make-noise/rene

Make Noise René Step Sequencer · Quantizer

34 HP step sequencer and quantizer by Make Noise: 8 inputs, 6 outputs, 53 controls, 10 modes.

Make Noise · René Manual (current; the post-Classic three-channel sequencer) (PDF) ↗

Step Sequencer · Quantizer · Random / Sample & Hold CV · Slew Limiter

Inputs 8

Inputs
JackWhat it doesRangeConnections
X-CLK 238X clock
clock, gate
threshold 2.5 V
pulse 2.5 ms
→ X/Red Channel, C/Orange Channel
X-MOD 238X MODifier gate
gate, trigger
threshold 2.5 V
pulse 2.5 ms
→ X/Red Channel, C/Orange Channel
In 4 modes
  • FUN.MOD.RESET: reset on rising edge → X/Red Channel, C/Orange Channel
  • FUN.MOD.CLK: extra clock (triggers) → X/Red Channel, C/Orange Channel
  • FUN.MOD.RUNSTP: run high, stop low → X/Red Channel, C/Orange Channel
  • FUN.CV.S&H: sample trigger → X/Red Channel
X-CV (in) 238X control voltage
cv
0 to 5 V, unipolar
normalled from +5V
→ X/Red Channel, C/Orange Channel
attenuated by X-CV Combo Pot
In 4 modes
  • FUN.CV.ADD: added to location value → X/Red Channel, Quantizer
  • FUN.CV.LOC: addresses location → X/Red Channel, C/Orange Channel
  • FUN.CV.SNAKE: selects Snake pattern → X/Red Channel
  • FUN.CV.S&H: sampled, added to location → X/Red Channel, Quantizer
Y-CLK 238Y clock
clock, gate
threshold 2.5 V
pulse 2.5 ms
→ Y/Green Channel, C/Orange Channel
Y-MOD 238Y MODifier gate
gate, trigger
threshold 2.5 V
pulse 2.5 ms
→ Y/Green Channel, C/Orange Channel
In 4 modes
  • FUN.MOD.RESET: reset on rising edge → Y/Green Channel, C/Orange Channel
  • FUN.MOD.CLK: extra clock (triggers) → Y/Green Channel, C/Orange Channel
  • FUN.MOD.RUNSTP: run high, stop low → Y/Green Channel, C/Orange Channel
  • FUN.CV.S&H: sample trigger → Y/Green Channel
Y-CV (in) 238Y control voltage
cv
0 to 5 V, unipolar
normalled from +5V
→ Y/Green Channel, C/Orange Channel
attenuated by Y-CV Combo Pot
In 4 modes
  • FUN.CV.ADD: added to location value → Y/Green Channel, Quantizer
  • FUN.CV.LOC: addresses location → Y/Green Channel, C/Orange Channel
  • FUN.CV.SNAKE: selects Snake pattern → Y/Green Channel
  • FUN.CV.S&H: sampled, added to location → Y/Green Channel, Quantizer
Z-MOD 238next enabled STATE
gate, trigger
threshold 2.5 V
pulse 2.5 ms
→ Z Axis
Z-CV 238STATE select, Global Reset
cv
0 to 5 V, unipolar
→ Z Axis

The documents don't state: voltage, polarity (X-CLK, X-MOD, Y-CLK, Y-MOD, Z-MOD); impedance (all inputs).

Outputs 6

Outputs
JackWhat it doesRangeConnections
X-CV (out) 238X sequence CV
cv, pitch
unipolar
scaling v oct
from X/Red Channel, Quantizer
X-G 238X gate output
gate, trigger
0 to 8 V, unipolar
from X/Red Channel
In 2 modes
  • FUN.OP.TRIG OFF: clock-width gate
  • FUN.OP.TRIG ON: short trigger
Y-CV (out) 238Y sequence CV
cv, pitch
unipolar
scaling v oct
from Y/Green Channel, Quantizer
Y-G 238Y gate output
gate, trigger
0 to 8 V, unipolar
from Y/Green Channel
In 2 modes
  • FUN.OP.TRIG OFF: clock-width gate
  • FUN.OP.TRIG ON: short trigger
C-CV (out) 238C sequence CV
cv, pitch
unipolar
scaling v oct
from C/Orange Channel, Quantizer
C-G 238C gate output
gate, trigger
0 to 8 V, unipolar
from C/Orange Channel
In 2 modes
  • FUN.OP.TRIG OFF: clock-width gate
  • FUN.OP.TRIG ON: short trigger

