4ms/rotating-clock-divider

4ms Rotating Clock Divider Clock Divider / Multiplier

4 HP clock divider / multiplier by 4ms: 3 inputs, 8 outputs, 8 controls, 5 modes.

4ms · Rotating Clock Divider manual (PDF) ↗

Clock Divider / Multiplier

Inputs 3

Inputs
JackWhat it doesRangeConnections
Clock Input 1360clock to divide
clock
3.5 to 15 V
audio rate yes
normalled from Bus Clock (BUS CLK jumper)
→ Clock divider
CV Rotate 1360rotates divide-by amounts
cv
0 to 5 V, unipolar
→ Clock divider
CV Reset 1360resets all counters
trigger
3.5 to 15 V
threshold 3.5 V
→ Clock divider

The documents don't state: polarity (Clock Input, CV Reset); scaling, audio rate (CV Rotate); threshold (Clock Input); coupling, impedance (all inputs).

Outputs 8

Outputs
JackWhat it doesRangeConnections
Divide-by (1+R) 1360divide-by 1 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (2+R) 1360divide-by 2 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (3+R) 1360divide-by 3 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (4+R) 1360divide-by 4 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (5+R) 1360divide-by 5 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (6+R) 1360divide-by 6 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (7+R) 1360divide-by 7 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle
Divide-by (8+R) 1360divide-by 8 plus rotation
clock, trigger, gate
—
from Clock divider
In 2 modes
  • Trigger: pulse width = input
  • Gate: 50% duty cycle

The documents don't state: voltage, polarity, pulse, coupling, impedance (all outputs).

Controls 8

Controls
ControlWhat it doesAffectsPositions
Up/Down Mode 1360count direction
jumper
Clock divider
  • on: down-beat counting
  • off: up-beat counting
Trig/Gate Mode 1360output pulse type
jumper
Divide-by (1+R), Divide-by (2+R), Divide-by (3+R), Divide-by (4+R), Divide-by (5+R), Divide-by (6+R), Divide-by (7+R), Divide-by (8+R)
  • on: gate outputs
  • off: trigger outputs
Auto-Reset Jumper 1360auto-reset enable
jumper
Clock divider
  • on: reset at 2x max-div
  • off: no auto-reset
Max-Divide Range Jumpers 1360max divide-by range
jumper
Clock divider
  • 16 on, 32 on: 1 to 8
  • 16 on, 32 off: 1 to 16
  • 16 off, 32 on: 1 to 32
  • 16 off, 32 off: 1 to 64
Spread jumper 1360Spread mode
jumper
Clock divider
  • on: divisions spread across range
  • off: consecutive divisions
BUS CLK jumper 1360bus clock enable
jumper
Clock divider, Clock Input
  • both pins: clocked by bus clock
  • one pin/removed: bus clock unused
5V Select 13605V power source
jumper
module
  • INT: +12V via regulator
  • EXT: from +5V rail
LED Dimmer Trimpot 1360LED brightness
other
LEDs—

Blocks 1

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
Clock dividerrotating clock dividerClock divider / multiplier, CounterClock Input, CV Rotate, CV ResetUp/Down Mode, Trig/Gate Mode, Auto-Reset Jumper, Max-Divide Range Jumpers, Spread jumper, BUS CLK jumperDivide-by (1+R), Divide-by (2+R), Divide-by (3+R), Divide-by (4+R), Divide-by (5+R), Divide-by (6+R), Divide-by (7+R), Divide-by (8+R)1360

Modes 5

Modes
ModeKindSelected bySelection methodSource
Up-beat countingcounting modeUp/Down Mode = offjumper1360
Down-beat countingcounting modeUp/Down Mode = onjumper1360
Triggeroutput modeTrig/Gate Mode = offjumper1360
Gateoutput modeTrig/Gate Mode = onjumper1360
Spreaddivision spacingSpread jumper = onjumper1360

Specs 25

Specs
SubjectQuantityValueConditionSource
modulewidth4 HP—1360
modulewidth4 HP—1361
moduledepth35 mm—1361
module+12V current60 mAmaximum (manual)1360
module+12V current33 mA5VSEL INT1361
module+5V current0 mA5VSEL INT1361
module-12V current4 mA5VSEL INT1361
module+12V current19 mA5VSEL EXT1361
module+5V current14 mA5VSEL EXT1361
module-12V current4 mA5VSEL EXT1361
Clock dividerdivide-by range1 to 64 division—1360
Clock Inputmaximum frequency3 kHz—1360
Clock Inputvoltage range3.5 to 15 Vmanual, PCB 1.21360
Clock Inputvoltage range5 to 15 Vproduct page1361
CV Resetvoltage range3.5 to 15 Vmanual, PCB 1.21360
CV Resetvoltage range5 to 15 Vproduct page1361
CV Rotatevoltage range0 to 5 V—1360
CV Rotaterotation range0 to 63 steps—1360
CV Rotatestep threshold0.16 VMax-Div 321360
CV Rotatestep threshold0.07 VMax-Div 641360
Auto-Resetreset count16 clocksMax-Div 81360
Auto-Resetreset count32 clocksMax-Div 161360
Auto-Resetreset count64 clocksMax-Div 321360
Auto-Resetreset count128 clocksMax-Div 641360
LED Dimmer Trimpotfactory default50 %—1360

Properties 8

Properties
SubjectPropertyValueSource
Clock Inputtrigger edgerising edge1360
CV Rotateresponsesome non-linearities1360
Bus clockroleslave only1360
Bus clockbufferingbuffered1360
Spread, Max-Div 8divisions1,2,3,4,6,8,12,161360
Gate modeduty cycle50%1360
5V Selectfactory settingINT1360
BUS CLK jumperfactory settingdisabled (one pin)1360

Behavior 13

Behavior rules
SubjectWhenEffectModeSource
CV Reset3.5V or greaterreset on next clock—1360
CV RotateCV increaseseach output divide-by +1—1360
Outputsrotation exceeds maxwraps around to /1—1360
Trigger modeoutput pulsewidth equals input clock—1360
Gate mode, odd divisionshalf pulseturns off on falling edge—1360
Gate modedown-countinggates inverted—1360
Up-beat countingcounter reaches Njack fires—1360
Down-beat countingcounter is 1jack fires—1360
Auto-Resetdivisor evenly divides resetoutput unaffected—1360
CV ResetAuto-reset enabledindependent of auto-reset—1360
Clock Inputcable patchedoverrides bus clock—1360
5V SelectEXT with noisy 5Vmay glitch—1360
Spread modeMax-Div 8musical divisions only—1360

Functions 1

Function tags
FunctionBasisScopeEvidenceSource
Clock Divider / Multiplierblockpatchable8 outputs divide clock /1 to /641360

Power

+12 V60 mA
−12 V4 mA
+5 V0 mA
Width4 HP
Depth35 mm

Other Clock Divider / Multiplier modules

All Clock Divider / Multiplier modules →

Sources 2

  1. [1360]
    4ms Rotating Clock Divider manual ↗manual · primary
    ● verified 2026-11-16
  2. [1361]
    4ms Rotating Clock Divider product page ↗product page
    ● verified 2026-11-16