vermona/fourmulator
Vermona fourMulator Trigger / Euclidean Sequencer · Master Clock
34 HP trigger / euclidean sequencer and master clock by Vermona: 10 inputs, 10 outputs, 13 controls, 3 modes.
Vermona · fourMulator User Manual (EN) (PDF) ↗
LFO · Random / Sample & Hold CV · Master Clock · Tempo / Clock Sync · Clock Divider / Multiplier · End-of-Cycle / End-of-Rise Output · Trigger / Euclidean Sequencer · Phase-offset outputs
Inputs 10
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV 1 1134 | frequency CV cv | -5 to 5 V, bipolar | → Modulator 1, SPEED 1 knob In 1 mode
|
| RESET 1 1134 | waveform reset gate, trigger | ≤ 12 V threshold 3.5 V | → Modulator 1 |
| CV 2 1134 | frequency CV cv | -5 to 5 V, bipolar | → Modulator 2, SPEED/PHASE 2 knob In 2 modes
|
| RESET 2 1134 | waveform reset gate, trigger | ≤ 12 V threshold 3.5 V | → Modulator 2 |
| CV 3 1134 | frequency CV cv | -5 to 5 V, bipolar | → Modulator 3, SPEED/PHASE 3 knob In 2 modes
|
| RESET 3 1134 | waveform reset gate, trigger | ≤ 12 V threshold 3.5 V | → Modulator 3 |
| CV 4 1134 | frequency CV cv | -5 to 5 V, bipolar | → Modulator 4, SPEED/PHASE 4 knob In 2 modes
|
| RESET 4 1134 | waveform reset gate, trigger | ≤ 12 V threshold 3.5 V | → Modulator 4 |
| CLK IN 1134 | external clock input clock | ≤ 12 V threshold 3.5 V | → clock-generator, Modulator 1, Modulator 2, Modulator 3, Modulator 4 |
| RESET (global) 1134 | reset all Modulators gate, trigger | ≤ 12 V threshold 3.5 V | → Modulator 1, Modulator 2, Modulator 3, Modulator 4 |
The documents don't state: polarity (RESET 1, RESET 2, RESET 3, RESET 4, CLK IN, RESET (global)); scaling, coupling, audio rate, impedance (all inputs).
Outputs 10
| Jack | What it does | Range | Connections |
|---|---|---|---|
| WAVE 1 1134 | selected waveform cv | -5 to 5 V, bipolar | from Modulator 1 |
| TRIGGER 1 1134 | trigger per new cycle trigger | ≤ 12 V pulse 10 ms | from Modulator 1 |
| WAVE 2 1134 | selected waveform cv | -5 to 5 V, bipolar | from Modulator 2 |
| TRIGGER 2 1134 | trigger per new cycle trigger | ≤ 12 V pulse 10 ms | from Modulator 2 |
| WAVE 3 1134 | selected waveform cv | -5 to 5 V, bipolar | from Modulator 3 |
| TRIGGER 3 1134 | trigger per new cycle trigger | ≤ 12 V pulse 10 ms | from Modulator 3 |
| WAVE 4 1134 | selected waveform cv | -5 to 5 V, bipolar | from Modulator 4 |
| TRIGGER 4 1134 | trigger per new cycle trigger | ≤ 12 V pulse 10 ms | from Modulator 4 |
| CLK OUT 1134 | clock output clock, trigger | ≤ 12 V pulse 10 ms | from clock-generator |
| TRIG SEQ 1134 | trigger-sequence output trigger | ≤ 12 V pulse 10 ms | from trigger-sequence, Modulator 2, Modulator 3, Modulator 4 |
The documents don't state: polarity (TRIGGER 1, TRIGGER 2, TRIGGER 3, TRIGGER 4, CLK OUT, TRIG SEQ); scaling, coupling, audio rate, impedance (all outputs).
