qu-bit-electronix/bloom-v2
Qu-Bit Electronix Bloom v2 Step Sequencer · Master Clock
18 HP step sequencer and master clock by Qu-Bit Electronix: 8 inputs, 11 outputs, 28 controls, 15 modes.
Qu-Bit Electronix · Qu-Bit Bloom v2 Manual v1.1.0 (PDF) ↗
Step Sequencer · Master Clock · Tempo / Clock Sync · Clock Divider / Multiplier · LFO · Slew Limiter
Inputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Rate CV 683 | internal clock rate CV cv | -5 to 5 V, bipolar | → Rate, Internal clock |
| Clock Input 683 | external clock clock | threshold 0.4 V | → Channel 1, Channel 2, Channel 3 |
| Root CV 683 | diatonic transpose CV cv | 0 to 5 V, unipolar | → Root |
| Reset 683 | reset to first step gate, trigger | — | → Channel 1, Channel 2, Channel 3 |
| Branch CV 683 | branch amount CV cv | -5 to 5 V, bipolar | → Branch In 2 modes
|
| Path CV 683 | branch path CV cv | -5 to 5 V, bipolar | → Path In 2 modes
|
| Mutate CV 683 | mutation probability CV cv | -5 to 5 V, bipolar | → Mutate In 2 modes
|
| Reseed Gate 683 | randomize focused channel gate, trigger | threshold 0.4 V | → Reseed |
The documents don't state: voltage (Clock Input, Reset, Reseed Gate); threshold (Reset); impedance (all inputs).
Outputs 11
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Note 1 683 | channel 1 pitch pitch, cv | 0 to 5 V, unipolar scaling v oct | from Channel 1 |
| Gate 1 683 | channel 1 gate gate | 0 to 5 V, unipolar | from Channel 1 |
| Mod 1 683 | channel 1 modulation cv | 0 to 5 V, unipolar scaling v oct | from Channel 1, Mod Output In 4 modes
|
| Note 2 683 | channel 2 pitch pitch, cv | 0 to 5 V, unipolar scaling v oct | from Channel 2 |
| Gate 2 683 | channel 2 gate gate | 0 to 5 V, unipolar | from Channel 2 |
| Mod 2 683 | channel 2 modulation cv | 0 to 5 V, unipolar scaling v oct | from Channel 2, Mod Output In 4 modes
|
| Note 3 683 | channel 3 pitch pitch, cv | 0 to 5 V, unipolar scaling v oct | from Channel 3 |
| Gate 3 683 | channel 3 gate gate | 0 to 5 V, unipolar | from Channel 3 |
| Mod 3 683 | channel 3 modulation cv | 0 to 5 V, unipolar scaling v oct | from Channel 3, Mod Output In 4 modes
|
| Clock Output 683 | clock rate gate clock, gate | ≤ 5 V | from Internal clock, Clock Input |
| MIDI Out 683 | TRS MIDI sequence data midi | — | from Channel 1, Channel 2, Channel 3 |
The documents don't state: impedance (all outputs).
