schlappi-engineering/100-grit
Schlappi Engineering 100 Grit Lowpass Filter · Distortion / Saturation
14 HP lowpass filter and distortion / saturation by Schlappi Engineering: 6 inputs, 2 outputs, 16 controls.
Schlappi Engineering · 100 Grit Manual (PDF) ↗
Lowpass Filter · Self-Oscillating Filter · VCA · Distortion / Saturation · Exponential FM
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN 1 979 | filter audio input audio | -5 to 5 V, bipolar audio rate yes | normalled from DIST 2 → low pass filter attenuated by IN 1 |
| IN 2 979 | second filter input audio | audio rate yes | normalled from DIST → low pass filter attenuated by IN 2 |
| FM1 979 | filter frequency modulation cv, audio | audio rate yes | normalled from DIST → low pass filter attenuated by FM1 |
| FM 2 980 | exponential cutoff CV cv, pitch | scaling exponential | → low pass filter |
| GAIN 979 | VCA gain CV cv, audio | 0 to 5 V, unipolar audio rate yes | normalled from POLE 2 → VCA attenuated by GAIN CV |
| RES 979 | resonance CV cv, audio | 0 to 5 V, unipolar audio rate yes | normalled from DIST → low pass filter attenuated by RES CV |
The documents don't state: voltage, polarity (IN 2, FM1, FM 2); scaling (FM1, GAIN, RES); coupling, impedance (all inputs); audio rate (FM 2).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 979 | VCA output audio | — | from VCA selected by Output Source (J10) = VCA In 1 mode
|
| DIST 979 | distortion output audio | — | from distortion circuit |
The documents don't state: voltage, polarity, coupling, impedance (all outputs).
Controls 16
| Control | What it does | Affects | Positions |
|---|---|---|---|
| IN 1 979 | input 1 level knob | IN 1, low pass filter | — |
| IN 2 979 | input 2 level knob | IN 2, low pass filter | — |
| FM1 979 | FM1 amount knob | FM1, low pass filter | — |
| FREQUENCY 980 | filter cutoff knob | low pass filter | — |
| RES 979 | resonance knob | low pass filter | — |
| RES CV 979 | resonance CV amount knob | RES, low pass filter | — |
| GAIN 979 | VCA gain knob | VCA, distortion circuit | — |
| GAIN CV 979 | gain CV amount knob | GAIN, VCA | — |
| x100 SWITCH 979 | gain x100 switch | distortion circuit |
|
| Input to Resonance (J9) 979 | input to resonance sum jumper | low pass filter |
|
| Output Source (J10) 979 | OUT signal source jumper | OUT |
|
| DIST 1 AMP PIN 979 | touch point input/output other | distortion circuit | — |
| FREQ CV 979 | touch point filter CV other | low pass filter | — |
| DIST OUT 979 | touch point DIST output other | distortion circuit | — |
| GAIN CV touch point 979 | touch point VCA CV other | VCA | — |
| Resonance Amplitude Trim (RV3) 979 | resonance amount trim other | low pass filter | — |
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| low pass filter | transistor ladder filter | Filter | IN 1, IN 2, FM1, FM 2, RES | FREQUENCY, RES, RES CV, IN 1, IN 2, FM1 | OUT | 979 |
| VCA | OTA VCA | VCA | GAIN | GAIN, GAIN CV | OUT | 979 |
| distortion circuit | distortion amplifier | Distortion / saturation | — | x100 SWITCH | DIST | 979 |
| DIST 2 | unstable distortion amplifier | Distortion / saturation | — | — | — | 979 |
| POLE 2 | 12dB filter output | — | — | — | — | 979 |
Specs 11
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| inputs | safe input range | -12 to 12 V | — | 979 |
| audio input | optimized level | 10 Vpp | — | 979 |
| OUT | maximum level | 22 Vpp | — | 979 |
| DIST | maximum level | 12 Vpp | — | 979 |
| GAIN, RES CV | unity gain voltage | 5 V | — | 979 |
| module | width | 14 HP | — | 981 |
| module | depth | 25 mm | — | 981 |
| module | +12V current | 55 mA | — | 981 |
| module | -12V current | 70 mA | — | 981 |
| touch points | count | 8 points | — | 981 |
| normalled feedback paths | count | 6 paths | — | 981 |
Properties 10
| Subject | Property | Value | Source |
|---|---|---|---|
| module | design | all analog | 981 |
| low pass filter | topology | transistor ladder | 979 |
| low pass filter | self-oscillation | yes | 979 |
| VCA | type | OTA | 979 |
| VCA | character | soft saturation | 981 |
| distortion circuit | basis | vintage headphone amplifier | 981 |
| distortion circuit | output | self limiting | 979 |
| touch points | connection | resistive with current limiting | 979 |
| inputs | unpatched | feedback normalled | 979 |
| FM 2 | tracking | roughly V/oct, untuned | 980 |
Behavior 12
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| IN 1 | unpatched | receives DIST 2 comparator | — | 979 |
| IN 2 | unpatched | receives DIST resonance path | — | 979 |
| FM1 | unpatched | DIST modulates filter frequency | — | 979 |
| GAIN | unpatched | POLE 2 modulates VCA | — | 979 |
| RES | unpatched | DIST modulates resonance | — | 979 |
| GAIN knob | no CV applied | must be up for output | — | 980 |
| IN 1 knob | above 50-75% | input starts overdriving | — | 979 |
| GAIN knob | above about 75% | starts overdriving | — | 979 |
| GAIN, RES CV | above 5V | more than unity gain | — | 979 |
| OUT | J10 on filter pins | unaffected by GAIN | — | 979 |
| filter | J9 removed | self-oscillation overtakes input | — | 979 |
| DIST 1 AMP PIN | touched alone | may pick up radio | — | 979 |
Functions 5
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Lowpass Filter | block | patchable | block: transistor core low pass filter | 981 |
| Self-Oscillating Filter | property | patchable | RES trim to self-oscillation | 979 |
| VCA | block | patchable | block: OTA VCA | 981 |
| Distortion / Saturation | block | patchable | block: distortion circuit, DIST out | 981 |
| Exponential FM | jack | patchable | jack FM 2: exponential cutoff control | 980 |
Power
| +12 V | 55 mA |
|---|---|
| −12 V | 70 mA |
| +5 V | — |
| Width | 14 HP |
| Depth | 25 mm |
Other Lowpass Filter modules
Sources 3
- [979]
- [980]
-
[981]
Schlappi Engineering 100 Grit product page ↗product page⚠ verified 2026-05-26 · the manufacturer changed this document since