Controls 13
| Control | What it does | Affects | Positions |
|---|---|---|---|
| WAVE 1 knob 1134 | waveform select knob | Modulator 1, WAVE 1 |
|
| SPEED 1 knob 1134 | frequency knob · 0.05 to 100 Hz | Modulator 1 | In 1 mode
|
| SYNC 1 switch 1134 | sync mode select switch | Modulator 1 |
|
| WAVE 2 knob 1134 | waveform select knob | Modulator 2, WAVE 2 |
|
| SPEED/PHASE 2 knob 1134 | frequency / phase knob · 0.05 to 100 Hz | Modulator 2 | In 2 modes
|
| SYNC 2 switch 1134 | sync mode select switch | Modulator 2 |
|
| WAVE 3 knob 1134 | waveform select knob | Modulator 3, WAVE 3 |
|
| SPEED/PHASE 3 knob 1134 | frequency / phase knob · 0.05 to 100 Hz | Modulator 3 | In 2 modes
|
| SYNC 3 switch 1134 | sync mode select switch | Modulator 3 |
|
| WAVE 4 knob 1134 | waveform select knob | Modulator 4, WAVE 4 |
|
| SPEED/PHASE 4 knob 1134 | frequency / phase knob · 0.05 to 100 Hz | Modulator 4 | In 2 modes
|
| SYNC 4 switch 1134 | sync mode select switch | Modulator 4 |
|
| TAP 1134 | tap tempo button | clock-generator | — |
Blocks 6
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Modulator 1 | LFO | LFO, Random / chaos source | CV 1, RESET 1 | WAVE 1 knob, SPEED 1 knob, SYNC 1 switch | WAVE 1, TRIGGER 1 | 1134 |
| Modulator 2 | LFO | LFO, Random / chaos source | CV 2, RESET 2 | WAVE 2 knob, SPEED/PHASE 2 knob, SYNC 2 switch | WAVE 2, TRIGGER 2 | 1134 |
| Modulator 3 | LFO | LFO, Random / chaos source | CV 3, RESET 3 | WAVE 3 knob, SPEED/PHASE 3 knob, SYNC 3 switch | WAVE 3, TRIGGER 3 | 1134 |
| Modulator 4 | LFO | LFO, Random / chaos source | CV 4, RESET 4 | WAVE 4 knob, SPEED/PHASE 4 knob, SYNC 4 switch | WAVE 4, TRIGGER 4 | 1134 |
| clock-generator | clock generator | Clock generator | CLK IN | TAP | CLK OUT | 1134 |
| trigger-sequence | trigger-sequence | — | — | — | TRIG SEQ | 1134 |
Modes 3
Specs 14
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Modulator | frequency range | 0.05 to 100 Hz | — | 1134 |
| Modulator | longest period | 20 s | — | 1135 |
| SPEED/PHASE | phase shift | 0 to 180 degrees | SYNC mode | 1134 |
| SPEED | clock division settings | 8 settings | CLK mode | 1134 |
| clock division 1/1 | rate | 0.25 x incoming clock | quarter-note clock | 1134 |
| clock division 1/16 | rate | 4 x incoming clock | quarter-note clock | 1134 |
| clock division 1/32 | rate | 8 x incoming clock | quarter-note clock | 1134 |
| WAVE knob | waveforms | 6 waveforms | — | 1134 |
| TAP | taps for tempo change | 4 taps | — | 1134 |
| module | current +12V | 120 mA | — | 1134 |
| module | current -12V | 10 mA | — | 1134 |
| module | width | 34 HP | — | 1134 |
| module | depth | 25 mm | — | 1134 |
| module | weight | 365 g | — | 1134 |
Properties 8
| Subject | Property | Value | Source |
|---|---|---|---|
| Modulators | implementation | digital | 1135 |
| random waveform | type | sample & hold | 1134 |
| Modulator 1 | sync role | reference only | 1134 |
| Modulators 2-4 | sync source | left neighbor | 1134 |
| CV inputs | combination | added to SPEED/PHASE | 1134 |
| SPEED LEDs | indication | lit each new cycle | 1134 |
| clock | resolution | user-defined, relative | 1134 |
| power connector | pins | 10-pole, reverse-protected | 1134 |
Behavior 16
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Modulator 1 | SYNC switch | OFF and CLK only | — | 1134 |
| Modulator 2-4 | SYNC position | follows left neighbor's speed | — | 1134 |
| SPEED/PHASE | SYNC position | sets phase 0-180 degrees | SYNC | 1134 |
| SPEED | CLK position | selects clock division | CLK | 1134 |
| CV input | SYNC or CLK active | modulates phase or division | — | 1134 |
| CV input | pushes beyond 100 Hz | frequency limited to 100 Hz | — | 1134 |
| RESET | trigger/gate received | waveform restarts at start | — | 1134 |
| global RESET | Modulator RESET patched | that Modulator ignores global | — | 1134 |
| CLK IN | patched | internal clock disconnected from Modulators | — | 1134 |
| CLK OUT | CLK IN patched | still outputs internal clock | — | 1134 |
| internal clock | CLK IN unpatched | resumes previous tempo | — | 1134 |
| tempo setting | power off | lost | — | 1134 |
| TAP | tapped four times | tempo changes | — | 1134 |
| TRIG SEQ | no Modulator 2-4 synced | inactive | — | 1134 |
| TRIG SEQ | several Modulators synced | triggers combined per division | — | 1134 |
| synced Modulators | SPEED LEDs | flash with phase delay | — | 1134 |
Functions 8
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| LFO | block | patchable | Modulators 1-4: quad LFO, WAVE outputs | 1134 |
| Random / Sample & Hold CV | mode | patchable | WAVE random position: sample & hold | 1134 |
| Master Clock | block | patchable | clock-generator, CLK OUT | 1134 |
| Tempo / Clock Sync | jack | patchable | CLK IN and TAP; SYNC CLK mode | 1134 |
| Clock Divider / Multiplier | mode | patchable | CLK mode: eight clock divisions | 1134 |
| End-of-Cycle / End-of-Rise Output | jack | patchable | TRIGGER: trigger each new cycle | 1134 |
| Trigger / Euclidean Sequencer | jack | patchable | TRIG SEQ: trigger-sequence from synced Modulators | 1134 |
| Phase-offset outputs | mode | patchable | SYNC mode: phase shift 0-180 degrees | 1135 |
Power
| +12 V | 120 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 34 HP |
| Depth | 25 mm |
Other Trigger / Euclidean Sequencer modules
Sources 2
- [1134]
-
[1135]
Vermona fourMulator product page ↗product page⚠ verified 2026-06-04 · the manufacturer changed this document since