befaco/molten-bypass
Befaco Molten Bypass Sequential / Voltage Switch
4 HP sequential / voltage switch by Befaco: 5 inputs, 4 outputs, 4 controls, 4 modes.
Befaco · Molten Bypass manual (PDF) ↗
Send / return · Sequential / Voltage Switch · Stereo Inputs / Outputs
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Your signal in L 1467 | signal input audio, cv | coupling dc | → Bypass, Effects loop |
| Your signal in R 1467 | signal input audio, cv | coupling dc | → Bypass, Effects loop |
| Effects loop return L 1467 | return from effect audio, cv | coupling dc | → Effects loop attenuated by FX Gain |
| Effects loop return R 1467 | return from effect audio, cv | coupling dc | → Effects loop attenuated by FX Gain |
| CV Control 1467 | bypass gate/trigger control gate, trigger | — | → Bypass, Launch |
The documents don't state: voltage, polarity, scaling, audio rate, impedance (all inputs); threshold, coupling (CV Control).
Outputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Your signal out L 1467 | signal output audio, cv | coupling dc | from Bypass, Effects loop |
| Your signal out R 1467 | signal output audio, cv | coupling dc | from Bypass, Effects loop |
| Effects loop send L 1467 | send to effect audio, cv | coupling dc | from Your signal in L |
| Effects loop send R 1467 | send to effect audio, cv | coupling dc | from Your signal in R |
The documents don't state: voltage, polarity, scaling, audio rate, impedance (all outputs).
Controls 4
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Launch 1467 | engages effects loop button | Bypass |
|
| SOFT/HARD switch 1467 | bypass type switch | Bypass, Effects loop |
|
| Gate/Latch control 1468 | button/CV response switch | Launch, CV Control |
|
| FX Gain 1467 | effects return level knob | Effects loop | — |
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Bypass | CV controllable effects bypass | Sequential / voltage-controlled switch | Your signal in L, Your signal in R, CV Control | Launch, SOFT/HARD switch, Gate/Latch control | Your signal out L, Your signal out R | 1467 |
| Effects loop | effects loop insert | — | Effects loop return L, Effects loop return R | FX Gain | Effects loop send L, Effects loop send R | 1467 |
Modes 4
Specs 5
Properties 4
Behavior 7
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Bypass | button unlit (default) | input straight to output | — | 1467 |
| Bypass | button hit | audio through effects loop | — | 1467 |
| HARD | bypass engaged | loop return cut immediately | HARD | 1467 |
| SOFT | bypass engaged | return active, tails remain | SOFT | 1467 |
| Launch | set momentary (gate) | effects while held | — | 1467 |
| Launch | set latch | tap on, tap off | — | 1467 |
| Mono use | stereo channels used separately | two mono effects loops | — | 1467 |
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Send / return | jack | patchable | effects loop send/return jacks | 1467 |
| Sequential / Voltage Switch | block | patchable | CV controllable effects bypass | 1467 |
| Stereo Inputs / Outputs | property | patchable | full stereo signal path | 1468 |
Power
| +12 V | 33 mA |
|---|---|
| −12 V | 26 mA |
| +5 V | 0 mA |
| Width | 4 HP |
| Depth | 42 mm |
Other Sequential / Voltage Switch modules
Sources 2
- [1467]
- [1468]