mutable-instruments/marbles
Mutable Instruments Marbles Trigger / Euclidean Sequencer · Quantizer
18 HP trigger / euclidean sequencer and quantizer by Mutable Instruments: 9 inputs, 7 outputs, 15 controls, 12 modes.
Mutable Instruments · Marbles Manual (full) ↗
Random / Sample & Hold CV · Master Clock · Probability / Bernoulli Gate · Trigger / Euclidean Sequencer · Clock Divider / Multiplier · Quantizer · Slew Limiter · CV Recorder / Gesture Looper
Inputs 9
| Jack | What it does | Range | Connections |
|---|---|---|---|
| BIAS (t) 547 | t bias CV cv | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → t generator, BIAS (t) |
| RATE 547 | clock rate CV (V/O) cv, pitch | -5 to 5 V, bipolar scaling v oct coupling dc impedance 100000 Ω | → t generator, RATE In 1 mode
|
| JITTER 547 | jitter CV cv, trigger | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → t generator, JITTER In 1 mode
|
| CLOCK (t) 547 | t external clock input clock | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → t generator |
| DEJA VU 547 | DEJA VU CV input cv | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → DEJA VU section, DEJA VU |
| STEPS 547 | steps CV cv, trigger | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → X generator, STEPS In 1 mode
|
| SPREAD 547 | spread CV cv, pitch | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → X generator, SPREAD In 1 mode
|
| BIAS (X) 547 | X bias CV cv | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | → X generator, BIAS (X) |
| CLOCK (X) 550 | X external clock input clock, gate | -5 to 5 V, bipolar coupling dc impedance 100000 Ω | normalled from t1/t2/t3 → X generator |
The documents don't state: threshold (CLOCK (t), CLOCK (X)).
Outputs 7
| Jack | What it does | Range | Connections |
|---|---|---|---|
| t1 547 | random gate output gate | 0 to 8 V | from t generator |
| t2 547 | jittery master clock gate, clock | 0 to 8 V | from t generator |
| t3 547 | random gate output gate | 0 to 8 V | from t generator |
| X1 547 | random CV output cv, pitch | -5 to 5 V | from X generator |
| X2 547 | random CV output cv, pitch | -5 to 5 V | from X generator |
| X3 547 | random CV output cv, pitch | -5 to 5 V | from X generator |
| Y 547 | smooth random output cv | -5 to 5 V, bipolar | from Y generator |
The documents don't state: impedance (all outputs).
Controls 15
| Control | What it does | Affects | Positions |
|---|---|---|---|
| RATE 547 | clock rate knob | t generator | In 2 modes
|
| Clock range 547 | clock range x4/÷4 button | t generator |
|
| JITTER 547 | clock timing randomness knob | t generator | In 1 mode
|
| BIAS (t) 547 | t1 / t3 likelihood knob | t1, t3 | In 1 mode
|
| t mode button 547 | t generator model button | t generator |
|
| t DEJA VU button 547 | DEJA VU on t button | t generator, DEJA VU section |
|
| X DEJA VU button 547 | DEJA VU on X button | X generator, DEJA VU section |
|
| DEJA VU 547 | re-cycling probability knob | DEJA VU section | — |
| LENGTH 547 | loop length knob · 1 to 16 steps | DEJA VU section | — |
| Output voltage range 547 | X range select button | X1, X2, X3 |
|
| SPREAD 547 | distribution width/shape knob | X generator | In 2 modes
|
| BIAS (X) 547 | distribution bias knob · bipolar | X generator | In 2 modes
|
| STEPS 547 | steppiness / quantization knob | X generator, STEPS quantizer | In 1 mode
|
| X mode button 547 | channel diversity button | X1, X2, X3 |
|
| External processing 547 | external processing mode button | X generator |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| t generator | random gate generator | Clock generator, Clock divider / multiplier, Random / chaos source, Gate / trigger processor | RATE, JITTER, BIAS (t), CLOCK (t) | RATE, Clock range, JITTER, BIAS (t), t mode button | t1, t2, t3 | 547 |
| DEJA VU section | random loop memory | Random / chaos source | DEJA VU | t DEJA VU button, X DEJA VU button, DEJA VU, LENGTH | — | 547 |
