clank/chaos

CLANK Chaos Step Sequencer · Trigger / Euclidean Sequencer

12 HP step sequencer and trigger / euclidean sequencer by CLANK: 4 inputs, 13 outputs, 10 controls, 9 modes.

CLANK · Chaos User Manual v1.17b (PDF) ↗

Random / Sample & Hold CV · Step Sequencer · Trigger / Euclidean Sequencer · Master Clock · Clock Divider / Multiplier · Tempo / Clock Sync · Quantizer · Slew Limiter · Probability / Bernoulli Gate · CV Recorder / Gesture Looper

Inputs 4

Inputs
JackWhat it doesRangeConnections
Clock in 949external clock input
gate, trigger, clock
—
→ master clock
Loop in 949loop start/stop or reset
gate, trigger
0 to 10 V
→ loop
In 2 modes
  • Loop in green: toggles loop on/off → loop
  • Loop in red: external loop reset → loop
CV in 949external CV input
cv
0 to 8 V, unipolar
→ random voltage generators
In 3 modes
  • CV IN green: sample & hold source → random voltage generators
  • CV IN red: ground transpose CV → Ground transpose
  • CV IN orange: saved slot recall → save/recall
Chaos in 949Chaos function trigger
gate, trigger
—
→ Chaos function

The documents don't state: voltage (Clock in, Chaos in); scaling (CV in); threshold, impedance (all inputs).

Outputs 13

Outputs
JackWhat it doesRangeConnections
Clock out 949master clock output
gate, clock
0 to 8 V
from master clock
Ch. Gate out 1 950channel 1 gate
gate, trigger
0 to 8 V
from Channel 1
Ch. Gate out 2 950channel 2 gate
gate, trigger
0 to 8 V
from Channel 2
Ch. Gate out 3 950channel 3 gate
gate, trigger
0 to 8 V
from Channel 3
Ch. Gate out 4 950channel 4 gate
gate, trigger
0 to 8 V
from Channel 4
Ch. Gate out 5 950channel 5 gate
gate, trigger
0 to 8 V
from Channel 5
Ch. Gate out 6 950channel 6 gate
gate, trigger
0 to 8 V
from Channel 6
Ch. CV out 1 951channel 1 CV
cv, pitch
0 to 8 V, unipolar
from Channel 1
Ch. CV out 2 951channel 2 CV
cv, pitch
0 to 8 V, unipolar
from Channel 2
Ch. CV out 3 951channel 3 CV
cv, pitch
0 to 8 V, unipolar
from Channel 3
Ch. CV out 4 951channel 4 CV
cv, pitch
0 to 8 V, unipolar
from Channel 4
Ch. CV out 5 951channel 5 CV
cv, pitch
0 to 8 V, unipolar
from Channel 5
Ch. CV out 6 951channel 6 CV
cv, pitch
0 to 8 V, unipolar
from Channel 6

The documents don't state: scaling, impedance (all outputs).

Controls 10

Controls
ControlWhat it doesAffectsPositions
encoder 951channel select, value edit
other
all parameters
In 1 mode
  • Edit Mode: select step to edit → sequencer
Probability 949gate probability modifier
button · 0 to 100 %
channel gate—
Width 949gate width modifier
button · 1 to 100 %
channel gate—
Time 949clock mult/div or ms
button
channel timing
In 3 modes
  • synced: master clock mult/div → master clock
  • unsynced: ms between gates → channel timing
  • Edit Mode: step duration → sequencer
Voltage window 949CV range upper limit
button
random voltage generators
In 1 mode
  • Edit Mode: note deviation → sequencer
Ground transpose 949CV range lower limit
button
random voltage generators
In 1 mode
  • Edit Mode: step note/voltage → sequencer
loop button 951channel loop on/off
button
loop—
input assign button 951input links per channel
button
Clock in, Loop in, CV in, Chaos in—
quant / slew button 951slew and scale select
button
slew, quantizer—
save & recall button 951memory save/recall
button
save/recall—

