bastl-instruments/cinnamon

Bastl Instruments Cinnamon Lowpass Filter · Highpass Filter

5 HP lowpass filter and highpass filter by Bastl Instruments: 3 inputs, 3 outputs, 8 controls.

Bastl Instruments · Cinnamon User Manual v1.4 (PDF) ↗

Lowpass Filter · Highpass Filter · Bandpass / Notch Filter · Simultaneous Multimode Outputs · Self-Oscillating Filter · 1V/Oct Pitch Tracking · Distortion / Saturation

Inputs 3

Inputs
JackWhat it doesRangeConnections
INPUT 960filter audio input
audio
—
→ state-variable filter
attenuated by Input level
Left CV 960V/oct cutoff CV
cv, pitch
scaling v oct
→ CUTOFF
Right CV 960attenuated cutoff CV
cv
—
→ CUTOFF
attenuated by Attenuator

The documents don't state: voltage, impedance (all inputs); scaling (Right CV); coupling (INPUT).

Outputs 3

Outputs
JackWhat it doesRangeConnections
HIGH-PASS 960high-pass output
audio
—
from state-variable filter
BAND-PASS 960band-pass output
audio
—
from state-variable filter
LOW-PASS 960low-pass output
audio
—
from state-variable filter

The documents don't state: voltage, coupling, impedance (all outputs).

Controls 8

Controls
ControlWhat it doesAffectsPositions
CUTOFF 960cutoff frequency
knob
state-variable filter—
Attenuator 960Right CV amount
knob
Right CV—
RESONANCE 960resonance amount
knob
state-variable filter—
Character upper switch 960resonance character
switch
state-variable filter
  • on: edgy sharp character
  • off: sinewave character
Character lower switch 960resonance character
switch
state-variable filter
  • on: saw-tooth character
  • off: sinewave character
Input level 960input gain
knob
INPUT—
DRIVE 960input gain range
switch
Input level
  • lower (OFF): gain 0 to 2
  • upper: gain 0 to 10
Volt-per-octave trimmer 960V/oct tracking adjust
other
Left CV—

Blocks 1

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
state-variable filterstate-variable filterFilterINPUT, Left CV, Right CVCUTOFF, RESONANCE, Character upper switch, Character lower switch, Input level, DRIVE, AttenuatorHIGH-PASS, BAND-PASS, LOW-PASS960

Specs 9

Specs
SubjectQuantityValueConditionSource
LOW-PASSslope12 dB/oct—960
HIGH-PASSslope12 dB/oct—960
BAND-PASSslope6 dB/oct—960
Input levelgain0 to 2 xDRIVE off960
Input levelgain0 to 10 xDRIVE on960
modulewidth5 HP—960
moduledepth35 mm—960
modulecurrent +12V≤ 30 mA—960
modulecurrent -12V≤ 30 mA—960

Properties 9

Properties
SubjectPropertyValueSource
filtertopologystate-variable960
LOW-PASSpoles2960
HIGH-PASSpoles2960
BAND-PASSpoles1960
filterself-oscillationyes960
self-oscillationwaveformsine960
self-oscillationLP/BP/HP phase0°/90°/180°960
cutoffCV combinationsummed with knob960
front panelmaterialaluminium or oak961

Behavior 8

Behavior rules
SubjectWhenEffectModeSource
filterresonance fully clockwiseself-oscillates at cutoff—960
Character switchesboth lowersinewave resonance—960
Character switchesswitched onmay disrupt V/oct tracking—960
Character switchesself-oscillatingchange the waveform—960
Character responseinput level changesresponse changes—960
Right CVAttenuator fully CCWno cutoff effect—960
Left CV trackingCharacter switches offtracks reliably—960
inputDRIVE upperlikely overdriven—960

Functions 7

Function tags
FunctionBasisScopeEvidenceSource
Lowpass Filterjackpatchablejack LOW-PASS: 2-pole low-pass960
Highpass Filterjackpatchablejack HIGH-PASS: 2-pole high-pass960
Bandpass / Notch Filterjackpatchablejack BAND-PASS: 1-pole band-pass960
Simultaneous Multimode OutputsblockpatchableLP, BP, HP outputs at once960
Self-Oscillating Filterpropertypatchablemax resonance works as oscillator960
1V/Oct Pitch Trackingjackpatchablejack Left CV: 1V/oct cutoff960
Distortion / SaturationcontrolpatchableDRIVE switch overdrives input960

Power

+12 V30 mA
−12 V30 mA
+5 V—
Width5 HP
Depth35 mm

Other Lowpass Filter modules

All Lowpass Filter modules →

Sources 2

  1. [960]
    Cinnamon User Manual v1.4 ↗manual · primary
    ● verified 2026-05-25
  2. [961]
    Bastl Cinnamon product page ↗product page
    ⚠ verified 2026-05-25 · the manufacturer changed this document since