doepfer/a-150-1
Doepfer A-150-1 Dual Voltage Controlled Switch Sequential / Voltage Switch
4 HP sequential / voltage switch by Doepfer: 2 inputs, 6 bidirectional jacks.
Doepfer · A-150 / A-150-1 Dual Voltage Controlled Switch manual (English) (PDF) ↗
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV 525 | switch control input gate, cv | threshold 3.6 V audio rate yes | → Switch 1 |
| CV (2) 525 | switch control input gate, cv | threshold 3.6 V audio rate yes | → Switch 2 |
The documents don't state: voltage, coupling, impedance, normalling (all inputs).
Bidirectional jacks 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| O/I 525 | common out / input audio, cv, gate | -12 to 12 V impedance 1000 Ω | → Switch 1 selected by CV = low, CV = high |
| I/O 1 525 | in / output 1 audio, cv, gate | -12 to 12 V | → Switch 1 selected by CV = low |
| I/O 2 525 | in / output 2 audio, cv, gate | -12 to 12 V | → Switch 1 selected by CV = high |
| O/I (2) 525 | common out / input audio, cv, gate | -12 to 12 V impedance 1000 Ω | → Switch 2 selected by CV = low, CV = high |
| I/O 1 (2) 525 | in / output 1 audio, cv, gate | -12 to 12 V | → Switch 2 selected by CV = low |
| I/O 2 (2) 525 | in / output 2 audio, cv, gate | -12 to 12 V | → Switch 2 selected by CV = high |
The documents don't state: coupling (all bidirectional jacks); normalling (O/I, O/I (2)).
Controls 0
The record lists no controls.
Blocks 2
Specs 8
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| O/I and I/O | signal range | -12 to 12 V | version 2 and later | 526 |
| O/I and I/O | signal range | -8 to 8 V | version 1 | 525 |
| CV | switching threshold | 3.6 V | — | 525 |
| O/I line | protection resistor | 1000 ohm | — | 526 |
| module | width | 4 HP | — | 526 |
| module | depth | 30 mm | — | 526 |
| module | current +12V | 30 mA | — | 526 |
| module | current -12V | 10 mA | — | 526 |
Properties 7
Behavior 5
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Switch | CV below ~3.6 V | O/I connected to I/O 1 | — | 525 |
| Switch | CV above ~3.6 V | O/I connected to I/O 2 | — | 525 |
| CV | audio-rate control voltage | audio frequency modulation results | — | 525 |
| O/I and I/O | beyond ±8 V, version 1 | module malfunctions | — | 525 |
| O/I | switching VCO pitch CV | small detuning from 1k resistor | — | 526 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Sequential / Voltage Switch | block | patchable | Switch 1/2: voltage-controlled switch | 525 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 30 mm |
Other Sequential / Voltage Switch modules
Sources 2
-
[525]
Doepfer A-150 / A-150-1 Dual Voltage Controlled Switch manual (English) ↗manual · primary● verified 2026-05-19
- [526]