alm-busy-circuits/pamelas-new-workout

ALM Busy Circuits Pamela's NEW Workout Trigger / Euclidean Sequencer · Quantizer

8 HP trigger / euclidean sequencer and quantizer by ALM Busy Circuits: 4 inputs, 8 outputs, 28 controls, 10 modes.

ALM Busy Circuits · ALM-017 'Pamela's NEW Workout' Operation Manual v0.7 (firmware 206) (PDF) ↗

Master Clock · Tempo / Clock Sync · Clock Divider / Multiplier · LFO · Random / Sample & Hold CV · Euclidean rhythm · Probability / Bernoulli Gate · Quantizer · Logic Gates · Trigger / Euclidean Sequencer

Inputs 4

Inputs
JackWhat it doesRangeConnections
Clk 1073external clock input
clock
threshold 0.7 V
→ BPM master clock
Run 1073run or reset
gate, trigger
threshold 0.7 V
→ BPM master clock
In 5 modes
  • Run (default): external clock run/stop → BPM master clock
  • Reset (RS): reset all outputs → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Load Sequenced Bank (LD): load next/previous bank → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Rotate Outputs (RA/RR): rotate outputs → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Load CV Bank (LC): load bank by CV 1 → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
CV 1 1073assignable CV
cv
0 to 5 V, unipolar
→ Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
In 4 modes
  • PPQN set to CV: tempo control → BPM master clock
  • Load CV Bank (LC): bank number → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Load Sequenced Bank (LD): load direction → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Rotate Outputs (RA/RR): rotation direction → Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
CV 2 1073assignable CV
cv
-5 to 5 V, bipolar
→ Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8

The documents don't state: voltage (Clk, Run); impedance (all inputs).

Outputs 8

Outputs
JackWhat it doesRangeConnections
Out 1 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 1, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 2 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 2, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 3 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 3, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 4 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 4, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 5 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 5, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 6 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 6, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 7 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 7, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs
Out 8 1073clocked voltage output
clock, gate, trigger, cv
0 to 5 V, unipolar
from Output 8, BPM master clock
In 8 modes
  • Gate: gated clock
  • Triangle: triangle, skew by Width
  • Sine: sine, skew by Width
  • Envelope: envelope, release by Width
  • Random: random level
  • Smooth Random: smoothed random level
  • Quant on: quantized 1V/oct value
  • Logic on: AND/OR/XOR of two outputs

The documents don't state: pulse, impedance (all outputs).

Controls 28

Controls
ControlWhat it doesAffectsPositions
Program Knob 1073encoder: select / edit
knob
BPM master clock, Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • twist: cycle screens/values
  • click: select / deselect
  • push + hold ~1s: extended parameters / sub menu
Start/Stop 1073start / stop clock
button
BPM master clock
  • press: start or stop clock
  • held knob + press: toggle output mute
BPM 1073clock tempo
menu setting · 10 to 300 BPM
BPM master clock—
PPQN 1073external clock PPQN
menu setting · 1 to 48 PPQN
Clk
  • CV: CV 1 sets tempo
Run? 1073Run input starts clock
menu setting
Run
  • Y: Run starts clock
  • N: auto start on clock
Run action 1073Run input action
menu setting
Run
  • Run: external run state
  • RS: reset outputs
  • LD: load sequenced bank
  • RA: rotate all outputs
  • RR: rotate top row
  • LC: load CV bank
Modifier 1073clock multiply / divide
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • on: constant gate
  • off: constant off
  • start pulse: single pulse at start
  • stop pulse: single pulse at stop
Wave 1073output waveform
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • Gate: waveform
  • Triangle: waveform
  • Sine: waveform
  • Envelope: waveform
  • Random: waveform
  • Smooth Random: waveform
Level 1073output level
menu setting · 0 to 100 %
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Offset 1073vertical offset
menu setting · 0 to 100 %
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Width 1073width / skew
menu setting · 0 to 100 %
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
In 6 modes
  • Gate: non-zero step percentage
  • Triangle: skew; 100% saw
  • Sine: skew
  • Envelope: release time
  • Random: no effect
  • Smooth Random: sharp to rounded peaks
Phase 1073waveform start point
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Delay 1073step delay
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Dly 1073delay divisor
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • 1: delay every step
  • 2: every other step; swing
Slop 1073timing error likelihood
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
EStep 1073Euclidean step count
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Euclidean triggers 1073Euclidean hit count
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
ERot 1073Euclidean rotation
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
RSkip 1073random step skip
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Loop 1073beat based loop
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • 0: re-seeds random generator
Quant 1073scale quantisation
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • NO: no quantisation
  • MA: Major
  • mi: Minor
  • Hm: Harmonic Minor
  • PM: Pentatonic Major
  • Pm: Pentatonic Minor
  • Ly: Lydian
  • Ph: Phrygian
  • Jp: Japanese
  • C5: VI Chord
  • C4: IV Chord
  • Ch: 12 tone chromatic
Logic 1073combine with channel
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8
  • NO: no logic
  • &: AND
  • +: OR
  • ^: XOR
Mute 1073mute output
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Save 1073save to bank
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Load 1073load from bank
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
Reset 1073reset output parameters
menu setting
Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8—
CV Atten 1073per-parameter CV attenuation
menu setting · bipolar
CV 1, CV 2—
CV Offset 1073per-parameter CV offset
menu setting
CV 1, CV 2—

