schlappi-engineering/angle-grinder
Schlappi Engineering Angle Grinder Lowpass Filter · Highpass Filter
18 HP lowpass filter and highpass filter by Schlappi Engineering: 9 inputs, 5 outputs, 13 controls, 4 modes.
Schlappi Engineering · Angle Grinder Manual (PDF) ↗
Analog VCO · 1V/Oct Pitch Tracking · Phase-offset outputs · Linear FM · Exponential FM · LFO · Lowpass Filter · Highpass Filter · Bandpass / Notch Filter · Simultaneous Multimode Outputs · Distortion / Saturation
Inputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN 737 | GRIND input audio, cv | — | normalled from 90 output via ALL PASS filter → GRIND attenuated by GRIND IN |
| INJECT 737 | direct input to SPIN audio, cv | coupling ac | → SPIN |
| V/OCT 737 | volts per octave cv | scaling v oct | → SPIN |
| FM 1 737 | FM over SPIN cv, audio | — | normalled from GRIND OUT → SPIN attenuated by FM 1 |
| FM 2 737 | exponential CV over SPIN cv | scaling exponential | → SPIN |
| GRIND CV 1 737 | GRIND slider CV cv | 0 to 5 V, unipolar | → GRIND, GRIND SLIDER 1 |
| GRIND CV 2 737 | GRIND slider CV cv | 0 to 5 V, unipolar | → GRIND, GRIND SLIDER 2 |
| GRIND CV 3 737 | GRIND slider CV cv | 0 to 5 V, unipolar | → GRIND, GRIND SLIDER 3 |
| GRIND CV 4 737 | GRIND slider CV cv | 0 to 5 V, unipolar | → GRIND, GRIND SLIDER 4 |
The documents don't state: voltage, polarity (IN, INJECT, V/OCT, FM 1, FM 2); scaling (IN, INJECT, FM 1, GRIND CV 1, GRIND CV 2, GRIND CV 3, GRIND CV 4); coupling (IN, V/OCT, FM 1, FM 2, GRIND CV 1, GRIND CV 2, GRIND CV 3, GRIND CV 4); audio rate, impedance (all inputs).
Outputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| GRIND OUT 737 | GRIND output audio | -11 to 11 V | from GRIND |
| SPIN 0 737 | 0 phase sine audio, cv | -2.5 to 2.5 V, bipolar | from SPIN In 2 modes
|
| SPIN 90 737 | 90 phase sine audio, cv | -2.5 to 2.5 V, bipolar | from SPIN In 2 modes
|
| SPIN 180 737 | 180 phase sine audio, cv | -2.5 to 2.5 V, bipolar | from SPIN In 2 modes
|
| SPIN 270 737 | 270 phase sine audio, cv | -2.5 to 2.5 V, bipolar | from SPIN In 2 modes
|
The documents don't state: polarity (GRIND OUT); scaling, coupling, audio rate, impedance (all outputs).
Controls 13
| Control | What it does | Affects | Positions |
|---|---|---|---|
| GRIND SLIDER 1 737 | signal amount to grind fader | GRIND | In 1 mode
|
| GRIND SLIDER 2 737 | signal amount to grind fader | GRIND | In 1 mode
|
| GRIND SLIDER 3 737 | signal amount to grind fader | GRIND | In 1 mode
|
| GRIND SLIDER 4 737 | signal amount to grind fader | GRIND | In 1 mode
|
| SPIN 737 | coarse tuning knob | SPIN | — |
| FINE 737 | fine tuning knob | SPIN | — |
| RANGE SWITCH 737 | frequency range switch | SPIN |
|
| GRIND -> SPIN 737 | feeds GRIND into SPIN knob | SPIN, GRIND | — |
| DAMPING 737 | counteracts oscillations knob | SPIN | — |
| FM 1 737 | FM 1 attenuator knob | FM 1, SPIN | — |
| GRIND IN 737 | input level to GRIND knob | GRIND, IN | — |
| FM1 header 737 | FM 1 response jumper | FM 1 |
|
| INJECT header 737 | INJECT coupling jumper | INJECT |
|
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| SPIN | quadrature sine oscillator | Oscillator, Filter, LFO | V/OCT, FM 1, FM 2, INJECT | SPIN, FINE, RANGE SWITCH, DAMPING, FM 1, GRIND -> SPIN | SPIN 0, SPIN 90, SPIN 180, SPIN 270 | 737 |
| GRIND | voltage controlled waveshaping section | Waveshaper / wavefolder, Distortion / saturation | IN, GRIND CV 1, GRIND CV 2, GRIND CV 3, GRIND CV 4 | GRIND SLIDER 1, GRIND SLIDER 2, GRIND SLIDER 3, GRIND SLIDER 4, GRIND IN | GRIND OUT | 737 |
| ALL PASS filter | phase shift filter | — | — | — | — | 737 |
Modes 4
Specs 10
