behringer/182

Behringer 182 Analog Sequencer Step Sequencer · Slew Limiter

Step sequencer and slew limiter by Behringer: 2 inputs, 4 outputs, 8 controls, 5 modes.

Behringer · 182 Analog Sequencer manual (mirror of official documentation via device.report) ↗

Step Sequencer · Slew Limiter

Inputs 2

Inputs
JackWhat it doesRangeConnections
TEMPO CV IN 764tempo clock CV
cv
—
→ tempo clock
TRIG IN 764trigger input
trigger
—
→ tempo clock
In 1 mode
  • STEP: advance one step → CH-1 column, CH-2 column

The documents don't state: voltage, polarity, coupling, impedance (all inputs); scaling, audio rate (TEMPO CV IN); threshold (TRIG IN).

Outputs 4

Outputs
JackWhat it doesRangeConnections
CV OUT-1 764CH-1 column CV
cv
—
from CH-1 column, DELAY
In 2 modes
  • PARALLEL: CH-1 8-step CV
  • SERIES: 16-step CV
CV OUT-2 764CH-2 column CV
cv
—
from CH-2 column
In 2 modes
  • PARALLEL: CH-2 8-step CV
  • SERIES: 8-step CV
GATE OUT 764per-step gate
gate
—
from tempo clock
TRIG OUT 764end-step trigger
trigger
—
from tempo clock

The documents don't state: voltage, polarity, scaling, pulse, coupling, audio rate, impedance (all outputs).

Controls 8

Controls
ControlWhat it doesAffectsPositions
CH-1/CH-2 SEQUENCER COLUMNS 764per-step CV
knob
CH-1 column, CH-2 column, CV OUT-1, CV OUT-2—
TEMPO 764step speed
knob
tempo clock—
DELAY 764glide to next step
knob · 0 to 10 s
CV OUT-1—
GATE TIME 764GATE OUT duty cycle
knob · 10 to 90 %
GATE OUT—
STEP NUMBER 764sequence length
knob
CH-1 column, CH-2 column
In 2 modes
  • PARALLEL: length of both columns → CH-1 column, CH-2 column
  • SERIES: CH-2 length only → CH-2 column
STEP (REPEAT/SINGLE) 764trigger response
switch
tempo clock, TRIG IN
  • REPEAT: repeats at end
  • STEP: advance per TRIG IN
  • SINGLE: stops after one cycle
START/STOP 764start or stop sequence
button
tempo clock—
PARALLEL/SERIES 764column chaining
switch
CH-1 column, CH-2 column
  • PARALLEL: columns simultaneous, 8 steps
  • SERIES: CH-1 then CH-2, 16 steps

Blocks 4

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
CH-1 columnsequencer columnStep sequencer—CH-1/CH-2 SEQUENCER COLUMNSCV OUT-1764
CH-2 columnsequencer columnStep sequencer—CH-1/CH-2 SEQUENCER COLUMNSCV OUT-2764
tempo clockinternal tempo clockClock generatorTEMPO CV INTEMPO, START/STOPGATE OUT764
DELAYexponential portamentoSlew limiter / lag—DELAYCV OUT-1764

Modes 5

Modes
ModeKindSelected bySelection methodSource
PARALLELcolumn routingPARALLEL/SERIES = PARALLELsliding switch764
SERIEScolumn routingPARALLEL/SERIES = SERIESsliding switch764
REPEATrun modeSTEP (REPEAT/SINGLE) = REPEATsliding switch764
STEPrun modeSTEP (REPEAT/SINGLE) = STEPsliding switch764
SINGLErun modeSTEP (REPEAT/SINGLE) = SINGLEsliding switch764

Specs 5

Specs
SubjectQuantityValueConditionSource
DELAYtransition time0 to 10 s—764
GATE TIMEduty cycle10 to 90 %—764
sequencersteps≤ 8 stepsPARALLEL764
sequencersteps8 to 16 stepsSERIES764
CH-1/CH-2 SEQUENCER COLUMNSknob count16 knobs—764

Properties 2

Properties
SubjectPropertyValueSource
DELAYresponseexponential764
modulecircuitanalog764

Behavior 9

Behavior rules
SubjectWhenEffectModeSource
DELAYCV OUT-2unaffected by DELAY—764
DELAYPARALLEL or SERIESapplies to CV OUT-1—764
STEP NUMBERSERIES modeaffects only CH-2SERIES764
STEP NUMBERPARALLEL modeaffects both columnsPARALLEL764
sequenceREPEAT, end reachedrepeatsREPEAT764
sequenceSINGLE, one cycle donestopsSINGLE764
sequenceSTEP, TRIG IN triggeradvances one stepSTEP764
sequenceSERIES modeCH-1 first, then CH-2SERIES764
TRIG OUTend step reachedtrigger generated—764

Functions 2

Function tags
FunctionBasisScopeEvidenceSource
Step SequencerblockpatchableCH-1/CH-2 sequencer columns764
Slew LimitercontrolpatchableDELAY: portamento-like glide on CV OUT-1764

Power

+12 V—
−12 V—
+5 V—
Width—
Depth—

Other Step Sequencer modules

All Step Sequencer modules →

Sources 1

  1. [764]
    Behringer 182 Analog Sequencer manual (mirror of official documentation via device.report) ↗manual · primary
    ⚠ verified 2026-05-22 · the manufacturer changed this document since