bastl-instruments/kompas
Bastl Instruments Kompas Trigger / Euclidean Sequencer
5 HP trigger / euclidean sequencer by Bastl Instruments: 5 inputs, 3 outputs, 5 controls.
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| clock input 735 | global step clock clock | — | → Longitude, Altitude, Latitude |
| reset input 736 | global reset trigger, gate | — | → Longitude, Altitude, Latitude |
| Longitude CV input 735 | coordinate probability CV cv | 0 to 5 V, unipolar | → Longitude |
| Altitude CV input 735 | coordinate probability CV cv | 0 to 5 V, unipolar | → Altitude |
| Latitude CV input 735 | coordinate probability CV cv | 0 to 5 V, unipolar | → Latitude |
The documents don't state: voltage (clock input, reset input); threshold, coupling, impedance (all inputs).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Longitude trigger output 735 | active step trigger trigger | 0 to 5 V pulse 5 ms | from Longitude |
| Altitude trigger output 735 | active step trigger trigger | 0 to 5 V pulse 5 ms | from Altitude |
| Latitude trigger output 735 | active step trigger trigger | 0 to 5 V pulse 5 ms | from Latitude |
The documents don't state: impedance (all outputs).
Controls 5
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Longitude 735 | probability amount knob | Longitude |
|
| Altitude 735 | probability amount knob | Altitude |
|
| Latitude 735 | probability amount knob | Latitude |
|
| LED jumpers 735 | enable left LEDs jumper | Longitude, Altitude, Latitude | — |
| boot jumper 735 | enter boot settings jumper | trigger outputs | — |
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Longitude | 32 step pattern generator | Euclidean / algorithmic pattern generator | clock input, reset input, Longitude CV input | Longitude | Longitude trigger output | 735 |
| Altitude | 32 step pattern generator | Euclidean / algorithmic pattern generator | clock input, reset input, Altitude CV input | Altitude | Altitude trigger output | 735 |
| Latitude | 32 step pattern generator | Euclidean / algorithmic pattern generator | clock input, reset input, Latitude CV input | Latitude | Latitude trigger output | 735 |
Specs 8
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| pattern generators | length | 32 steps | — | 736 |
| trigger outputs | length | 5 ms | default | 736 |
| trigger outputs | selectable length | 2 to 10 ms | boot settings 2/5/10 | 736 |
| clock input | max rate | 60 Hz | — | 736 |
| clock input | max rate | 3600 BPM | — | 736 |
| module | width | 5 HP | — | 736 |
| module | depth | 35 mm | — | 736 |
| module | current +12V | ≤ 30 mA | — | 736 |
Properties 8
| Subject | Property | Value | Source |
|---|---|---|---|
| Longitude | travelling route | safest | 735 |
| Latitude | travelling route | most unpredictable | 735 |
| Altitude | travelling route | related to other two | 735 |
| probability | method | generates new pattern | 735 |
| clock input | scope | global | 735 |
| CV inputs | protection | over-voltage and negative | 735 |
| hardware | platform | ATMEGA328P Arduino-compatible | 736 |
| firmware | license | open source | 736 |
Behavior 7
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| coordinate | knob or CV changes | new pattern generated | — | 735 |
| pattern | after generation | loops until next change | — | 735 |
| clock input | pulse received | advance step, update coordinates | — | 735 |
| coordinate knob | with CV patched | acts as offset | — | 735 |
| trigger output | current step active | trigger and LED | — | 735 |
| alert LED | coordinate changes | lights | — | 735 |
| CV inputs | above 5V or negative | protected from damage | — | 735 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Trigger / Euclidean Sequencer | block | patchable | 3 x 32 step pattern generators, trigger outs | 736 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 0 mA |
| +5 V | — |
| Width | 5 HP |
| Depth | 35 mm |
Other Trigger / Euclidean Sequencer modules
Sources 2
- [735]
-
[736]
Bastl Kompas product page ↗product page⚠ verified 2026-05-22 · the manufacturer changed this document since