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| SPIN | frequency range | 10 to 20000 Hz | HIGH range | 737 |
| SPIN | frequency range | 0.3 to 600 Hz | LOW range (specifications) | 737 |
| SPIN | frequency range | 0.1 to 500 Hz | LOW range (panel legend) | 737 |
| SPIN | frequency range | 0.3 to 500 Hz | LOW range | 738 |
| V/OCT | tracking | ≥ 4 octaves | — | 737 |
| SPIN outputs | sine amplitude | 5 Vpp | — | 737 |
| GRIND and filter outputs | maximum amplitude | ≤ 22 Vpp | — | 737 |
| module | width | 18 HP | — | 737 |
| module | current +12V | 81 mA | — | 737 |
| module | current -12V | 78 mA | — | 737 |
Properties 12
| Subject | Property | Value | Source |
|---|---|---|---|
| SPIN outputs | phase relation | 0/90/180/270 degrees | 737 |
| SPIN outputs | frequency | same oscillator, same frequency | 737 |
| module | circuit | all analog OTA | 737 |
| GRIND | components | four comparators, VCAs, mixer | 737 |
| GRIND | operation | compare and subtract | 737 |
| GRIND and filter outputs | limiting | not limited | 737 |
| GRIND CV | combination | added to slider | 737 |
| INJECT | routing | bypasses GRIND | 737 |
| INJECT | default coupling | AC | 737 |
| FM 1 | response | header-selectable lin/exp | 737 |
| FM 1 | response | linear FM | 738 |
| filter | type | state variable | 737 |
Behavior 15
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| FM 1 jack | unpatched | normalled to GRIND OUT | — | 737 |
| FM 1 knob | tracking pitch, FM unpatched | turn down | — | 737 |
| IN jack | unpatched | 90 output via all-pass | — | 737 |
| GRIND section | GRIND IN knob down | no GRIND output | — | 737 |
| SPIN | GRIND -> SPIN, DAMPING CCW | four phase-related sines | — | 737 |
| SPIN | damped or enough GRIND feedback | stops oscillating, becomes filter | — | 737 |
| SPIN | external IN, GRIND -> SPIN CW | outputs become LP/BP/HP/inv BP | filter | 737 |
| DAMPING | turned up | lets external signal through | — | 738 |
| GRIND sliders | filter mode | nonlinear feedback paths | filter | 737 |
| GRIND OUT | more sliders raised | converges on pyramidal shape | oscillate | 737 |
| GRIND OUT | external input, SPIN low frequency | resembles supersaw | — | 737 |
| GRIND OUT | external input, SPIN audio rate | metallic overtones | — | 737 |
| INJECT | AC coupled | input becomes reset spikes | — | 737 |
| INJECT | DC coupled, large input | adds to signal, may clip | — | 737 |
| GRIND OUT | waveform shape | varies by frequency | — | 737 |
Functions 11
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Analog VCO | block | patchable | SPIN quadrature sine VCO, analog | 737 |
| 1V/Oct Pitch Tracking | jack | patchable | V/OCT input | 737 |
| Phase-offset outputs | jack | patchable | SPIN 0/90/180/270 outputs | 737 |
| Linear FM | jack | patchable | FM 1 linear via header | 737 |
| Exponential FM | jack | patchable | FM 2 exponential | 737 |
| LFO | mode | patchable | LOW range, LFO mode | 737 |
| Lowpass Filter | jack | patchable | LOW PASS output when filtering | 737 |
| Highpass Filter | jack | patchable | HIGH PASS output when filtering | 737 |
| Bandpass / Notch Filter | jack | patchable | BAND PASS, INV BAND PASS outputs | 737 |
| Simultaneous Multimode Outputs | jack | patchable | four filter response outputs | 737 |
| Distortion / Saturation | block | patchable | GRIND waveshaping, distortion effect | 738 |
Power
| +12 V | 81 mA |
|---|---|
| −12 V | 78 mA |
| +5 V | — |
| Width | 18 HP |
| Depth | — |
Other Lowpass Filter modules
Sources 2
- [737]
-
[738]
Schlappi Engineering Angle Grinder product page ↗product page⚠ verified 2026-05-22 · the manufacturer changed this document since