4ms/catalyst-controller
4ms Catalyst Controller Manual Controller · CV Recorder / Gesture Looper
20 HP manual controller and CV recorder / gesture looper by 4ms: 3 inputs, 8 outputs, 24 controls, 7 modes.
4ms · Company Catalyst Controller Manual (PDF) ↗
Manual Controller · Crossfader · Slew Limiter · CV Recorder / Gesture Looper · Random / Sample & Hold CV · Clock Divider / Multiplier · Tempo / Clock Sync
Inputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV 804 | pathway position CV cv | 0 to 5 V, unipolar | → Scene Engine, Motion Recorder |
| Trig 804 | record/play trigger, clock trigger, clock | threshold 0.7 V | → Motion Recorder, Clock Divider |
| Reset 804 | not used | — | — |
The documents don't state: voltage (Trig, Reset); impedance (all inputs); normalling (CV).
Outputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Channel 1 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 2 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 3 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 4 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 5 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 6 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 7 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
| Channel 8 Out 804 | channel CV/gate cv, gate | -5 to 10 V | from Scene Engine, Slew, Quantizer In 2 modes
|
The documents don't state: impedance (all outputs).
Controls 24
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Channel 1 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 1 Out, Scene Engine | In 3 modes
|
| Channel 2 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 2 Out, Scene Engine | In 2 modes
|
| Channel 3 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 3 Out, Scene Engine | In 2 modes
|
| Channel 4 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 4 Out, Scene Engine | In 2 modes
|
| Channel 5 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 5 Out, Scene Engine | In 3 modes
|
| Channel 6 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 6 Out, Scene Engine | In 3 modes
|
| Channel 7 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 7 Out, Scene Engine | In 3 modes
|
| Channel 8 Knob 804 | channel output level knob · -5 to 10 V · bipolar | Channel 8 Out, Scene Engine | In 3 modes
|
| Crossfader 804 | pathway position fader | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 1 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 2 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 3 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 4 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 5 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 6 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 7 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Scene 8 804 | scene select button | Scene Engine, Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Shift 804 | secondary functions button | Slew, Clock Divider, Random | — |
| Fine 804 | fine knob adjust button | Channel 1 Knob, Channel 2 Knob, Channel 3 Knob, Channel 4 Knob, Channel 5 Knob, Channel 6 Knob, Channel 7 Knob, Channel 8 Knob | — |
| Morph/Range 804 | morph / range edit button | Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | — |
| Bank/Quantize 804 | bank / quantize select button | Scene Engine, Quantizer | — |
| Add 804 | add/replace scene button | Scene Engine | — |
| Copy 804 | copy/paste scene button | Scene Engine | — |
| Play 804 | motion playback button | Motion Recorder | — |
Blocks 6
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Scene Engine | scene crossfader | Manual controller, Crossfader / panner | CV | Crossfader, Channel 1 Knob, Channel 2 Knob, Channel 3 Knob, Channel 4 Knob, Channel 5 Knob, Channel 6 Knob, Channel 7 Knob, Channel 8 Knob, Scene 1, Scene 2, Scene 3, Scene 4, Scene 5, Scene 6, Scene 7, Scene 8, Add, Bank/Quantize, Morph/Range | Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | 804 |