The documents don't state: voltage (X-CV (out), Y-CV (out), C-CV (out)); impedance (all outputs).

Controls 53

Controls
ControlWhat it doesAffectsPositions
CV Knob 1 238location 1 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 2 238location 2 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 3 238location 3 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 4 238location 4 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 5 238location 5 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 6 238location 6 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 7 238location 7 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 8 238location 8 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 9 238location 9 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 10 238location 10 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 11 238location 11 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 12 238location 12 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 13 238location 13 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 14 238location 14 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 15 238location 15 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
CV Knob 16 238location 16 CV value
knob
X/Red Channel, Y/Green Channel, C/Orange Channel—
Button 1 238grid location 1
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 2 238grid location 2
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 3 238grid location 3
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 4 238grid location 4
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 5 238grid location 5
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 6 238grid location 6
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 7 238grid location 7
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 8 238grid location 8
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 9 238grid location 9
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 10 238grid location 10
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 11 238grid location 11
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 12 238grid location 12
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 13 238grid location 13
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 14 238grid location 14
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 15 238grid location 15
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
Button 16 238grid location 16
button
X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis—
X-CV Combo Pot 238X-CV attenuator, 5V offset
knob
X-CV (in)—
Y-CV Combo Pot 238Y-CV attenuator, 5V offset
knob
Y-CV (in)—
X Channel Button 238select X channel, Latch
button
X/Red Channel—
Y Channel Button 238select Y channel, Latch
button
Y/Green Channel—
C Channel Button 238select C channel, Latch
button
C/Orange Channel—
Left Button 238previous Program Page
button
X/Red Channel, Y/Green Channel, C/Orange Channel—
Right Button 238next Program Page
button
X/Red Channel, Y/Green Channel, C/Orange Channel—
FUN.OP.SLEEP 238non-ACCESS location behavior
menu setting
X/Red Channel, Y/Green Channel, C/Orange Channel
  • ON: CV rests at locations
  • OFF: seeks past locations
FUN.OP.TRIG 238gate width, gate ties
menu setting
X-G, Y-G, C-G
  • ON: short triggers
  • OFF: follow clock width
FUN.OP.SCAN 238write knobs to channel
menu setting
X/Red Channel, Y/Green Channel, C/Orange Channel—
FUN.MOD.RESET 238MOD resets channel
menu setting
X/Red Channel, Y/Green Channel, C/Orange Channel
  • ON: enabled
  • OFF: disabled
FUN.MOD.CLK 238MOD adds clocks
menu setting
X/Red Channel, Y/Green Channel, C/Orange Channel
  • ON: enabled
  • OFF: disabled
FUN.MOD.RUNSTP 238MOD runs/stops channel
menu setting
X/Red Channel, Y/Green Channel, C/Orange Channel
  • ON: enabled
  • OFF: disabled
FUN.CV.ADD 238CV added to location
menu setting
X/Red Channel, Y/Green Channel
  • ON: enabled
  • OFF: disabled
FUN.CV.LOC 238CV addresses location
menu setting
X/Red Channel, Y/Green Channel, C/Orange Channel
  • ON: enabled
  • OFF: disabled
FUN.CV.SNAKE 238CV selects Snake pattern
menu setting
X/Red Channel, Y/Green Channel
  • ON: enabled
  • OFF: disabled
FUN.CV.S&H 238MOD-sampled CV add
menu setting
X/Red Channel, Y/Green Channel
  • ON: enabled
  • OFF: disabled
GL.Z.ON 238Z inputs always active
menu setting
Z Axis
  • ON: enabled
  • OFF: disabled
GBL.Z.RESET 238State change resets channels
menu setting
Z Axis, X/Red Channel, Y/Green Channel, C/Orange Channel
  • ON: enabled
  • OFF: disabled
GBL.BUS 238Select Bus behavior
menu setting
Select Bus
  • OFF: Free
  • Red: Lead
  • Green: Follow
GBL.STORE 238store all States
menu setting
Z Axis—