Blocks 10

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
BPM master clockBPM based clockClock generatorClk, Run, CV 1Program Knob, Start/Stop, BPM, PPQN, Run?Out 1, Out 2, Out 3, Out 4, Out 5, Out 6, Out 7, Out 81073
Output 1clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 11073
Output 2clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 21073
Output 3clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 31073
Output 4clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 41073
Output 5clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 51073
Output 6clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 61073
Output 7clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 71073
Output 8clocked voltage outputClock divider / multiplier, LFO, Envelope generator, Random / chaos source, Euclidean / algorithmic pattern generator, Quantizer, Logic, Sample & holdCV 1, CV 2Modifier, Wave, Level, Offset, Width, Phase, Delay, Dly, Slop, EStep, Euclidean triggers, ERot, RSkip, Loop, Quant, Logic, Mute, Save, Load, ResetOut 81073
expander header5 pin headerExpander———1073

Modes 10

Modes
ModeKindSelected bySelection methodSource
Run: RunRun input actionRun action = Runexternal clock sub menu1073
Run: ResetRun input actionRun action = RSexternal clock sub menu1073
Run: Load Sequenced BankRun input actionRun action = LDexternal clock sub menu1073
Run: Rotate OutputsRun input actionRun action = RAexternal clock sub menu1073
Run: Rotate top rowRun input actionRun action = RRexternal clock sub menu1073
Run: Load CV BankRun input actionRun action = LCexternal clock sub menu1073
external clock syncclock sourcePPQN = 1-48clock sub menu1073
CV tempoclock sourcePPQN = CVclock sub menu1073
extended parametersedit screen—push + hold knob ~1s1073
service modecalibration / service—hold knob at power-up1073

Hidden functions 7

Hidden functions
FunctionTriggerAffectsSource
extended output parameterspush + hold knob on outputOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 81073
external clock sub menupush + hold knob on BPMBPM master clock1073
all outputs load/save/resetlong hold knob on BPMOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 81073
CV attenuation / offsetpush + hold on CV optionCV 1, CV 21073
quick mute togglehold knob + Start/StopOutput 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 81073
service modehold knob while poweringBPM master clock1073
fast modifier changepush + hold while twistingModifier1075

Specs 31

Specs
SubjectQuantityValueConditionSource
BPM master clocktempo range10 to 300 BPM—1073
Modifiermax division512 divisor—1073
Modifiermax multiplication48 multiplier—1073
Pexp-1gate outputs4 count—1073
Clkexternal clock resolution1 to 48 PPQN—1073
Clkdefault PPQN24 PPQN—1073
outputsresolution10 bits—1073
outputsmax update frequency500 Hz—1073
outputscount8 count—1073
Levelrange0 to 100 %—1073
Offsetrange0 to 100 %—1073
Quantrange5 octaves—1073
Quantresolution10 bits—1073
bankssave banks26 counta-z, 8 slots each1073
bankssave banks200 count—1074
Load CV Bankaddressable banks16 count—1073
Run actionCV 1 high threshold2 V—1073
extended parametershold time1 s—1073
service modeclock calibration default50 value—1073
service modeclock calibration range0 to 100 value—1075
module+12V current50 mA—1073
module-12V current0.5 mA—1073
module-12V current5 mA—1074
modulewidth8 HP—1073
moduledepth22 mm—1073
moduledepth32 mm—1074
Pexp-1width4 HP—1073
Pexp-1+12V current increase25 mA—1073
Pexp-2width2 HP—1073
Pexp-2clock output24 PPQN—1073
OLEDscreensaver timeout15 minfirmware 198+1075

Properties 17

Properties
SubjectPropertyValueSource
outputsbufferingbuffered low impedance1073
Offsetover 5Vclipped1073
waveformcycle lengthone step1073
Modifiernon-integer valuestriplet / dotted1073
CV inputsassignmentany parameter, shared1073
CV Attennegative valueinverts CV1073
CV 20V50%1073
output settingspower cyclesaved automatically1073
random seedsavedyes1073
expanderssimultaneousone only1073
Pexp-1outputsDIN Sync, MIDI, gates1073
Pexp-1gate ratiosx1, x4, x2, /41073
Pexp-2outputsMIDI, x24 clock, run1073
clockcalibration (rev 063+)fixed, crystal1073
firmware updatemethodUSB dfu-util1073
modulereverse power protectionyes1073
Quantrandom with skipsample and hold1073