Blocks 14

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
master clockmaster clockClock generatorClock inTimeClock out949
Channel 1gate and voltage channelRandom / chaos source, Sample & hold, Clock divider / multiplier, Gate / trigger processorCV in, Loop in, Chaos inProbability, Width, Time, Voltage window, Ground transposeCh. Gate out 1, Ch. CV out 1949
Channel 2gate and voltage channelRandom / chaos source, Sample & hold, Clock divider / multiplier, Gate / trigger processorCV in, Loop in, Chaos inProbability, Width, Time, Voltage window, Ground transposeCh. Gate out 2, Ch. CV out 2949
Channel 3gate and voltage channelRandom / chaos source, Sample & hold, Clock divider / multiplier, Gate / trigger processorCV in, Loop in, Chaos inProbability, Width, Time, Voltage window, Ground transposeCh. Gate out 3, Ch. CV out 3949
Channel 4gate and voltage channelRandom / chaos source, Sample & hold, Clock divider / multiplier, Gate / trigger processorCV in, Loop in, Chaos inProbability, Width, Time, Voltage window, Ground transposeCh. Gate out 4, Ch. CV out 4949
Channel 5gate and voltage channelRandom / chaos source, Sample & hold, Clock divider / multiplier, Gate / trigger processorCV in, Loop in, Chaos inProbability, Width, Time, Voltage window, Ground transposeCh. Gate out 5, Ch. CV out 5949
Channel 6gate and voltage channelRandom / chaos source, Sample & hold, Clock divider / multiplier, Gate / trigger processorCV in, Loop in, Chaos inProbability, Width, Time, Voltage window, Ground transposeCh. Gate out 6, Ch. CV out 6949
random voltage generatorsrandom voltage generatorRandom / chaos sourceCV inVoltage window, Ground transpose—949
quantizerscale quantizationQuantizer—quant / slew button—949
slewslew limitingSlew limiter / lag—quant / slew button—949
loopchannel loopingStep sequencerLoop inloop button—949
sequencerEdit Mode sequencerStep sequencer—encoder—949
Chaos functionparameter randomizerRandom / chaos sourceChaos inencoder—949
save/recall10 memory slots—CV insave & recall button—949

Modes 9

Modes
ModeKindSelected bySelection methodSource
random modedefault generation—default949
loop modechannel looploop button = presspress loop button or Loop in gate949
Edit Modestep sequencer—press encoder while looped949
syncedchannel timing—input assign: clock LED green949
unsyncedchannel timing—input assign: clock LED white949
CV IN sample & holdCV in mode—input assign third LED green949
CV IN transposeCV in mode—input assign third LED red949
CV IN slot recallglobal CV in mode—hold encoder until orange949
calibrationmaintenance—hold encoder at power-up949

Hidden functions 19

Hidden functions
FunctionTriggerAffectsSource
Rachetingtap and hold Widthchannel gate949
Swingtap and hold Timechannel timing949
Tap tempotap Time when unsyncedchannel timing949
Channel run/stopdouble tap Input assignchannels949
Channel resetdouble tap Memory accesschannel settings949
Loop modifiers resethold loop, double tap Memoryloop949
Copy & pastetap Memory access, select, tapchannel settings949
Slew amounttap and hold quant/slewslew949
Scale selecthold quant/slew, turn encoderquantizer949
Root notehold quant/slew, hold encoderquantizer949
Loop lengthhold loop, turn encoderloop949
Loop directionhold loop, press buttonloop949
Loop counter resethold loop, press quant/slewloop949
Chaos functionpress encoderall modifiers949
Channel entropyhold and rotate encoderChaos function949
Modifier entropyhold modifier and encoderChaos function949
Clear slotpress Probability in save menusave/recall949
Time units lengthloop + time togethersequencer949
EEPROM eraseProbability during calibrationsave/recall949

Specs 31

Specs
SubjectQuantityValueConditionSource
master clockperiod range10 to 10000 ms—949
unsynced timedefault period500 msunsynced949
unsynced timedefault tempo120 BPMunsynced949
gatesmax rate approx100 Hz—949
gatesslowest rate5.5 min—949
Probabilityrange0 to 100 %—949
Widthrange1 to 100 %—949
Timemult/div range1 to 8 ratiosynced949
Timeextended mult/div16 to 32 ratiosynced949
TimeLED step, first window100 msunsynced949
TimeLED step, second window1 sunsynced949
Rachetingrange1 to 8 ratio—949
Swingmax offset0 to 0.75 fraction of clock—949
random voltagerange0 to 8 V—949
value barper LED1 V—949
slewamount≤ 100 % of step—949
looplength1 to 32 steps—949
save/recallslots10 slots—949
CV in slot recallCV range0 to 5 Vslot recall mode949
CV in slot recallstep per slot0.5 Vslot recall mode949
Root notestep per detent1 semitones—949
Ground transposestep per detent1 semitonesquantized949
quantizerscales, first set10 scales—949
quantizerscales, second set7 scales—949
quantizerscales, third set7 scales—949
calibrationreference output8 V—949
modulewidth12 HP—949
power+12 V current115 mA—949
power-12 V current0 mA—949
power+5 V current0 mA—949
operating temperaturerange0 to 50 °C—949