| Motion Recorder | crossfader/CV recording | — | Trig, CV | Play, Shift | — | 804 |
| Clock Divider | Trig clock divider | Clock divider / multiplier | Trig | Channel 6 Knob, Shift | — | 804 |
| Slew | pathway lag | Slew limiter / lag | — | Channel 7 Knob, Channel 5 Knob, Shift | Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | 804 |
| Quantizer | per-channel scale quantizer | Quantizer | — | Bank/Quantize, Channel 1 Knob, Channel 2 Knob, Channel 3 Knob, Channel 4 Knob, Channel 5 Knob, Channel 6 Knob, Channel 7 Knob, Channel 8 Knob | Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | 804 |
| Random | scene randomization | Random / chaos source | — | Channel 8 Knob, Shift | Channel 1 Out, Channel 2 Out, Channel 3 Out, Channel 4 Out, Channel 5 Out, Channel 6 Out, Channel 7 Out, Channel 8 Out | 804 |
Modes 7
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| CV Mode | channel output mode | — | Bank/Quantize + turn knob | 804 |
| Gate Mode | channel output mode | — | Bank/Quantize + knob to green | 804 |
| Momentary Mode | scene button mode | — | Shift + Channel 1 knob green | 804 |
| Blind Mode | scene button mode | — | Shift + Channel 1 knob red | 804 |
| Latch Mode | scene button mode | — | Shift + Channel 1 knob blue | 804 |
| Classic Bank | bank | — | hold Bank, press Play | 804 |
| Catalyst Sequencer | firmware mode | — | hold Play + Copy + Morph | 804 |
Specs 30
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Channel outputs | output range | -5 to 10 V | — | 804 |
| Channel outputs | limited ranges | not stated (V) | +/-5V, +5V, +3V, +1V | 804 |
| Channel outputs | measured range | -4.95 to 9.95 V | — | 804 |
| Channel outputs | accuracy post-calibration | 0.5 mV | — | 804 |
| Channel outputs | accuracy uncalibrated | 12 mV | — | 804 |
| Channel Knob | step per click | 83.3 mV | without Fine | 804 |
| Channel Knob | step per click | 3.3 mV | with Fine | 804 |
| Channel Knob | step per click | 4 mV | with Fine (manual text) | 804 |
| Channel Knob | step per click | 1 V | Fine + Morph held | 804 |
| Channel outputs | interpolation precision | 0.46 mV | Morph, Glide or Slew | 804 |
| Channel outputs | temperature drift | 2 ppm/°C | — | 804 |
| Channel outputs | update rate | 4 kHz | — | 804 |
| CV | input range | 0 to 5 V | — | 804 |
| CV | accuracy | 1.2 mV | — | 804 |
| Crossfader | resolution | 4096 points | — | 804 |
| Trig | threshold | 0.7 V | — | 804 |
| Gate Mode | pulse width | 2 to 500 ms | — | 804 |
| Pathway | max scenes | 64 scenes | — | 804 |
| Bank | scenes per bank | 8 scenes | — | 804 |
| Module | banks | 9 banks | 8 regular + Classic | 804 |
| Motion Recorder | max length | 10 s | manual | 804 |
| Motion Recorder | max length | 20 s | product page | 805 |
| Slew | max traverse time | 4 minutes | — | 804 |
| Clock Divider | division | 1 to 256 divisions | — | 804 |
| Random | range step per click | 1 semitones | — | 804 |
| Module | custom scale slots | 8 slots | — | 804 |
| Module | +12V current | 60 mA | — | 804 |
| Module | -12V current | 25 mA | — | 804 |
| Module | width | 20 HP | — | 805 |
| Module | depth | 24 mm | — | 805 |
Properties 18
| Subject | Property | Value | Source |
|---|---|---|---|
| Module | output channels | 8 | 804 |
| Channels | default mode | CV, unquantized | 804 |
| Morph | default | 100% | 804 |
| Slew | default | none | 804 |
| Slew | curve | linear or exponential | 804 |
| Range | default | -5V to +10V | 804 |
| Scene button mode | default | Momentary | 804 |
| Pathway | default | scenes 1 and 8 | 804 |
| Scenes | spacing on pathway | equal | 804 |
| CV and Crossfader | combination | summed position | 804 |
| Pathway position | past last scene | wraps around | 804 |
| Quantizer scales | options | semitones, major, minor, more | 804 |
