befaco/muxlicer
Befaco Muxlicer Trigger / Euclidean Sequencer · Master Clock
16 HP trigger / euclidean sequencer and master clock by Befaco: 5 inputs, 11 outputs, 9 bidirectional jacks, 13 controls, 9 modes.
Befaco · Muxlicer User Manual (PDF) ↗
Sequential / Voltage Switch · Step Sequencer · Trigger / Euclidean Sequencer · Clock Divider / Multiplier · Tempo / Clock Sync · Master Clock · End-of-Cycle / End-of-Rise Output
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Address CV IN 572 | step address CV cv, audio | — | → Digital Step Controller In 3 modes
|
| Reset IN 572 | reset / one shot trigger, gate | — | → Digital Step Controller In 2 modes
|
| Clock IN 572 | external clock clock | — | → Digital Step Controller |
| Gate Mode IN 572 | gate behaviour CV cv | 0 to 10 V | normalled from +10V → Gate Generator attenuated by Gate Mode Knob |
| All IN 572 | feeds unpatched Mux I/Os audio, cv | — | → Mux I/O 1, Mux I/O 2, Mux I/O 3, Mux I/O 4, Mux I/O 5, Mux I/O 6, Mux I/O 7, Mux I/O 8 |
The documents don't state: voltage (Reset IN, Clock IN, All IN); threshold, impedance (all inputs).
Outputs 11
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Clock Out 572 | divided/multiplied clock clock | — | from Digital Step Controller |
| Gate Out 1 572 | step 1 gate gate | — | from Gate Generator |
| Gate Out 2 572 | step 2 gate gate | — | from Gate Generator |
| Gate Out 3 572 | step 3 gate gate | — | from Gate Generator |
| Gate Out 4 572 | step 4 gate gate | — | from Gate Generator |
| Gate Out 5 572 | step 5 gate gate | — | from Gate Generator |
| Gate Out 6 572 | step 6 gate gate | — | from Gate Generator |
| Gate Out 7 572 | step 7 gate gate | — | from Gate Generator |
| Gate Out 8 572 | step 8 gate gate | — | from Gate Generator |
| All Gates Out 572 | sum of all gates gate | — | from Gate Generator |
| EOC Out 572 | end of cycle trigger trigger | — | from Digital Step Controller |
The documents don't state: voltage, impedance (all outputs); pulse (Clock Out, EOC Out).
Bidirectional jacks 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Common I/O 572 | bidirectional common I/O audio, cv, pitch | — | → Analog Switch In 3 modes
|
| Mux I/O 1 572 | step 1 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 1 In 2 modes
|
| Mux I/O 2 572 | step 2 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 2 In 2 modes
|
| Mux I/O 3 572 | step 3 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 3 In 2 modes
|
| Mux I/O 4 572 | step 4 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 4 In 2 modes
|
| Mux I/O 5 572 | step 5 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 5 In 2 modes
|
| Mux I/O 6 572 | step 6 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 6 In 2 modes
|
| Mux I/O 7 572 | step 7 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 7 In 2 modes
|
| Mux I/O 8 572 | step 8 bidirectional I/O audio, cv | — | normalled from All IN → Analog Switch attenuated by Level Fader 8 In 2 modes
|
The documents don't state: voltage, impedance (all bidirectional jacks).
Controls 13
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Address Knob 572 | manual active step knob · 1 to 8 step | Digital Step Controller, Address CV IN |
|
| Play Switch 572 | momentary play/reset switch | Digital Step Controller |
|
| Speed Div/Mult encoder 572 | tempo, div/mult, CV range knob | Digital Step Controller, Clock Out, Common I/O | — |
| Gate Mode Knob 572 | gate behaviour select knob | Gate Generator, Gate Mode IN |
|
| CV range switch 572 | address CV range switch | Address CV IN |
|
| Level Fader 1 572 | step 1 level/CV fader | Mux I/O 1, Common I/O | — |
| Level Fader 2 572 | step 2 level/CV fader | Mux I/O 2, Common I/O | — |
| Level Fader 3 572 | step 3 level/CV fader | Mux I/O 3, Common I/O | — |
| Level Fader 4 572 | step 4 level/CV fader | Mux I/O 4, Common I/O | — |
| Level Fader 5 572 | step 5 level/CV fader | Mux I/O 5, Common I/O | — |
| Level Fader 6 572 | step 6 level/CV fader | Mux I/O 6, Common I/O | — |
| Level Fader 7 572 | step 7 level/CV fader | Mux I/O 7, Common I/O | — |
| Level Fader 8 572 | step 8 level/CV fader | Mux I/O 8, Common I/O | — |
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Digital Step Controller | digital step controller | Step sequencer, Clock generator, Clock divider / multiplier | Address CV IN, Reset IN, Clock IN | Address Knob, Play Switch, Speed Div/Mult encoder, CV range switch | Clock Out, EOC Out | 572 |
| Gate Generator | gate generator | Gate / trigger processor | Gate Mode IN | Gate Mode Knob | Gate Out 1, Gate Out 2, Gate Out 3, Gate Out 4, Gate Out 5, Gate Out 6, Gate Out 7, Gate Out 8, All Gates Out | 572 |
| Analog Switch | bidirectional analog switch | Sequential / voltage-controlled switch | All IN, Mux I/O 1, Mux I/O 2, Mux I/O 3, Mux I/O 4, Mux I/O 5, Mux I/O 6, Mux I/O 7, Mux I/O 8 | Level Fader 1, Level Fader 2, Level Fader 3, Level Fader 4, Level Fader 5, Level Fader 6, Level Fader 7, Level Fader 8 | Common I/O | 572 |
Modes 9
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Play | transport | — | Play Switch | 572 |
| Stop | transport | — | Play Switch | 572 |
