Qu-Bit Electronix Nautilus Delay · Reverb
14 HP delay and reverb by Qu-Bit Electronix: 13 inputs, 3 outputs, 15 controls, 13 modes.
Qu-Bit Electronix · Qu-Bit Nautilus Manual v1.2.1 (firmware v1.2.0) (PDF) ↗
Delay · Reverse playback · Freeze / Hold · Pitch Shifter / Frequency Shifter · Tempo / Clock Sync · Reverb · Lowpass Filter · Highpass Filter · Distortion / Saturation · Wavefolder · Stereo Inputs / Outputs
Inputs 13
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Mix CV 669 | dry/wet mix CV cv | -5 to 5 V, bipolar | → Mix, Mix |
| Resolution CV 669 | clock div/mult CV cv | -5 to 5 V, bipolar | → delay network, Resolution |
| Feedback CV 669 | feedback amount CV cv | -5 to 5 V, bipolar | → delay network, Feedback attenuated by Attenuverter 2 |
| Sensors CV 669 | active delay lines CV cv | -5 to 5 V, bipolar | → delay network, Sensors |
| Dispersal CV 669 | delay spacing CV cv | -5 to 5 V, bipolar | → delay network, Dispersal attenuated by Dispersal Attenuverter |
| Reversal CV 669 | reversed lines CV cv | -5 to 5 V, bipolar | → delay network, Reversal |
| Chroma CV 669 | effect select CV cv | -5 to 5 V, bipolar | → Chroma, Chroma |
| Depth CV 669 | effect amount CV cv | -5 to 5 V, bipolar | → Chroma, Depth |
| Clock In 669 | external clock input clock | threshold 0.4 V | → internal clock, delay network |
| Freeze Gate Input 669 | freeze delay buffer gate | threshold 0.4 V | → delay network |
| Purge Gate Input 669 | clear delay lines gate | threshold 0.4 V | → delay network |
| Audio Input Left 669 | left audio input audio | -5 to 5 V, bipolar coupling ac | → delay network, Mix |
| Audio Input Right 669 | right audio input audio | -5 to 5 V, bipolar coupling ac | normalled from Audio Input Left → delay network, Mix |
The documents don't state: voltage, polarity (Clock In, Freeze Gate Input, Purge Gate Input); scaling, audio rate, impedance (all inputs); coupling (Mix CV, Resolution CV, Feedback CV, Sensors CV, Dispersal CV, Reversal CV, Chroma CV, Depth CV, Clock In, Freeze Gate Input, Purge Gate Input).
Outputs 3
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio Output Left 669 | left audio output audio | -5 to 5 V | from Mix, reverb |
| Audio Output Right 669 | right audio output audio | -5 to 5 V | from Mix, reverb |
| Sonar Output 669 | algorithmic CV/gate output cv, gate, clock | 0 to 5 V, unipolar | from Sonar, delay network In 3 modes
|
The documents don't state: polarity (Audio Output Left, Audio Output Right); scaling, pulse, audio rate (Sonar Output); coupling, impedance (all outputs).
