instruo/tain
Instruō Tain Sequential / Voltage Switch
4 HP sequential / voltage switch by Instruō: 2 inputs, 6 bidirectional jacks, 5 controls, 4 modes.
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Switch Control Input 1 1896 | switch state control gate, trigger | — | → Channel 1 selected by Mode Toggle 1 = up (Momentary), Mode Toggle 1 = down (Latching) In 2 modes
|
| Switch Control Input 2 1896 inferred from the documents | switch state control gate, trigger | — | → Channel 2 selected by Mode Toggle 2 = up (Momentary), Mode Toggle 2 = down (Latching) In 2 modes
|
The documents don't state: voltage, threshold, impedance (all inputs).
Bidirectional jacks 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Ch1 I/O A 1896 inferred from the documents | switch I/O audio, cv, gate, trigger | audio rate yes | → Channel 1 In 2 modes
|
| Ch1 I/O B 1896 inferred from the documents | switch I/O audio, cv, gate, trigger | audio rate yes | → Channel 1 In 2 modes
|
| Ch1 I/O C 1896 inferred from the documents | switch I/O audio, cv, gate, trigger | audio rate yes | → Channel 1 In 2 modes
|
| Ch2 I/O A 1896 inferred from the documents | switch I/O audio, cv, gate, trigger | audio rate yes | → Channel 2 In 2 modes
|
| Ch2 I/O B 1896 inferred from the documents | switch I/O audio, cv, gate, trigger | audio rate yes | → Channel 2 In 2 modes
|
| Ch2 I/O C 1896 inferred from the documents | switch I/O audio, cv, gate, trigger | audio rate yes | → Channel 2 In 2 modes
|
The documents don't state: voltage, coupling, impedance (all bidirectional jacks).
Controls 5
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Switch Button 1 1896 | change switch state button | Channel 1 | In 2 modes
|
| Switch Button 2 1896 | change switch state button | Channel 2 | In 2 modes
|
| Mode Toggle 1 1896 | momentary/latching select switch | Switch Control Input 1, Switch Button 1 |
|
| Mode Toggle 2 1896 inferred from the documents | momentary/latching select switch | Switch Control Input 2, Switch Button 2 |
|
| Reference Trimmer 1896 | reference voltage knob · -10 to 10 V · bipolar | bottom I/O jack | — |
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel 1 | analogue bidirectional switch | Sequential / voltage-controlled switch | Ch1 I/O A, Ch1 I/O B, Ch1 I/O C, Switch Control Input 1 | Switch Button 1, Mode Toggle 1 | Ch1 I/O A, Ch1 I/O B, Ch1 I/O C | 1896 |
| Channel 2 | analogue bidirectional switch | Sequential / voltage-controlled switch | Ch2 I/O A, Ch2 I/O B, Ch2 I/O C, Switch Control Input 2 | Switch Button 2, Mode Toggle 2 | Ch2 I/O A, Ch2 I/O B, Ch2 I/O C | 1896 |
Modes 4
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Momentary Mode | switch control behaviour | Mode Toggle 1 = up | toggle per channel | 1896 |
| Latching Mode | switch control behaviour | Mode Toggle 1 = down | toggle per channel | 1896 |
| 1 in 2 out | channel configuration | — | patching | 1896 |
| 2 in 1 out | channel configuration | — | patching | 1896 |
Specs 5
Properties 7
Behavior 8
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Switch Button | Momentary, control signal present | XOR with Switch Input | Momentary Mode | 1896 |
| switch state | Momentary, Switch Input high | secondary state | Momentary Mode | 1896 |
| switch state | Momentary, button held | secondary state | Momentary Mode | 1896 |
| switch state | Momentary, input low, released | returns to primary | Momentary Mode | 1896 |
| switch state | Latching, rising edge | toggles state | Latching Mode | 1896 |
| switch state | Latching, button press | toggles state | Latching Mode | 1896 |
| Switch Button | secondary state active | illuminates white | — | 1896 |
| bottom I/O jack | unpatched | receives Reference Trimmer voltage | — | 1896 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Sequential / Voltage Switch | block | patchable | two analogue bidirectional switch channels, button and Switch Input | 1896 |
Power
| +12 V | 10 mA |
|---|---|
| −12 V | 5 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 27 mm |
Other Sequential / Voltage Switch modules
Sources 2
- [1896]
- [1897]