alm-busy-circuits/pamelas-pro-workout

ALM Busy Circuits Pamela's PRO Workout Trigger / Euclidean Sequencer · Quantizer

8 HP trigger / euclidean sequencer and quantizer by ALM Busy Circuits: 4 inputs, 8 outputs, 32 controls, 7 modes.

ALM Busy Circuits · ALM-034 Pamela's PRO Workout Manual (v0.35, fw 130) (PDF) ↗

Master Clock · Tempo / Clock Sync · Clock Divider / Multiplier · LFO · Random / Sample & Hold CV · ADSR Envelope · Euclidean rhythm · Trigger / Euclidean Sequencer · Probability / Bernoulli Gate · Quantizer · Logic Gates · Voltage Math / Precision Adder

Inputs 4

Inputs
JackWhat it doesRangeConnections
Clk 645external clock input
clock, cv, trigger
threshold 0.7 V
→ BPM master clock
In 3 modes
  • CLOCK: external clock sync → BPM master clock
  • CV: assignable CV input → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • NEXT BANK: load next bank → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
Run 645run, reset or CV
gate, trigger, cv
threshold 0.7 V
→ BPM master clock
In 5 modes
  • RUN: clock runs while high → BPM master clock
  • RESET: reset to initial step → BPM master clock
  • CV: assignable CV input → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • PREV BANK: load previous bank → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • ROTATE: rotate output range → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
CV1 645assignable CV input
cv, trigger
0 to 5 V, unipolar
→ Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
CV2 645assignable CV input
cv, trigger
0 to 5 V, unipolar
→ Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8

The documents don't state: voltage (Clk, Run); impedance (all inputs).

Outputs 8

Outputs
JackWhat it doesRangeConnections
Output 1 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 1
Output 2 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 2
Output 3 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 3
Output 4 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 4
Output 5 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 5
Output 6 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 6
Output 7 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 7
Output 8 645clocked voltage output
cv, gate, trigger, clock, pitch
0 to 5 V, unipolar
from Output 8

The documents don't state: impedance (all outputs).

Controls 32

Controls
ControlWhat it doesAffectsPositions
program knob 645select and edit
knob · 10 to 330 BPM
BPM master clock, Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Start/Stop 645start / stop clock
button
BPM master clock
  • press stopped: start clock
  • press running: stop and reset
Modifier 645clock divide / multiply
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • GATE: held high while playing
  • OFF: no output
  • START: single pulse at start
  • STOP: single pulse at stop
Shape 645output waveform
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Gate/Pulse: pulse wave
  • Ratchet x2: pulse split in quarters
  • Ratchet x4: pulse split in eighths
  • Triangle: triangle, width slews
  • Trapezoid: flat-top triangle
  • Sine: sine, width leans
  • Hump: half sine / parabola
  • Exp Envelope: exponential envelope
  • Log Envelope: logarithmic envelope
  • Classic Random: sample and hold random
  • Smooth Random: smooth random
Width / Slew 645waveform width or slew
menu setting · 0 to 100 %
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Level 645max output level
menu setting · 0 to 100 % of 5V
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Offset 645output bias
menu setting · 0 to 100 % of 5V
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Phase 645waveform phase shift
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Probability 645step occurrence likelihood
menu setting · 0 to 100 %
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Euclidean Steps 645Euclidean pattern steps
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Euclidean Trigs 645Euclidean pattern hits
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Pad 645empty padding steps
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Shift 645rotate Euclidean pattern
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Loop 645beat based loop length
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Loop Nap 645loops to sleep
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Loop Wake 645loops to run
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Loop Shift 645offset Nap/Wake start
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Cross Op 645cross output operation
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • None: off
  • MIX: add and halve
  • ADD: add, clip overflow
  • SUB: subtract, clip overflow
  • MIN: minimum of two
  • MAX: maximum of two
  • HOLD: freeze while source high
  • S&H: sample on rising source
  • MASK: zero when source zero
  • NOT: zero when source high
  • BitOR: bitwise OR
  • BitXOR: bitwise XOR
  • BitAND: bitwise AND
  • SEED: reset random seeds
Cross Src 645cross operation source
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Out 1-8: another output
  • IN1: sampled CV1 value
  • IN2: sampled CV2 value
  • CVx: CV selects source output
  • Axon A / B: Axon-2 button
Flex 645micro timing operation
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • HUMAN: random timing errors
  • SWING: delay alternate steps
  • RAMP UP: increasing step time
  • RAMP DOWN: decreasing step time
  • HUMP: increase then decrease
  • DELAY: delay and crop step
  • PWR2: step time doubled
Invert 645invert final output
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Quantiser 645scale quantise output
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Scope 645output waveform display
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Load, Save and Reset 645output save / recall
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Load: recall output
  • Save: store output
  • Reset: default 50% pulse
  • Seed: new random values
Input: Clk 645Clk input action
menu setting
Clk
  • CLOCK: external clock sync
  • CV: extra CV input
  • NEXT BANK: trigger loads next bank
EXT Clock PPQN 645external clock resolution
menu setting
Clk—
Input: Run 645Run input action
menu setting
Run
  • RUN: gate runs clock
  • RESET: trigger resets to start
  • CV: extra CV input
  • PREV BANK: trigger loads previous bank
  • ROTATE: trigger rotates outputs
UI Theme 645display theme
menu setting
——
Enc Hold Time 645knob hold duration
menu setting
program knob—
Load Bank 645load all outputs, BPM
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Save Bank 645save all outputs, BPM
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Reset All 645reset all outputs
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—