Controls 28
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Rate 683 | internal clock rate knob · 0 to 60 Hz | Internal clock | — |
| Root 683 | diatonic transpose knob | Channel 1, Channel 2, Channel 3 | — |
| Branch 683 | generative branch amount knob · 0 to 7 branches | Branches | In 2 modes
|
| Path 683 | branch navigation order knob | Branches | In 2 modes
|
| Mutate 683 | step mutation probability knob | Channel 1, Channel 2, Channel 3 | In 2 modes
|
| Channel 683 | select focused channel button | Channel 1, Channel 2, Channel 3 | — |
| Page 683 | advance 8-step page button | Step Encoders | — |
| Step Encoders 683 | per-step editing knob | Channel 1, Channel 2, Channel 3 |
In 5 modes
|
| Reset 683 | reset to first step button | Channel 1, Channel 2, Channel 3 | — |
| Knob Mode 683 | cycle knob modes button | Branch, Path, Mutate |
|
| Tune Mode 683 | cycle step editors button | Step Encoders |
|
| Reseed 683 | randomize focused channel button | Channel 1, Channel 2, Channel 3 | — |
| Shift 683 | secondary functions button | Step Encoders | — |
| Input PPQN 683 | external clock PPQN menu setting | — | — |
| Output PPQN 683 | clock output PPQN menu setting | — | — |
| Reseed Gate Channel 683 | Reseed input target menu setting | — | — |
| Branch CV Channel 683 | Branch CV target menu setting | — | — |
| Path CV Channel 683 | Path CV target menu setting | — | — |
| Mutate CV Channel 683 | Mutate CV target menu setting | — | — |
| Root CV Channel 683 | Root CV target menu setting | — | — |
| Resize Algorithm 683 | resize expand method menu setting | — | — |
| Generate MIDI Clock 683 | MIDI clock output menu setting | — | — |
| Ratchets Fixed Pulse Width 683 | ratchet pulse width menu setting | — | — |
| Gate Micro Delay 683 | gate output delay menu setting | — | — |
| Enable Autosave 683 | autosave to USB menu setting | — | — |
| Page Increment 683 | Page button range menu setting | — | — |
| Reseed Filter 683 | Reseed target modes menu setting | — | — |
| Regenerate Branches Filter 683 | branch regeneration edits menu setting | — | — |
Blocks 8
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Internal clock | clock | Clock generator | Rate CV | Rate | Clock Output | 683 |
| Channel 1 | sequence channel | Step sequencer | Clock Input, Reset, Branch CV, Path CV, Mutate CV, Root CV, Reseed Gate | Step Encoders, Branch, Path, Mutate, Root | Note 1, Gate 1, Mod 1, MIDI Out | 683 |
| Channel 2 | sequence channel | Step sequencer | Clock Input, Reset, Branch CV, Path CV, Mutate CV, Root CV, Reseed Gate | Step Encoders, Branch, Path, Mutate, Root | Note 2, Gate 2, Mod 2, MIDI Out | 683 |
| Channel 3 | sequence channel | Step sequencer | Clock Input, Reset, Branch CV, Path CV, Mutate CV, Root CV, Reseed Gate | Step Encoders, Branch, Path, Mutate, Root | Note 3, Gate 3, Mod 3, MIDI Out | 683 |
| Branches | generative branches | — | Branch CV, Path CV | Branch, Path | — | 683 |
| Mod Output | per-step modulation | LFO | — | Step Encoders | Mod 1, Mod 2, Mod 3 | 683 |
| MIDI Out | TRS MIDI output | MIDI / USB interface | — | — | MIDI Out | 683 |
| USB MIDI Host | MIDI host port | MIDI / USB interface | — | — | — | 683 |
Modes 15
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Default | knob mode | Knob Mode = Default | — | 683 |
| Micro Mutate | knob mode | Knob Mode = Micro Mutate | — | 683 |
| Performance | knob mode | Knob Mode = Performance | — | 683 |
| Note | tune mode | Tune Mode = Note | — | 683 |
| Gate Length | tune mode | Tune Mode = Gate Length | — | 683 |
| Slew | tune mode | Tune Mode = Slew | — | 683 |
| Ratchet | tune mode | Tune Mode = Ratchet | — | 683 |
| Mod | tune mode | Tune Mode = Mod | — | 683 |
| Shapes | Mod Output mode | — | hold Shift, press Knob Mode | 683 |
