make-noise/lxd
Make Noise LxD Lowpass Gate
4 HP lowpass gate by Make Noise: 6 inputs, 2 outputs.
Make Noise · LxD Manual (PDF) ↗
Lowpass Gate · Vactrol · VCA
Inputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Signal Input CH1 442 | signal to process audio, cv | coupling dc | → CH1 Low Pass Gate |
| Control Signal Input CH1 442 | vactrol gate CV cv | 0 to 8 V, unipolar coupling dc | → CH1 Low Pass Gate |
| STRIKE Input CH1 442 | strike/pluck vactrol gate gate, trigger, clock | 8 to 10 V | → CH1 Low Pass Gate |
| Signal Input CH2 442 | signal to process audio, cv | coupling dc | normalled from Signal Output CH1 → CH2 Low Pass Gate |
| Control Signal Input CH2 442 | vactrol gate CV cv | 0 to 8 V, unipolar coupling dc | → CH2 Low Pass Gate |
| STRIKE Input CH2 442 | strike/pluck vactrol gate gate, trigger, clock | 8 to 10 V | → CH2 Low Pass Gate |
The documents don't state: voltage (Signal Input CH1, Signal Input CH2); threshold, impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Signal Output CH1 442 | processed signal audio, cv | coupling dc | from CH1 Low Pass Gate |
| Signal Output CH2 442 | processed signal audio, cv | coupling dc | from CH2 Low Pass Gate |
The documents don't state: voltage, impedance (all outputs).
Controls 0
The record lists no controls.
Blocks 2
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| CH1 Low Pass Gate | mildly-resonant low pass gate | Low-pass gate | Signal Input CH1, Control Signal Input CH1, STRIKE Input CH1 | — | Signal Output CH1 | 442 |
| CH2 Low Pass Gate | non-resonant low pass gate | Low-pass gate | Signal Input CH2, Control Signal Input CH2, STRIKE Input CH2 | — | Signal Output CH2 | 442 |
Specs 12
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| CH1 filter | slope | 12 dB/oct | — | 442 |
| CH2 filter | slope | 6 dB/oct | — | 442 |
| Signal Input CH2 | input level | ≤ 15 Vpp | — | 442 |
| Control Signal Input | range | 0 to 8 V | — | 442 |
| STRIKE Input | expected gate | 8 to 10 V | — | 442 |
| power | +12V current | 25 mA | per manual | 442 |
| power | -12V current | 25 mA | per manual | 442 |
| power | +12V current | 20 mA | per product page | 443 |
| power | -12V current | 20 mA | per product page | 443 |
| module | width | 4 HP | — | 442 |
| module | max depth | 36 mm | — | 443 |
| module | vactrol count | 2 vactrols | — | 442 |
Properties 10
| Subject | Property | Value | Source |
|---|---|---|---|
| CH1 | resonance | mildly resonant | 442 |
| CH2 | resonance | non-resonant | 442 |
| LxD | coupling | direct coupled | 442 |
| LxD | gain cell | vactrol | 442 |
| LxD | noise/distortion | extremely low | 442 |
| CH1 VCA | attack/decay | faster than CH2 | 442 |
| CH2 VCA | attack | moderate | 442 |
| CH2 VCA | decay | slow | 442 |
| LxD | response speed | slower than typical VCF/VCA | 442 |
| Control Signal Input | sensitivity | highly sensitive | 442 |
Behavior 6
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Signal Input CH2 | nothing patched | receives Signal Output CH1 | — | 442 |
| CH1 into CH2 | normalled in series | VCF into VCA arrangement | — | 442 |
| STRIKE Input | gate received | plucks vactrol gate | — | 442 |
| Low Pass Gate | Control Signal rises | amplitude up, lows first | — | 442 |
| Low Pass Gate | Control Signal falls | highs attenuated first | — | 442 |
| CH2 | amplitude decays | high frequencies lost too | — | 442 |
Functions 3
Power
| +12 V | 25 mA |
|---|---|
| −12 V | 25 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 36 mm |
Other Lowpass Gate modules
Sources 2
- [442]
-
[443]
Make Noise LxD product page ↗product page⚠ verified 2026-05-17 · the manufacturer changed this document since