Blocks 9

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
BPM master clockBPM based clockClock generatorClk, Runprogram knob, Start/Stop, Input: Clk, Input: Run, EXT Clock PPQNOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8645
Output 1clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 1645
Output 2clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 2645
Output 3clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 3645
Output 4clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 4645
Output 5clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 5645
Output 6clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 6645
Output 7clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 7645
Output 8clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdClk, Run, CV1, CV2Modifier, Shape, Width / Slew, Level, Offset, Phase, Probability, Euclidean Steps, Euclidean Trigs, Pad, Shift, Loop, Loop Nap, Loop Wake, Loop Shift, Cross Op, Cross Src, Flex, Invert, Quantiser, Scope, Load, Save and ResetOutput 8645

Modes 7

Modes
ModeKindSelected bySelection methodSource
Clocked modifieroutput timingModifier = divisor or multiplierprogram knob on output screen645
Utility modifieroutput timing—Modifier GATE/OFF/START/STOP645
Triggered modifierenvelope-like output—Modifier triggered types645
CLOCKClk input modeInput: Clk = CLOCKSettings > Input: Clk645
RUNRun input modeInput: Run = RUNSettings > Input: Run645
RESETRun input modeInput: Run = RESETSettings > Input: Run645
ROTATERun input modeInput: Run = ROTATESettings > Input: Run645

Hidden functions 9

Hidden functions
FunctionTriggerAffectsSource
Extended parametershold program knob >1s on output screenOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8645
Settingslong hold program knob on BPM screenBPM master clock645
Same parameter other outputhold Start/Stop, turn program knobOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8645
Mute outputhold Start/Stop, click program knobOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8645
CV attenuation and offsetpush-hold on assigned CV optionCV1, CV2, Clk, Run645
CV assignscroll past lowest parameter valueCV1, CV2, Clk, Run645
User scale editlong hold with User scale selectedQuantiser645
Factory resethold program knob while poweringOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8645
Scope fullscreenclick program knob on ScopeScope645

Specs 18

Specs
SubjectQuantityValueConditionSource
BPM master clocktempo range10 to 330 BPM—645
BPM master clocktempo range10 to 303 BPM—646
Modifiermax division16384 divisor—645
Modifiermax multiplication192 multiplier—645
outputsresolution12 bit—645
outputsmax update frequency3.8 kHz—645
Levelper 20% step1 V—645
bankscount64 banks—645
bankscount7 banks56 slots646
Quantiseruser scales3 scales—645
EXT Clock PPQNdefault24 PPQN—645
Clk / Runtrigger threshold0.7 Vrising edge minimum645
Axon expanderextra CV inputs4 inputs—645
Run RESETclock pulses before auto start2 pulsesRESET mode645
modulewidth8 HP—645
modulecurrent draw +12V60 mA—645
modulecurrent draw -12V10 mA—645
moduledepth32 mmapprox with power header645

Properties 14

Properties
SubjectPropertyValueSource
outputsbufferingbuffered low impedance645
outputscount8645
settingsretained at power offyes645
CV inputsper parameterattenuation and offset645
CV attenuationsignpositive or negative645
CV inputassignable parametersmany per input645
Loop ShiftCV controlno645
Cross opsorderbefore quantisation645
Quantiserstandard1V/octave645
Axonsupported countone645
expandersheadersMIDI-EX and EXPAND645
PPEXP1 / PPEXP2addsDin Sync, MIDI clock645
modulefirmware updateUSB-C drive645
modulereverse power protectionyes645