Properties 12

Properties
SubjectPropertyValueSource
enginedomaindigital949
channelscount6949
Probabilityzero settingmutes channel949
quantizerreference noteC949
quantizersecond setmelodic major modes949
quantizerthird setmelodic minor modes949
CV in slot recallscopeglobal949
loophistory keptlast 32 steps949
Edit Modefollowing behaviourno949
savecontentsall channels, loops949
CV outscalibrationfactory calibrated949
Swingvalues0, 1/4, 2/4, 3/4949

Behavior 27

Behavior rules
SubjectWhenEffectModeSource
Channel 1Clock in unpatchedacts as master clock—949
master clockexternal clock stopsChaos stops—949
Ch1 probabilityCh1 is master clockmaster stream unaffected—949
Probabilityset to 0%channel muted / pause—949
Widthracheting appliedgate length halved—949
Channel 1muted while masterwhole system stops—949
channelgate risesnew random CV—949
slewingCV IN sample modenot applied—949
modifiersCV IN sample modework as random—949
loop parameterschanged before loopingrecorded and played back—949
loop probabilityin loop modecapped at original value—949
loop voltage windowin loop modecan only decrease—949
original parameterschanged in loop modeloop values unaffected—949
Loop ininput assign LED greengate toggles loop—949
Loop ininput assign LED redgate restarts loop—949
Chaos inchannel linkedgate randomizes modifiers—949
modifier entropyset individuallyoverrides channel entropy—949
Edit Modeloop length increasednew steps clone last—949
Edit Modeloop length decreasedsteps erased—949
Ratchetswithin one stepvoltage unchanged—949
CV in slot recallactiveoverrides other channels CV IN—949
startupsaved slots presentlast slot recalled—949
recallempty slotno effect—949
pasteafter each pastememory buffer erased—949
channel resetall channels selectedall channels reset—949
firmware v1.0 to v1.1upgradingEEPROM erase mandatory—949
Edit Modeenteredchannel must be looped—949

Functions 10

Function tags
FunctionBasisScopeEvidenceSource
Random / Sample & Hold CVblockpatchableblock: six random voltage generators on CV outs949
Step SequencermodepatchableEdit Mode: per-step 32-step sequencer949
Trigger / Euclidean Sequencerjackpatchablejacks Ch. Gate out 1-6, gate pattern generator951
Master Clockblockpatchableblock: master clock, Clock out jack949
Clock Divider / MultipliercontrolpatchableTime: mult/div of master clock per channel949
Tempo / Clock Synccontrolpatchablechannels synced to external Clock in; tap tempo949
Quantizerblockpatchableblock: scale quantization on CV outs incl. CV in949
Slew Limitercontrolpatchablequant/slew: adjustable slew per channel949
Probability / Bernoulli GatecontrolpatchableProbability modifier per gate channel949
CV Recorder / Gesture Looperdocumented usepatchabledocumented: use as voltage recorder; CV in S&H + loop949

Power

+12 V115 mA
−12 V0 mA
+5 V0 mA
Width12 HP
Depth—

Other Step Sequencer modules

All Step Sequencer modules →

Firmware 2

VersionReleasedNotes
1.17—Added external loop reset via gate input and a full step sequencer (Edit) mode allowing per-step editing of all parameters on looped sequences.949
1.16—Added channel settings clear, copy & paste, run/stop per channel, time swing, tap tempo, ratcheting, adjustable slew limiting, CV IN transpose, two new quantizer scale sets, root note selection, loop direction, loop counter reset, 1–32 loop step selection, independent entropy per modifier, and last-saved slot recall at startup.949

Sources 3

  1. [949]
    CLANK Chaos User Manual v1.17b ↗manual · primary
    ● verified 2026-05-24
  2. [950]
    CLANK Chaos Quickstart v1.1 ↗manual
    ● verified 2026-05-24
  3. [951]
    CLANK Chaos product page ↗product page
    ⚠ verified 2026-05-24 · the manufacturer changed this document since