Controls 15
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Mix 669 | dry/wet blend knob | Mix |
|
| Tap Tempo Button 669 | tap internal clock button | internal clock | — |
| Resolution 669 | clock div/mult knob | delay network |
In 1 mode
|
| Feedback 669 | delay feedback amount knob | delay network | — |
| Sensors 669 | active delay lines knob · 2 to 8 delay lines | delay network |
|
| Dispersal 669 | delay line spacing knob | delay network | — |
| Dispersal Attenuverter 669 | Dispersal CV attenuverter knob · bipolar | Dispersal CV |
|
| Attenuverter 2 669 | assignable CV attenuverter knob · bipolar | Feedback CV | — |
| Reversal 669 | reversed delay lines knob | delay network |
|
| Chroma 669 | feedback effect select knob | Chroma |
|
| Depth 669 | Chroma effect amount knob | Chroma |
|
| Freeze Button 669 | lock delay buffer button | delay network | — |
| Delay Mode Button 669 | delay type select button | delay network |
|
| Feedback Mode Button 669 | feedback path select button | delay network |
|
| Purge Button 669 | clear delay lines button | delay network | — |
Blocks 7
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| delay network | complex delay network | Delay | Audio Input Left, Audio Input Right, Resolution CV, Feedback CV, Sensors CV, Dispersal CV, Reversal CV, Freeze Gate Input, Purge Gate Input | Resolution, Feedback, Sensors, Dispersal, Reversal, Freeze Button, Delay Mode Button, Feedback Mode Button, Purge Button | — | 669 |
| Chroma | feedback path effects | Filter, Distortion / saturation, Waveshaper / wavefolder | Chroma CV, Depth CV | Chroma, Depth | — | 669 |
| reverb | end of chain reverb | Reverb | — | — | — | 669 |
| Mix | dry/wet blend | Crossfader / panner | Mix CV | Mix | Audio Output Left, Audio Output Right | 669 |
| internal clock | tap tempo clock | Clock generator | Clock In | Tap Tempo Button | — | 669 |
| Sonar | CV/gate generator | — | — | — | Sonar Output | 669 |
| attenuverters | assignable attenuverters | Attenuverter / offset | — | Dispersal Attenuverter, Attenuverter 2 | — | 669 |
Modes 13
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Fade | delay mode | Delay Mode Button = Fade | Delay Mode button | 669 |
| Doppler | delay mode | Delay Mode Button = Doppler | Delay Mode button | 669 |
| Shimmer | delay mode | Delay Mode Button = Shimmer | Delay Mode button | 669 |
| De-Shimmer | delay mode | Delay Mode Button = De-Shimmer | Delay Mode button | 669 |
| Normal | feedback mode | Feedback Mode Button = Normal | Feedback Mode button | 669 |
| Ping Pong | feedback mode | Feedback Mode Button = Ping Pong | Feedback Mode button | 669 |
| Cascade | feedback mode | Feedback Mode Button = Cascade | Feedback Mode button | 669 |
| Adrift | feedback mode | Feedback Mode Button = Adrift | Feedback Mode button | 669 |
| Freerunning Delay | delay time mode | — | hold Tap + press Delay Mode | 669 |
| Summed Mono | dry signal mode | — | hold Tap + press Feedback Mode | 669 |
| Stepped Voltage | Sonar output | — | Narwhal settings file | 669 |
| Master Clock | Sonar output | — | Narwhal settings file | 669 |
| Variable Clock | Sonar output | — | Narwhal settings file | 669 |
Specs 21
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| clock | clock rate range | 0.25 to 1000 Hz | — | 669 |
| internal clock | default tempo at boot | 120 BPM | — | 669 |
| delay network | delay lines | 8 lines | — | 669 |
| delay line | max audio per line | ≤ 20 s | — | 670 |
| delay network | max delay time | ≤ 80 s | Cascade mode | 669 |
| Freeze | max frozen buffer length | ≤ 10 s | — | 669 |
| Shimmer | transpose up | 1 to 12 semitones | default 12 | 669 |
| De-Shimmer | transpose down | 1 to 12 semitones | default 12 | 669 |
| Sonar Output | gate duty cycle | 50 % | gate output | 669 |
| Sonar Output | gate amplitude | 5 V | gate output | 669 |
| audio | noise floor | -102 dB | — | 669 |
| audio | sample rate | 48 kHz | — | 669 |
| audio | conversion bit depth | 24 bit | — | 669 |
| knobs and CV inputs | resolution | 16 bit | — | 669 |
| module | width | 14 HP | — | 669 |
| module | depth | 22 mm | — | 669 |
| power | +12V current | 151 mA | — | 669 |
| power | -12V current | 6 mA | — | 669 |
| power | -12V current | 15 mA | — | 670 |