| One Shot | playback | Play Switch = Down (stopped) | Play Switch down or Reset IN | 572 |
| Internal clock | clock source | — | Clock IN unpatched | 572 |
| External clock | clock source | — | Clock IN patched (auto) | 572 |
| Mux (8 to 1) | switch direction | — | patching | 572 |
| DeMux (1 to 8) | switch direction | — | patching | 572 |
| Sequencer | CV/gate sequencer | — | no signals in switch | 572 |
| Quadratic gate modes | gate mode set | — | power on holding Play down | 572 |
Specs 14
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Sequence | steps | 8 steps | — | 572 |
| Address CV IN | accepted range | 0 to 10 V | Address knob fully CCW | 572 |
| Address CV IN | accepted range | -5 to 5 V | Address knob centre | 572 |
| Address CV IN | accepted range | -10 to 0 V | Address knob fully CW | 572 |
| Address CV IN | accepted range | 0 to 5 V | CV range switch 5V | 572 |
| Gate Mode IN | accepted range | 0 to 10 V | — | 572 |
| Gate Mode IN | usable range | 0 to 5 V | — | 572 |
| Gate Generator | max gates per step | 8 gates | — | 572 |
| Play Switch | hold time, clock run | 3 s | — | 572 |
| Module | width | 16 HP | — | 572 |
| Module | depth | 35 mm | — | 572 |
| Module | +12V current | 50 mA | manual | 572 |
| Module | +12V current | 45 mA | product page | 573 |
| Module | -12V current | 5 mA | — | 572 |
Properties 13
| Subject | Property | Value | Source |
|---|---|---|---|
| Analog Switch | direction | bidirectional | 572 |
| Analog Switch | signal types | analog or digital | 572 |
| Analog Switch | channels | 8 | 572 |
| Address | step sum | knob plus CV | 572 |
| Address | timing | synchronous to clock | 572 |
| Digital Step Controller | clock dividers/multipliers | two (in and out) | 572 |
| Clock IN | sync edge | falling edge | 572 |
| Clock Out | ratio | integer div/mult | 572 |
| Tempo | storage | nonvolatile memory | 572 |
| Tap tempo | multiple taps | averaged | 572 |
| All Gates Out | combination | digital sum | 572 |
| Level Faders | signal direction | Mux I/Os to Common | 572 |
| Gate Mode IN | combination | knob attenuates CV | 572 |
Behavior 28
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Address | knob+CV at 0V/Run | plays steps 1 to 8 | — | 572 |
| Address | sum not zero | jumps to relative step | — | 572 |
| Address | value changes | waits for next clock | — | 572 |
| Address | sequence stopped | no effect | — | 572 |
| Address CV IN | voltage outside range | ignored | — | 572 |
| Play Switch down | during playback | reset to step 1 | — | 572 |
| Play Switch down | during stop | one shot to step 8 | — | 572 |
| Play Switch down | before one shot | resets count to step 1 | — | 572 |
| Reset IN | trigger during play | reset to step 1 | — | 572 |
| Reset IN | trigger during stop | one shot, stop at 8 | — | 572 |
| Reset IN | second trigger before end | reset to step one | One Shot | 572 |
| Clock IN | cable plugged | switches to external clock | — | 572 |
| Clock IN | cable plugged | Div/Mult reset to 1/1 | — | 572 |
| Clock Out | default | runs only while playing | — | 572 |
| Clock Out | Play up held 3 s | keeps running when stopped | — | 572 |
| Gate Mode | knob or CV changes | applies on next step | — | 572 |
| Gate Mode IN | unpatched | knob is manual control | — | 572 |
| Gate Mode IN | CV present | knob attenuates CV | — | 572 |
| Gate Mode IN | voltage outside range | ignored | — | 572 |
| EOC Out | count ends step 8 | short trigger | Play | 572 |
| EOC Out | step 8 via Address | no trigger | — | 572 |
| EOC Out | not playing | no trigger | — | 572 |
| Common I/O | All IN, Mux I/Os unpatched | acts as CV out | — | 572 |
| All IN | patched | feeds unpatched Mux I/Os | — | 572 |
| Mux I/O | patched | overrides All IN | — | 572 |
| Speed Div/Mult encoder | more than two taps | intervals averaged | — | 572 |
| Com I/O CV range | long Play Switch hold | changes range drastically | — | 572 |
| Com I/O CV range | short Play Switch press | small increments | — | 572 |
Functions 7
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Sequential / Voltage Switch | block | patchable | block Analog Switch: bidirectional 8-to-1 mux/demux | 572 |
| Step Sequencer | documented use | patchable | documented: 8 step Gate/CV sequencer via Common I/O | 572 |
| Trigger / Euclidean Sequencer | block | patchable | block Gate Generator: per-step Gate Outs, retriggers | 572 |
| Clock Divider / Multiplier | block | patchable | block Digital Step Controller: clock in/out div/mult | 572 |
| Tempo / Clock Sync | jack | patchable | jack Clock IN: syncs to external clock; tap tempo | 572 |
| Master Clock | jack | patchable | jack Clock Out: internal tap-tempo clock out | 572 |
| End-of-Cycle / End-of-Rise Output | jack | patchable | jack EOC Out: trigger at end of step 8 | 572 |
Power
| +12 V | 50 mA |
|---|---|
| −12 V | 5 mA |
| +5 V | — |
| Width | 16 HP |
| Depth | 35 mm |
Other Trigger / Euclidean Sequencer modules
Sources 2
-
[572]
Muxlicer User Manual ↗manual · primary⚠ verified 2026-05-20 · the manufacturer changed this document since
-
[573]
Befaco Muxlicer product page ↗product page⚠ verified 2026-05-20 · the manufacturer changed this document since