| Velocity | Mod Output mode | — | hold Shift, press Knob Mode | 683 |
| Smooth | Mod Output mode | — | hold Shift, press Knob Mode | 683 |
| Envelope | Mod Output mode | — | hold Shift, press Knob Mode | 683 |
| Playback Mode | tuning reference mode | — | hold Shift, tap Tune Mode | 683 |
| Page Mode | tuning reference mode | — | hold Shift, tap Tune Mode | 683 |
| Step Mode | tuning reference mode | — | hold Shift, tap Tune Mode | 683 |
Specs 46
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| sequencer | channels | 3 channels | — | 683 |
| sequence | steps per channel | 1 to 64 steps | — | 683 |
| Branches | branches after trunk | 0 to 7 branches | — | 683 |
| sequence | max generative length | 512 steps | — | 683 |
| Path | paths at max branches | 128 paths | — | 683 |
| Rate | max clock rate | 60 Hz | x1 speed | 683 |
| Note outputs | range | 0 to 5 V | — | 683 |
| Note outputs | pitch range | 5 octaves | — | 683 |
| Gate outputs | amplitude | 5 V | — | 683 |
| Gate outputs | default duty cycle | 50 % | — | 683 |
| Gate Length | minimum | 5 % of clock | — | 683 |
| Gate Length | maximum | 100 % | — | 683 |
| Mod outputs | range | 0 to 5 V | — | 683 |
| Clock Output | duty cycle | 50 % | — | 683 |
| Clock Output | level | 5 V | — | 683 |
| Clock Input | threshold | 0.4 V | — | 683 |
| Reseed Gate | threshold | 0.4 V | — | 683 |
| Rate CV | range | -5 to 5 V | — | 683 |
| Root CV | range | 0 to 5 V | — | 683 |
| Branch/Path/Mutate CV | range | -5 to 5 V | — | 683 |
| PPQN | input/output values | 1 to 24 PPQN | 1, 4, 8, 24 | 683 |
| Mutate | fixed pitch mutation | 75 % | start of Zone 2 | 683 |
| Mutate gate mutation | length change chance | 70 % | — | 683 |
| Mutate gate mutation | step toggle chance | 30 % | — | 683 |
| Performance Branch | max ratchet | 6 x | Zone 1 | 683 |
| ornamentation | range | 50 to 100 % of knob | Performance Mutate | 683 |
| two-step ornaments | range | 50 to 67 % of knob | — | 683 |
| four-step ornaments | range | 68 to 84 % of knob | — | 683 |
| Max Ornamentation | trill length | 8 steps | — | 683 |
| Pattern | slots | 16 slots | — | 683 |
| Scale | quantizations | 8 scales | — | 683 |
| Unquantized | encoder step | 25 cents | — | 683 |
| Order | playback options | 8 options | — | 683 |
| Mod Shapes | shapes | 8 shapes | — | 683 |
| Mod Output | modes | 4 modes | — | 683 |
| MIDI Out | clock | 24 PPQN | — | 683 |
| MIDI Root Note Offset | default | 48 note | — | 683 |
| MIDI notes | default velocity | 100 velocity | — | 683 |
| USB Port | external power draw | ≤ 500 mA | — | 683 |
| knobs, CV inputs | resolution | 16 bit | — | 683 |
| LED Dimmer | brightness | 5 to 100 % | — | 683 |
| module | width | 18 HP | — | 683 |
| module | depth | 22 mm | — | 683 |
| module | current +12V | 137 mA | — | 683 |
| module | current -12V | 1 mA | — | 683 |
| module | current +5V | 0 mA | — | 683 |
Properties 20
| Subject | Property | Value | Source |
|---|---|---|---|
| Branches | transformations | reverse, inverse, transpose | 683 |
| Branches | more transformations | mutate, randomize | 683 |
| Scale | options | chromatic, major, minor, pentatonics... | 683 |
| Order | options | forward, reverse, pendulum, random... | 683 |
| Order | more options | converge, diverge, page jump | 683 |
| Resize | algorithms | Spread, Stretch, Clone | 683 |
| Micro Mutate mode | edits | destructive | 683 |
| Performance mode | edits | non-destructive | 683 |
| Transpose | edits | destructive, diatonic | 683 |
| Root | transpose | diatonic, stays in key | 683 |
| MIDI Out | connector | 3.5mm TRS | 683 |
| MIDI Out | note channels | 1, 2, 3 | 683 |
| MIDI Out | Mod CC | 1 | 683 |
| MIDI Out | Slew CC | 84 | 683 |
| USB Port | type | USB-A, FAT32 drive | 683 |
| USB MIDI Host | program change | load/save patterns | 683 |