Behavior 20

Behavior rules
SubjectWhenEffectModeSource
CV inputsoutside 0-5Vignored, safe—645
Start/Stoppressed while runningstops and resets clock—645
skipped stepnon-random waveformno voltage except offset—645
skipped steprandom waveformvalue held—645
extended parametersutility modifier selectednot available—645
triggered modifiertrigger on assigned inputoutput starts, if playing—645
Euclidean Stepszeroother Euclidean parameters hidden—645
Euclidean Trigsnot below stepsno pattern unless CV—645
Phasepulse >50% shifted >50%may double trigger—645
parametersecond CV assignednot allowed—645
Clk / Run as CVnot set to CVgreyed out—645
Cross Src IN1/IN2combined with CVlower resolution—645
Axon buttonsno Axon-2 connectedinactive—645
RunRESET mode, ext clockauto start and stopRESET645
rotated outputsclock runningnot editableROTATE645
rotated outputsclock stoppedreturn to originalROTATE645
PPQNmismatched with external clockwrong BPM reportedCLOCK645
LoopactiveNap, Wake, Shift appear—645
random waveformLoop setpattern repeats, savable—645
RunRESET moderesponds rising edge onlyRESET646

Functions 12

Function tags
FunctionBasisScopeEvidenceSource
Master Clockblockpatchableblock BPM master clock: BPM based clock645
Tempo / Clock Syncjackpatchablejack Clk: external clock sync, PPQN645
Clock Divider / Multipliercontrolpatchablecontrol Modifier: /16384 to x192 per output645
LFOcontrolpatchablecontrol Shape: Triangle / Sine per output645
Random / Sample & Hold CVcontrolpatchablecontrol Shape: Classic / Smooth Random645
ADSR Envelopemodepatchabletriggered modifier: behaves as envelope645
Euclidean rhythmcontrolpatchablecontrols Euclidean Steps / Trigs645
Trigger / Euclidean SequencercontrolpatchableEuclidean / probability step skipping patterns645
Probability / Bernoulli Gatecontrolpatchablecontrol Probability: step likelihood645
Quantizercontrolinternalcontrol Quantiser: output to scale645
Logic Gatescontrolpatchablecontrol Cross Op: BitOR / BitXOR / BitAND / NOT645
Voltage Math / Precision Addercontrolpatchablecontrol Cross Op: ADD / SUB / MIN / MAX645

Power

+12 V60 mA
−12 V10 mA
+5 V—
Width8 HP
Depth32 mm

Other Trigger / Euclidean Sequencer modules

All Trigger / Euclidean Sequencer modules →

Firmware 18

VersionReleasedNotes
130—Better display of assigned CV values. Show min/max range for CV attenuation and offset.645
129—Fix rotation lockup (again!).645
128—Add new x1.5 multiplier (quintuplets). Add/rename quantiser scales to sync with MCO. Add new 'POWER OF 2' Flex op. Allow cross ops for triggered outputs. Allow triggered outputs to have length set in beats. Fix 100% pulse width bug. Manual updates.645
127—Fix BPM change on stop when externally synced without RUN. Fix potential rotation lockup. Disable Run settings option if set to rotate and rotated. Fix Win 10 initialisation bug in VCV.645
126—Fix BPM change on stop issue when externally synced (without RUN).645
125—Add support for Axon 2 buttons as Cross Op sources. Improve external syncing with better clock phase locking on run signal. Improve VCV Rack clocking. Fix issue where double-clicking a param to reset could cause a param issue.645
124—Fix rare potential lockup where Pam refuses to start.645
123—Introduced VCV Rack support. Run input in reset mode now only responds to rising edge. Add new Delay option to Flex (previously from PNW). Fix CV input naming when changing Offset/Attenuation.645
122—Factory test mode update (no user visible changes). Fix Axon-2 button naming. Fix triangle/trapeze waves on very low divisions.645
121—Re-add improved output rotation feature from PNW. Fix expander MIDI and Din clock dropping first pulse (potential 20ms lag on clocked devices).645
120—Fix CV params never reaching 100%. Allow CV control of Euclidean trigger count to reach zero. Add simpler boolean logic cross ops. Reorder Cross Ops. Improve loops display and add Shift parameter. Save BPM with bank. Allow bank loads via Clk/Run inputs. Add new 'triggered' modifier type for envelope-like outputs.645
119—Add CV attenuversion support. Add Min/Max cross ops. Add new 'Trek' UI theme. Fix waveform width at low divide factors. Initial Axon-2 support.645
118—Theme rendering optimisation. Production related improvement.645
117—Support missing external x8 PPQN clock. If Run is assigned to CV, autostart on external clock presence. Fix probability issue causing unexpected skips.645
116—Add fullscreen mode to scope. Fix storage corruption when writing to last bank slot. Fix loop nap reset. Reduce jitter in external clocked BPM display. Fix Swing losing sync when output modifier changed.645
115—Fix bug where BPM was not getting saved correctly.645
114—Fix bug where inactive theme colour was not rendering correctly.645
113—Boot fixes.645

Sources 2

  1. [645]
    ALM-034 Pamela's PRO Workout Manual (v0.35, fw 130) ↗manual · primary
    ⚠ verified 2026-05-21 · the manufacturer changed this document since
  2. [646]
    ALM-034 Pamela's PRO Workout product page ↗product page
    ⚠ verified 2026-05-21 · the manufacturer changed this document since