Blocks 6

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
X/Red ChannelSnake channelStep sequencerX-CLK, X-MOD, X-CV (in)X Channel ButtonX-CV (out), X-G238
Y/Green ChannelSnake channelStep sequencerY-CLK, Y-MOD, Y-CV (in)Y Channel ButtonY-CV (out), Y-G238
C/Orange ChannelCartesian channelStep sequencerX-CLK, Y-CLK, X-MOD, Y-MOD, X-CV (in), Y-CV (in)C Channel ButtonC-CV (out), C-G238
Quantizeronboard quantizer (per channel)QuantizerX-CV (in), Y-CV (in)—X-CV (out), Y-CV (out), C-CV (out)238
Z AxisSTATE selection—Z-MOD, Z-CVLeft Button, Right Button—238
Select BusSelect Bus————238

Modes 10

Modes
ModeKindSelected bySelection methodSource
ACCESSProgram Page—Left/Right buttons238
GATEProgram Page—Left/Right buttons238
GLIDEProgram Page—Left/Right buttons238
SNAKEProgram Page—Left/Right buttons238
FUNProgram Page—Left/Right buttons238
QUANTProgram Page—Left/Right buttons238
LATCHLatch page—press current channel button238
Select STATEState pageY Channel Button = State PagesLeft+Right, then Y238
M-PasteState pageX Channel Button = State PagesLeft+Right, then X238
GlobalState pageC Channel Button = State PagesLeft+Right, then C238

Hidden functions 10

Hidden functions
FunctionTriggerAffectsSource
enter/exit STATE Pagespress Left+Right togetherSelect STATE, M-Paste, Global238
Latch pagepress current channel button againX/Red Channel, Y/Green Channel, C/Orange Channel238
disable Statehold Left, touch enabled locationZ Axis238
Multi-Pastehold X/Red on M-Paste pageZ Axis238
Bank viewpress Y/X again on State pageZ Axis238
Version displaypress C again on Global page—238
Default StateButton 13 on Global pageZ Axis238
RevertButton 16 on Global pageZ Axis238
calibrate CV outputhold Left + Button 13/14/15 on GlobalX-CV (out), Y-CV (out), C-CV (out)238
manual reset/advance/run-stoppress FUN.MOD button, MOD unpatchedX/Red Channel, Y/Green Channel, C/Orange Channel238

Specs 16

Specs
SubjectQuantityValueConditionSource
CV outputsrange0 to 4 octaves—238
QUANT octave rangeselectable range1 to 4 octaves—238
clock/MOD inputsmin pulse width≥ 2.5 ms—238
clock/MOD inputsmin amplitude≥ 2.5 V—238
moduleSTATEs64 states—238
modulebanks4 banks of 16—238
channellocations16 locations—238
Snakepatterns16 patterns—238
STOREduration8 to 10 s—238
calibrationduration2 to 3 min—238
Select Busbaud rate31250 bps—238
Select Busmodules per bus board≤ 20 modules—238
modulepower +12V235 mA—238
modulepower -12V0 mA—238
modulewidth34 HP—238
modulemax depth32 mm—239

