by Output 2 jumper = normal, Output 2 jumper = inverted In 2 modes
|
| Envelope Output 1 (2) 1675 | normal envelope output cv | 0 to 10 V, unipolar | from ADSR 2 |
| Envelope Output 2 (2) 1675 | normal or inverted envelope cv | — | from ADSR 2 selected by Output 2 jumper = normal, Output 2 jumper = inverted In 2 modes
|
The documents don't state: impedance (all outputs).
Controls 17
| Control | What it does | Affects | Positions |
|---|---|---|---|
| A 1 1675 | attack time knob · 1 to 30000 ms | ADSR 1 | — |
| D 1 1675 | decay time knob · 1 to 30000 ms | ADSR 1 | — |
| S 1 1675 | sustain level knob | ADSR 1 | — |
| R 1 1675 | release time knob · 1 to 30000 ms | ADSR 1 | — |
| CVT 1 control 1675 | CVT attenuator knob | CVT 1, ADSR 1 | — |
| Bus gate jumper 1 1675 | bus gate access jumper | ADSR 1, Gate 1 |
|
| A 2 1675 | attack time knob · 1 to 30000 ms | ADSR 2 | — |
| D 2 1675 | decay time knob · 1 to 30000 ms | ADSR 2 | — |
| S 2 1675 | sustain level knob | ADSR 2 | — |
| R 2 1675 | release time knob · 1 to 30000 ms | ADSR 2 | — |
| CVT 2 control 1675 | CVT attenuator knob | CVT 2, ADSR 2 | — |
| Bus gate jumper 2 1675 | bus gate access jumper | ADSR 2, Gate 2 |
|
| CVT assignment jumpers 1675 | CVT target parameters jumper | ADSR 1, ADSR 2 |
|
| CVT direction jumper 1675 | CVT control direction jumper | ADSR 1, ADSR 2 |
|
| CVT normalling jumper 1675 | CVT normal to voltage jumper | CVT 1, CVT 2 |
|
| Output 2 jumper 1675 | output 2 polarity jumper | Envelope Output 2 (1), Envelope Output 2 (2) |
|
| Gate normalling jumper 1675 | Gate 2 normal jumper | Gate 2, ADSR 2 |
|
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| ADSR 1 | ADSR envelope generator | Envelope generator | Gate 1, Retrigger 1, CVT 1 | A 1, D 1, S 1, R 1, CVT 1 control | Envelope Output 1 (1), Envelope Output 2 (1) | 1675 |
| ADSR 2 | ADSR envelope generator | Envelope generator | Gate 2, Retrigger 2, CVT 2 | A 2, D 2, S 2, R 2, CVT 2 control | Envelope Output 1 (2), Envelope Output 2 (2) | 1675 |
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Output 2 normal | output polarity | Output 2 jumper = normal | internal jumper | 1675 |
| Output 2 inverted | output polarity | Output 2 jumper = inverted | internal jumper | 1675 |
Specs 11
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1675 |
| module | depth | 40 mm | — | 1675 |
| module | +12V current | 50 mA | — | 1675 |
| module | -12V current | 40 mA | — | 1675 |
| ADSR | attack/decay/release time | 1 to 30000 ms | — | 1675 |
| ADSR | envelope output range | 0 to 10 V | — | 1675 |
| ADSR | attack peak | 10 V | — | 1675 |
| Gate input | minimum gate level | 5 V | — | 1675 |
| Gate input | maximum gate level | 12 V | — | 1675 |
| Retrigger input | minimum retrigger level | 5 V | — | 1675 |
| Retrigger input | maximum retrigger level | 12 V | — | 1675 |
Properties 6
Behavior 8
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| CVT input | unpatched, factory setting | internal fixed voltage | — | 1675 |
| CVT control | CVT normalled, unpatched | shifts assigned times together | — | 1675 |
| CVT input | voltage rises, factory setting | times shorten | — | 1675 |
| Gate 2 | normalling jumper installed | Gate 1 also triggers ADSR 2 | — | 1675 |
| ADSR | bus jumper installed | bus gate triggers envelope | — | 1675 |
| Gate input | level below +5V | envelope not triggered correctly | — | 1675 |
| Gate input | slopes too slow | envelope not triggered correctly | — | 1675 |
| Envelope Output 2 | jumper set inverted | outputs inverted envelope | — | 1675 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| ADSR Envelope | block | patchable | block ADSR 1/2: envelope generator | 1675 |
Power
| +12 V | 50 mA |
|---|---|
| −12 V | 40 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 40 mm |
Other ADSR Envelope modules
Sources 1
- [1675]