doepfer/a-101-2
Doepfer A-101-2 Lowpass Filter · Lowpass Gate
8 HP lowpass filter and lowpass gate by Doepfer: 5 inputs, 1 output, 6 controls, 3 modes.
Doepfer · A-101-2 Vactrol Low Pass Gate Manual (PDF) ↗
Lowpass Gate · Lowpass Filter · VCA · Vactrol · Self-Oscillating Filter
Inputs 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV In 1 438 | frequency/loudness CV 1 cv | — | → low pass filter, VCA In 3 modes
|
| CV In 2 438 | frequency/loudness CV 2 cv | — | → low pass filter, VCA attenuated by CV2 In 3 modes
|
| Audio In 438 | audio input audio | coupling dc | → Low Pass Gate attenuated by Level |
| G1 438 | function control gate 1 gate | 0 to 12 V | → Function selected by Function = L+V/Ext. |
| G2 438 | function control gate 2 gate | 0 to 12 V | → Function selected by Function = L+V/Ext. |
The documents don't state: voltage (CV In 1, CV In 2, Audio In); scaling, threshold, impedance (all inputs).
Outputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Audio Out 438 | audio output audio | coupling dc | from Low Pass Gate |
The documents don't state: voltage, impedance (Audio Out).
Controls 6
| Control | What it does | Affects | Positions |
|---|---|---|---|
| F/A 438 | manual frequency/loudness knob | low pass filter, VCA | In 3 modes
|
| CV2 438 | CV In 2 attenuator knob | CV In 2 | — |
| Level 438 | audio input attenuator knob | Audio In | — |
| Resonance 438 | resonance control knob | low pass filter | In 3 modes
|
| Function 438 | mode toggle switch | Low Pass Gate, G1, G2 |
|
| LED 438 | vactrol illumination display other | F/A | — |
Blocks 3
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Low Pass Gate | vactrol low pass gate | Low-pass gate | CV In 1, CV In 2, Audio In, G1, G2 | F/A, CV2, Level, Resonance, Function | Audio Out | 438 |
| low pass filter | 12 dB low pass | Filter | CV In 1, CV In 2 | F/A, Resonance | Audio Out | 438 |
| VCA | vactrol VCA | VCA | CV In 1, CV In 2 | F/A | Audio Out | 438 |
Modes 3
Specs 9
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| low pass filter | slope | 12 dB/oct | — | 438 |
| low pass filter | lowest frequency | 50 Hz | — | 439 |
| G1/G2 | low level | 0 to 2 V | — | 438 |
| G1/G2 | high level | 3 to 12 V | — | 438 |
| Level | distortion onset position | 5 dial | — | 438 |
| module | width | 8 HP | — | 439 |
| module | depth | 50 mm | — | 439 |
| module | current +12V | 20 mA | — | 439 |
| module | current -12V | 20 mA | — | 439 |
Properties 7
Behavior 11
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| G1/G2 | switch not L+V/Ext. | gate inputs not used | — | 438 |
| G1 high, G2 low | switch at L+V/Ext. | low pass mode | — | 438 |
| G1 low, G2 low | switch at L+V/Ext. | low pass+VCA mode | — | 438 |
| G1 low, G2 high | switch at L+V/Ext. | VCA mode | — | 438 |
| VCA | F/A at minimum | signal not fully attenuated | VCA | 439 |
| CV inputs | fast envelopes or audio FM | vactrols cannot follow | — | 438 |
| Level | above about 5 | distortion appears | — | 438 |
| Audio In distortion | VCA or LP+VCA mode | smaller than low pass | — | 438 |
| Resonance | fully counterclockwise | original Buchla sound | — | 438 |
| Resonance | increased | audio level increases | — | 439 |
| low pass+VCA | loudness decreases | sound becomes duller | low pass+VCA | 438 |
Functions 5
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Lowpass Gate | block | patchable | block Low Pass Gate: vactrol | 438 |
| Lowpass Filter | mode | patchable | mode low pass: 12 dB LP | 438 |
| VCA | mode | patchable | mode VCA | 438 |
| Vactrol | property | patchable | vactrols control frequency/loudness | 438 |
| Self-Oscillating Filter | control | patchable | Resonance up to self-oscillation | 438 |
Power
| +12 V | 20 mA |
|---|---|
| −12 V | 20 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 50 mm |
Other Lowpass Filter modules
Sources 2
- [438]
- [439]