Properties 11

Properties
SubjectPropertyValueSource
CV outputscalibrationfactory 1V/oct, user-calibratable238
X/Y glide timebasisclock rate238
C glide timebasisconstant238
CV inputsunpatched normal+5V238
C channelFUN.CV.LOC depth1/4 of X/Y238
C channelFUN.CV.ADD / S&Hnot affected238
C channelSNAKE pagenone238
Select Busbus lineINT.CV, active low238
Z-CV / CV.LOC scalingtypeabsolute238
Latch / M-Pastestoredno238
MOD clocks (FUN.MOD.CLK)gate outputalways triggers238

Behavior 41

Behavior rules
SubjectWhenEffectModeSource
C channelX-CLK pulsemoves horizontally—238
C channelY-CLK pulsemoves vertically—238
LocationACCESS OFFskipped by sequence—238
LocationGATE ONgate output fires—238
LocationGLIDE ONCV glides to value—238
LATCH pagelocations touchedoverrides ACCESS and GATE—238
LATCH pagenothing selectedreverts to ACCESS/GATE—238
Latched locationreachedalways outputs gate—238
C single-location Latchsetno gates at clock rate—238
FUN.OP.SLEEPON, non-ACCESS locationCV rests one clock—238
FUN.OP.SLEEPOFFskips non-ACCESS locations—238
C channel SLEEPinduced by an axisonly that axis wakes—238
FUN.OP.TRIGON, Gate+Glide locationgate held (tie)—238
C-GC TRIG OFF, gate locationcombines X/Y clock highs—238
FUN.MOD.RESETMOD rising edgereset to nearest Location 1—238
FUN.MOD.CLKMOD pulseextra clock advance—238
FUN.MOD.CLKCLOCK held highMOD input masked—238
FUN.MOD.RUNSTPMOD lowchannel stops—238
FUN.MOD.RUNSTP / DIRbothmutually exclusive—238
FUN.CV.ADD / S&Hbothmutually exclusive—238
FUN.CV.S&HMOD rising edgeCV sampled and added—238
FUN.CV.S&Hcable removedholds indefinitely—238
FUN.CV.SNAKEturned OFFcurrent pattern remains—238
FUN.CV.LOCclock arrivesstart point increments—238
Quantizerno octave range selectedunquantized, maximum range—238
QUANT octave rangechangedknob values redistributed—238
Knobturnedapplies when location reached—238
Z-MOD / Z-CVGL.Z.ON OFFactive only on Select STATE—238
Z-MODgate on Select STATE pagenext enabled STATE—238
GBL.Z.RESETON, State selectedall channels reset—238
Z-MODZ.RESET ON, Z.ON OFFglobal reset, no State change—238
STOREin progresssequencing stops—238
power-upalwayslast stored State loaded—238
power-upfirst boot viewX ACCESS page—238
Multi-Pasteperformedall States M-Paste disabled—238
Multi-Pastealwaysinto one Bank at once—238
Statealwaysat least one enabled—238
GBL.BUSLeadtransmits State actions—238
GBL.BUSFollowmatches Select Bus State—238
GBL.BUSdefaultFree—238
calibrationnot stored afterwardslost at power-off—238

Functions 4

Function tags
FunctionBasisScopeEvidenceSource
Step Sequencerblockpatchableblocks X/Y Snake and C Cartesian channels238
Quantizerblockpatchableblock Quantizer: per-channel QUANT page238
Random / Sample & Hold CVmodepatchablemode FUN.CV.S&H: MOD samples CV238
Slew LimitercontrolinternalGLIDE page: per-location glide238

Power

+12 V235 mA
−12 V0 mA
+5 V—
Width34 HP
Depth32 mm

Other Step Sequencer modules

All Step Sequencer modules →

Firmware 1

VersionReleasedNotes
133—Added gate tie behavior to FUN.OP.TRIG: locations with both Gate and Glide enabled cause the gate output to stay high until a non-Glide-enabled location is reached, enabling variable-length tied notes. Also includes bug fixes.238

Sources 2

  1. [238]
  2. [239]
    Make Noise René product page ↗product page
    ⚠ verified 2026-05-06 · the manufacturer changed this document since