| USB port | external power draw | ≤ 500 mA | — | 669 |
| Tap Tempo Button | minimum taps | 2 taps | — | 669 |
Properties 9
| Subject | Property | Value | Source |
|---|---|---|---|
| audio IO | channels | true stereo | 669 |
| Chroma | placement | within feedback path | 669 |
| Chroma | application | per delay line | 669 |
| attenuverters | assignment | any CV input | 669 |
| reverb | affects | dry and wet | 669 |
| Mix | default curve | linear | 669 |
| Freeze | default timing | next clock pulse | 669 |
| USB Port | type | USB-A, FAT32 | 669 |
| platform | DSP platform | Daisy | 669 |
Behavior 23
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Mix | fully counter-clockwise | dry signal only | — | 669 |
| Mix | fully clockwise | wet signal only | — | 669 |
| Sensors | fully counter-clockwise | 1 line per channel | — | 669 |
| Sensors | fully clockwise | 4 lines per channel | — | 669 |
| Dispersal | only 1 Sensor active | fine tunes L/R offset | — | 669 |
| Dispersal Attenuverter | at 12 o'clock | CV fully attenuated | — | 669 |
| Dispersal Attenuverter | fully counter-clockwise | CV fully inverted | — | 669 |
| Reversal | one Sensor selected | none, left, then both | — | 669 |
| Reversal | knob lowered below position | line returns forward | — | 669 |
| Reversal | Shimmer or De-Shimmer mode | repeats once before shifting | — | 669 |
| Depth | fully counter-clockwise | Chroma effect off | — | 669 |
| Depth | Refraction Interference selected | fixed random lo-fi amounts | — | 669 |
| Freeze | engaged | wet acts as beat repeat | — | 669 |
| Freeze | Quantize Freeze on | activates on next clock | — | 669 |
| Freeze | Freeze Mix Always Wet | forces Mix full wet | — | 669 |
| Purge | button pressed / gate high | clears all delay lines | — | 669 |
| Purge | Continuous Purge enabled | active while held/high | — | 669 |
| Normal feedback | left-only input | delay only left output | Normal | 669 |
| Sensors | Cascade or Adrift mode | adds line outputs to wet | — | 669 |
| Audio Input Left | Audio Input Right unpatched | feeds both channels | — | 669 |
| internal clock | at boot | 120 BPM | — | 669 |
| Delay/Feedback Mode | Clear On Mode Change enabled | buffers cleared on change | — | 669 |
| Resolution | new position selected | Kelp LEDs flash white | — | 669 |
Functions 11
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Delay | block | patchable | block delay network: 8 delay lines | 669 |
| Reverse playback | control | patchable | control Reversal: delay lines played backwards | 669 |
| Freeze / Hold | jack | patchable | jack Freeze Gate Input: locks delay buffer | 669 |
| Pitch Shifter / Frequency Shifter | mode | patchable | modes Shimmer / De-Shimmer: pitch shifted delay | 669 |
| Tempo / Clock Sync | jack | patchable | jack Clock In + Tap Tempo: delays synced to clock | 669 |
| Reverb | block | patchable | block reverb: end of chain reverb (Tap+Resolution) | 669 |
| Lowpass Filter | control | internal | Chroma Oceanic Absorption: 4-pole lowpass in feedback | 669 |
| Highpass Filter | control | internal | Chroma White Water: 4-pole highpass in feedback | 669 |
| Distortion / Saturation | control | internal | Chroma: bitcrush, saturation, SOS distortion | 669 |
| Wavefolder | control | internal | Chroma Receptor Malfunction: wavefolder distortion | 669 |
| Stereo Inputs / Outputs | property | patchable | true stereo audio IO | 669 |
Power
| +12 V | 151 mA |
|---|---|
| −12 V | 6 mA |
| +5 V | 0 mA |
| Width | 14 HP |
| Depth | 22 mm |
Other Delay modules
Firmware 5
| Version | Released | Notes |
|---|---|---|
| v1.2.1 | 2025-03-17 | Fixed Factory Reset button combo to be Tap+Purge.669 |
| v1.2.0 | 2024-06-01 | Added mix curve options via Narwhal; LED dimmer via Tap+Chroma; freerunning delay time via Tap+Delay Mode; Summed Mono Mode via Tap+Feedback Mode; end-of-chain reverb; Continuous Purge; custom LED colors via Narwhal.669 |
| v1.1.2 | 2022-12-12 | Added USB power section to Technical Specifications.669 |
| v1.1.1 | 2022-10-24 | Fixed text box issue in Reversal section.669 |
| v1.1.0 | 2022-10-06 | Initial release firmware.669 |
Sources 2
- [669]
-
[670]
Qu-Bit Nautilus product page ↗product page⚠ verified 2026-05-21 · the manufacturer changed this document since