Behavior 36

Behavior rules
SubjectWhenEffectModeSource
extended parametersutility modifier selectednot available—1073
Offsetoutput exceeds 5Vclipped at 5V—1073
DelayDly divisor unsetno effect—1073
Delaysetend of cycle clipped—1073
Dlydivisor 2swing effect—1073
Euclidean triggerssetmust be below steps—1073
Loopset to zerore-seeds random generator—1073
Quant randomempty pattern stepsheld, not 0V—1073
WidthRandom waveformno effect—1073
WidthTriangle at 100%saw—1073
Logic ANDother channel highfast clock passes—1073
Muteoutput mutedstill editable—1073
Saveclock runningtiming errors possible—1073
CV inputsoutside rangeignored, safe—1073
CV 1negative voltagenot responded to—1073
Rundefaultexternal run/stop—1073
Runnon-run action setclock state auto-detected—1073
Run actionstrigger, clock runningaction performed—1073
Load Sequenced BankCV 1 lownext bank—1073
Load Sequenced BankCV 1 high (>2V)previous bank—1073
Rotate OutputsCV 1 lowanti-clockwise—1073
Rotate OutputsCV 1 highclockwise—1073
Run?YRun input starts clock—1073
Run?Nauto start on clock—1073
external syncBPM shows 10PPQN likely too high—1073
external clocktempo unstablewarning displayed—1073
PPQNset to CVCV 1 controls tempo—1073
power-updefaultdisplay shows BPM—1073
service modeStart pressedexits, normal start—1073
clock calibrationrev 063 or laterfixed at 0—1073
firmware updateperformedsaved outputs likely cleared—1073
firmware updatein progressdisplay blank—1073
Modifierstart pulse typefires once at start—1073
Modifierstop pulse typefires once at stop—1073
Resetfull resetmute states reset—1075
OLEDno interactionscreensaver dims display—1075

Functions 10

Function tags
FunctionBasisScopeEvidenceSource
Master Clockblockpatchableblock BPM master clock: BPM based clock1073
Tempo / Clock Syncjackpatchablejack Clk: external clock input (1-48 PPQN)1073
Clock Divider / Multipliercontrolpatchablecontrol Modifier: clock multiply / divide per output1073
LFOmodepatchablecontrol Wave modes Triangle / Sine on each output1073
Random / Sample & Hold CVmodepatchablecontrol Wave modes Random / Smooth Random on each output1073
Euclidean rhythmcontrolpatchablecontrols EStep / Euclidean triggers / ERot: Euclidean pattern per output1073
Probability / Bernoulli Gatecontrolinternalcontrol RSkip: percentage likelihood of a step being skipped1073
Quantizercontrolinternalcontrol Quant: quantises the output's own value to a scale1073
Logic Gatescontrolinternalcontrol Logic: AND / OR / XOR with another output1073
Trigger / Euclidean Sequencercontrolpatchablecontrols RSkip + loop / Euclidean step skipping on Gate outputs: 'Euclidean and random step skipping with beat based looping for rhythm creation'1073

Power

+12 V50 mA
−12 V0.5 mA
+5 V—
Width8 HP
Depth22 mm

Other Trigger / Euclidean Sequencer modules

All Trigger / Euclidean Sequencer modules →

Firmware 13

VersionReleasedNotes
207—Tweaked logic handling to avoid potential short ghost triggers caused by logic operation ordering.1075
206—Fixed a minor rendering issue where the step-up output type was incorrectly displayed.1075
205—Added Smooth Random waveform type and Logic parameter (AND/OR/XOR channel combining); fixed a small output blip when rotating outputs.1075
204—Added sample-and-hold behavior to quantised random waveform when rhythmic patterns (RSkip, Euclidean) are applied; updated manual.1075
2032020-04Renamed scale notation; added Phrygian scale; fixed special modifier types (On/Off/Steps) not saving correctly.1075
2022020-04Added QUANT quantizer with basic scales and CV bank-select run type; fixed PPQN screen, CV random seed reset, spurious CV modifier assignment, and mute state not resetting on full reset.1075
2012018-11Added improved BPM representation for Rev 063 hardware (Rev 063 no longer requires clock calibration); no functional change on Rev 062 hardware.1075
2002018-06Ver 199 updated to support Rev 062 hardware with a different DAC chip; functionality identical to 199. Only for Rev 062 units — will not work on older hardware.1075
1992018-01-16Fixed stopped-BPM lag, improved random seed distribution across outputs, fixed expander sync with external clock slaving, and fixed phase offset at output start.1075
1982017-10-25Fixed output end-pulse type not firing, CV looping bug, bank-load direction (next instead of prev when CV1 low), external clock compatibility with new run options, and extended screensaver timeout to 15 minutes.1075
1972017-09-14Improved voltage control of tempo; added single-row (upper 4 outputs) rotation mode; various bug fixes and tweaks to run input and rotation.1075
189—Added output muting and vertical offset parameter; improved expander MIDI sync compatibility; increased CV precision; fixed CV2 attenuversion; fixed bank sync across power cycles and expander run signal; fixed Euclidean reset; allowed utility modifier outputs to be saved and recalled.1075
177—Original release firmware.1075

Sources 3

  1. [1073]
  2. [1074]
    ALM Pamela's NEW Workout product page ↗product page
    ⚠ verified 2026-06-02 · the manufacturer changed this document since
  3. [1075]
    ALM-017 Firmware History (ChangeLog.txt) ↗firmware notes
    ● verified 2026-06-02