| MIDI CC inputs | combination | added to knob, CV | 683 |
| platform | based on | Daisy | 683 |
| Gate lengths | clock changes | auto-adjust | 683 |
| Reseed Gate, CV inputs | target channel | focused (Narwhal configurable) | 683 |
Behavior 37
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Rate | fully left | internal clock off | — | 683 |
| Clock Input | Rate fully left | drives sequences | — | 683 |
| Clock Output | external clock used | matches external clock | — | 683 |
| Reset | internal clock | resets instantly | — | 683 |
| Reset | external clock | resets on next pulse | — | 683 |
| Branches | trunk edited | regenerated | — | 683 |
| Path | more branches | more paths available | — | 683 |
| Mutate | fully left | no mutations | — | 683 |
| Mutate | Zone 1 | note mutation only | Default | 683 |
| Mutate | end of Zone 1 | 100% note mutation | Default | 683 |
| Mutate | Zone 2 | gate state/length mutation | Default | 683 |
| Mutate | Zone 2 | adds ornamentation, arpeggiation | Performance | 683 |
| ornamentation | does not occur | equal-chance note mutation | Performance | 683 |
| Branch/Path/Mutate | Zone 1 | probabilistic random amounts | Performance | 683 |
| Path | Zone 2 | fixed slew all steps | Performance | 683 |
| Performance controls | turned off | sequence returns to original | Performance | 683 |
| Gate Length | 100% | ties to next step | — | 683 |
| tied step | next step | no retrigger, pitch updates | — | 683 |
| Slew | Trunk LEDs off | slew off | Slew | 683 |
| Mod output | step off | outputs 0V | — | 683 |
| Mod output | step off, Smooth | slides to 0V | Smooth | 683 |
| Reseed Gate | gate received | reseeds focused channel only | — | 683 |
| Transpose | beyond 5 octaves | steps clamp | — | 683 |
| MIDI CC values | exceed range | clamp at min/max | — | 683 |
| MIDI controller | disconnected | inputs not cleared | — | 683 |
| MIDI note velocity | Velocity Mod mode | uses mod data | Velocity | 683 |
| Program change | value 0 | clears focused channel | — | 683 |
| Program change | 1–16 | loads pattern slot | — | 683 |
| Program change | 17–32 | saves pattern slot | — | 683 |
| USB drive | inserted | reads Narwhal settings | — | 683 |
| Firmware Update | single .bin on USB | firmware loads | — | 683 |
| BloomCh files | at boot | load into channels | — | 683 |
| new manual edit | made | sets new unmutate point | — | 683 |
| Factory Reset | applied | Ratio x1, Length 8 | — | 683 |
| Page | default | cycles active pages only | — | 683 |
| Tuning Reference | Page Mode | loops single page | — | 683 |
| Tuning Reference | Step Mode | loops single step | — | 683 |
Functions 6
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Step Sequencer | block | patchable | 3-channel 64-step CV/gate sequencer | 683 |
| Master Clock | jack | patchable | jack Clock Output: internal clock rate | 683 |
| Tempo / Clock Sync | jack | patchable | jack Clock Input: external clock | 683 |
| Clock Divider / Multiplier | control | patchable | Ratio encoder: per-channel rate multiplier | 683 |
| LFO | documented use | patchable | documented: Mod output no-frills LFO | 683 |
| Slew Limiter | mode | internal | Slew Tune Mode: per-step portamento | 683 |
Power
| +12 V | 137 mA |
|---|---|
| −12 V | 1 mA |
| +5 V | 0 mA |
| Width | 18 HP |
| Depth | 22 mm |
Other Step Sequencer modules
Firmware 2
| Version | Released | Notes |
|---|---|---|
| v1.1.0 | 2025-07-02 | Fixed Page Increment Narwhal setting where options and their functions were swapped; added Regenerate Branches Filter to Narwhal; various UX/UI polishes.683 |
| v1.0.2 | 2025-06-17 | Initial release firmware.683 |
Sources 2
- [683]
-
[684]
Qu-Bit Bloom v2 product page ↗product page⚠ verified 2026-05-21 · the manufacturer changed this document since