| X generator | random voltage generator | Random / chaos source, Sample & hold, Slew limiter / lag, Quantizer | SPREAD, BIAS (X), STEPS, CLOCK (X) | Output voltage range, SPREAD, BIAS (X), STEPS, X mode button, External processing | X1, X2, X3 | 547 |
| Y generator | smooth random source | Random / chaos source | — | X mode button | Y | 547 |
| STEPS quantizer | programmable quantizer | Quantizer | — | STEPS, Output voltage range, External processing | X1, X2, X3 | 547 |
Modes 12
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| coin toss | t generator model | t mode button = green | t mode button | 547 |
| random ratio | t generator model | t mode button = orange | t mode button | 547 |
| kick/snare alternation | t generator model | t mode button = red | t mode button | 547 |
| Independent Bernoulli | t alternate mode | t mode button = long press | long press t mode, green | 551 |
| Deterministic divider/multiplier | t alternate mode | t mode button = long press | long press t mode, orange | 551 |
| Three states | t alternate mode | t mode button = long press | long press t mode, red | 551 |
| External processing mode | X input mode | External processing = press | press External processing | 547 |
| shift-register | X external processing | — | diversity green, ext clock, ext CV | 547 |
| scale recording | quantizer programming | External processing = hold 2s | hold External processing 2s | 547 |
| scale selection | quantizer setting | Output voltage range = hold 2s | hold Output voltage range 2s | 547 |
| super lock | DEJA VU state | — | long press DEJA VU button | 549 |
| explicit reset | input repurpose | — | hold t and X mode buttons | 549 |
Specs 27
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 18 HP | — | 548 |
| module | depth | 25 mm | — | 548 |
| module | +12V current | 80 mA | — | 547 |
| module | -12V current | 20 mA | — | 547 |
| RATE | clock rate at 12 o'clock | 120 BPM | — | 547 |
| Clock range | rate factor | 0.25 to 4 x | — | 547 |
| gate length | duty cycle | 1 to 99 % | t1 and t3 | 547 |
| t2 | duty cycle | 50 % | — | 547 |
| LENGTH | loop length | 1 to 16 steps | — | 548 |
| X outputs | range | 0 to 2 V | range 1 | 547 |
| X outputs | range | 0 to 5 V | range 2 | 547 |
| X outputs | range | -5 to 5 V | range 3 | 547 |
| Y generator | range | -5 to 5 V | default | 547 |
| Y generator | clock relative to X2 | 0.0625 ratio; 0.015625 to 1 ratio | default 1/16 | 547 |
| t section | max input clock rate | ≤ 1 kHz | — | 548 |
| X section | max input clock rate | ≤ 8 kHz | — | 548 |
| inputs | bandwidth | 0 to 3200 Hz | — | 548 |
| module | refresh rate | 32 kHz | — | 548 |
| DAC | resolution | 14 bit | — | 548 |
| DAC | error | ≤ 1 mV | — | 548 |
| CV capture | resolution | 12 bit | — | 548 |
| gate outputs | level | 0 to 8 V | — | 548 |
| external processing | CV/gate timing tolerance | ≤ 3 ms | — | 547 |
| STEPS quantizer | scale slots | 6 scales | — | 548 |
| scale programming | recommended jam length | ≥ 50 notes | — | 547 |
| implicit reset | clock pause | 3 s | or 4 clock intervals, longest | 549 |
| explicit reset | reset lead before clock | 1 ms | ideal | 549 |
Properties 8
| Subject | Property | Value | Source |
|---|---|---|---|
| random source | type | analog | 548 |
| DEJA VU | virtual notch | 12 o'clock | 547 |
| Y | DEJA VU | never affected | 547 |
| t generator | rhythm follower | locks uneven divisions | 548 |
| module | processor | STM32F405RGT6 | 548 |
| module | DAC | DAC8164 | 548 |
| STEPS quantizer | factory scales root | C (0V) | 547 |
| preset scales | list | major/minor/pentatonic/pelog/raags | 550 |
Behavior 34
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| CLOCK (t) | patched | replaces internal clock | — | 547 |
| RATE | external t clock | becomes division/multiplication | — | 547 |
| JITTER | external t clock | applied to external clock | — | 547 |
| CLOCK (X) | patched | X1-X3 follow external clock | — | 547 |
| X outputs | CLOCK (X) unpatched | clocked by t1, t2, t3 | — | 547 |
| DEJA VU | 7 to 12 o'clock | recycle probability 0 to 1 | — | 547 |
| DEJA VU | 12 to 5 o'clock | loop jump probability rises | — | 547 |