| Classic Bank | scenes in pathway | exactly two (A/B) | 804 |
| Motion Recorder | records | raw crossfader and CV | 804 |
| Copy | data copied | values plus Random amount | 804 |
| Module | hardware shared with | Catalyst Sequencer | 804 |
| Color palettes | options | 4 | 804 |
| Settings | persistence | saved on Save | 804 |
Behavior 28
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Outputs | two Scene buttons lit | crossfade between scenes | — | 804 |
| Scene button | held, Momentary Mode | scene active while held | — | 804 |
| Scene button | pressed, Blind Mode | edit without changing outputs | — | 804 |
| Scene button | pressed, Latch Mode | scene stays active | — | 804 |
| CV and Crossfader | Latch Mode | no effect | — | 804 |
| Knob | crossfading two scenes | edits both scenes | — | 804 |
| CV | 0V | first scene of pathway | — | 804 |
| CV | 5V | last scene of pathway | — | 804 |
| Gate channel | scene with gate activated | gate fires | — | 804 |
| Gate channel | Gate Mode | no crossfading | — | 804 |
| Gate channel | knob light off | no gate output | — | 804 |
| Gate channel | knob whitish-blue | gate always high | — | 804 |
| Morph | minimum | channel jumps between values | — | 804 |
| Latched scene | CV or playback applied | latch overridden | — | 804 |
| Slew | v1.3, Scene pressed | scene change slewed | — | 804 |
| Recording | armed, Play or Trig | recording starts | — | 804 |
| Recording | Play or Trig again | stops, plays back once | — | 804 |
| Recording | clock into Trig | starts on divided pulse | — | 804 |
| Recording | synced, every Nth clock | playback restarts | — | 804 |
| Add | held, crossfader between scenes | inserts scene halfway | — | 804 |
| Add | held, crossfader on scene | replaces that scene | — | 804 |
| Classic Bank | add/delete attempted | not possible | — | 804 |
| Paste | scene uses Random | new random values | — | 804 |
| Custom scales | slot empty | not shown | — | 804 |
| Custom scales | creating | Sequencer mode only | — | 804 |
| Reset | any | not used | — | 804 |
| Module | power-up after factory reset | pathway scenes 1, 8 | — | 804 |
| Startup | three left buttons held | powers up as Sequencer | — | 804 |
Functions 7
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Manual Controller | block | patchable | block Scene Engine: crossfader, scene buttons, knobs | 804 |
| Crossfader | block | patchable | block Scene Engine: crossfades scenes | 804 |
| Slew Limiter | control | internal | Slew via Shift + Channel 7 | 804 |
| CV Recorder / Gesture Looper | block | patchable | Motion Recorder: records crossfader and CV motion | 804 |
| Random / Sample & Hold CV | control | internal | Random via Shift + Scene + Channel 8 | 804 |
| Clock Divider / Multiplier | control | internal | Clock Divider for Trig jack | 804 |
| Tempo / Clock Sync | jack | patchable | jack Trig: clock-synced recording | 804 |
Power
| +12 V | 60 mA |
|---|---|
| −12 V | 25 mA |
| +5 V | 0 mA |
| Width | 20 HP |
| Depth | 24 mm |
Other Manual Controller modules
Firmware 4
| Version | Released | Notes |
|---|---|---|
| 1.3 | 2024-07 | Firmware v1.3 adds: Latch Mode for scene buttons, Color Palettes, Slew now affects scene button changes, and eight custom scale slots (created in Sequencer mode).804 |
| 1.2 | — | Firmware version 1.2: the first Page button is on briefly, then the second Page button turns on during startup.804 |
| 1.1 | — | Firmware version 1.1: the first Page button stays on for the entire duration of the startup knob animation.804 |
| 1.0 | — | Firmware version 1.0: the first Page button is on for a moment and then turns off in the middle of the startup animation.804 |
Sources 2
- [804]
-
[805]
4ms Company Catalyst Controller product page ↗product page⚠ verified 2026-05-23 · the manufacturer changed this document since