| DEJA VU | at 12 o'clock | locked loop, buttons blink | — | 547 |
| DEJA VU | past 12, length 1 | outputs frozen | — | 547 |
| SPREAD knob | fully counter-clockwise | constant voltage | — | 547 |
| SPREAD knob | 12 o'clock | bell curve | — | 547 |
| SPREAD knob | 2 o'clock | uniform distribution | — | 547 |
| SPREAD knob | fully clockwise | min/max only, random gates | — | 547 |
| STEPS knob | 12 o'clock | S&H steps | — | 547 |
| STEPS knob | turned CCW | smoother, then smooth curves | — | 547 |
| STEPS knob | turned CW | quantized, notes progressively removed | — | 547 |
| external processing | needs random value | samples SPREAD CV input | External processing mode | 547 |
| BIAS (X) | external processing | acts as transposition | External processing mode | 547 |
| STEPS | external processing | all outputs follow STEPS | External processing mode | 547 |
| X outputs | ext processing, X unclocked | same melody, some sustained | External processing mode | 547 |
| X2/X3 | green diversity, ext clock+CV | shift-register by one tick | External processing mode | 547 |
| Output voltage range LED | external processing | off | External processing mode | 547 |
| scale programming | scale played ascending | no gradual carving | — | 547 |
| STEPS quantizer | STEPS clockwise from 12 | least frequent notes removed | — | 547 |
| t and X sections | clock after long pause | counters and patterns reset | — | 549 |
| JITTER reset | rising edge | reset on next clock tick | explicit reset | 549 |
| STEPS reset | rising edge | X loop reset next tick | explicit reset | 549 |
| t reset | X clock unpatched or from t | cascades to X | explicit reset | 549 |
| reset | coincides with clock pulse | behavior unspecified | explicit reset | 549 |
| super lock | button pressed | returns to normal | super lock | 549 |
| external processing | X clock cable unplugged | X1 data copied to loops | External processing mode | 549 |
| Independent Bernoulli | each pulse | t1, t3 independent tosses | Independent Bernoulli | 551 |
| Three states | each pulse | t1, t3 or none | Three states | 551 |
| t alternate mode | short press | reverts to normal mode | — | 551 |
Functions 8
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Random / Sample & Hold CV | block | patchable | X generator: X1-X3, Y | 547 |
| Master Clock | block | patchable | t generator: internal clock on t2 | 547 |
| Probability / Bernoulli Gate | block | patchable | t1/t3 coin-toss routing, BIAS | 547 |
| Trigger / Euclidean Sequencer | block | patchable | t generator rhythmic patterns | 548 |
| Clock Divider / Multiplier | mode | patchable | RATE divides/multiplies external clock | 547 |
| Quantizer | block | patchable | STEPS programmable quantizer | 547 |
| Slew Limiter | control | patchable | STEPS CCW: lag-processing | 548 |
| CV Recorder / Gesture Looper | mode | patchable | external CV recorded in DEJA VU | 548 |
Power
| +12 V | 80 mA |
|---|---|
| −12 V | 20 mA |
| +5 V | — |
| Width | 18 HP |
| Depth | 25 mm |
Other Trigger / Euclidean Sequencer modules
Firmware 4
| Version | Released | Notes |
|---|---|---|
| 1.3 | — | Fixed spurious DEJA VU loop playback jumps and rare loop-change bug at 12 o'clock. Fixed external clock stutter bug. Improved quantizer hysteresis and LENGTH knob virtual notch. Added implicit reset after 3-second clock pause. Added explicit reset feature via JITTER CV (t reset) and STEPS CV (X reset) inputs when both mode buttons are held.549 |
| 1.2 | — | Fixed external-processing-mode behavior when switching from external to internal X clock. Added automatic t-section pattern reset after 3-second clock pause. Added 'super lock' feature: long press on DEJA VU buttons locks a section independently of the DEJA VU knob.549 |
| 1.1 | — | Added color-blind LED mode (hold X MODE on power-up). Fixed bug causing X-section clock follower to go haywire when a cable is inserted in the X clock input.549 |
| 1.0 | — | Initial release.549 |
Sources 5
- [547]
- [548]
- [549]
- [550]
- [551]