make-noise/mmg
Make Noise MMG Multimode Filter · Lowpass Filter
12 HP multimode filter and lowpass filter by Make Noise: 8 inputs, 1 output, 7 controls.
Make Noise · MMG Manual (PDF) ↗
Lowpass Filter · Highpass Filter · Multimode Filter · Lowpass Gate · Vactrol · Self-Oscillating Filter
Inputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| DC Input 353 | direct coupled input audio, cv | coupling dc | → Input Stage |
| AC Input 353 | AC coupled input audio | coupling ac | → Input Stage attenuated by AC Input Drive |
| Mode CV Input 353 | Mode CV cv | — | normalled from Frequency control signal → Mode attenuated by Mode CV Attenuverter |
| Strike Input 353 | briefly opens filter 100% gate, trigger, clock | 8 to 10 V | → Filter core |
| Frequency CV Input 2 353 | unity gain cutoff CV cv | — | → Frequency |
| Frequency CV Input 1 353 | cutoff CV cv | — | → Frequency attenuated by Frequency CV Attenuverter |
| Q CV Input 353 | resonance CV cv | — | → Q attenuated by Q CV Attenuator |
| ACCENT Input 353 | pushes filter to 110% gate, trigger | — | → Filter core |
The documents don't state: voltage (DC Input, AC Input, ACCENT Input); polarity, coupling (Mode CV Input, Frequency CV Input 2, Frequency CV Input 1, Q CV Input, ACCENT Input); threshold, impedance (all inputs).
Outputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Signal Output 353 | processed signal audio, cv | — | from Output Stage |
The documents don't state: voltage, coupling, impedance (Signal Output).
Controls 7
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Mode 353 | LP to HP sweep knob · 0 to 100 % · unipolar | Mode circuitry |
|
| Mode CV Attenuverter 353 | Mode CV attenuverter knob · bipolar | Mode CV Input |
|
| AC Input Drive 353 | AC Input level knob | AC Input, Input Stage, Q-Factor circuit | — |
| Frequency 353 | cut-off frequency knob · unipolar | Filter core | — |
| Frequency CV Attenuverter 353 | Freq CV 1 attenuverter knob · bipolar | Frequency CV Input 1 | — |
| Q 353 | resonance level knob · unipolar | Q-Factor circuit | — |
| Q CV Attenuator 353 | Q CV attenuator knob · unipolar | Q CV Input | — |
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Input Stage | input stage | Mixer | DC Input, AC Input | AC Input Drive | — | 353 |
| Mode circuitry | swept LP/HP mode | Filter | Mode CV Input | Mode, Mode CV Attenuverter | — | 353 |
| Filter core | vactrol VCF/LPG | Filter, Low-pass gate | Frequency CV Input 1, Frequency CV Input 2, Strike Input, ACCENT Input | Frequency, Frequency CV Attenuverter | — | 353 |
| Q-Factor circuit | Q Factor (resonance) | — | Q CV Input | Q, Q CV Attenuator | — | 353 |
| Output Stage | Automatic Gain Control output | — | — | — | Signal Output | 353 |
Specs 11
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| DC/AC Input | expected level | 10 Vpp | — | 353 |
| Mode/Frequency/Q CV | range | 8 V | — | 353 |
| Strike Input | expected gate | 8 to 10 V | — | 353 |
| Strike Input | filter opening | 100 % | — | 353 |
| ACCENT Input | filter push | 110 % | — | 353 |
| filter | slope | 12 dB/oct | — | 353 |
| Mode | range | 0 to 100 % | LP at 0%, HP at 100% | 353 |
| power | +12V current | 45 mA | — | 353 |
| power | -12V current | 40 mA | — | 353 |
| module | width | 12 HP | — | 354 |
| module | max depth | 24 mm | — | 354 |
Properties 13
| Subject | Property | Value | Source |
|---|---|---|---|
| MMG | circuit | 100% analog | 353 |
| MMG | gain cells | vactrol | 353 |
| MMG | core | QMMG | 353 |
| Mode | switching | swept, not switched | 353 |
| Mode/Frequency/Q | response | slower than solid-state | 353 |
| Q | self-oscillation | in some cases | 353 |
| Q | high settings | distorts | 353 |
| Q-Factor circuit | depends on | input signal levels | 353 |
| Mode Indicator | indicates | LP to HP sweep | 353 |
| Over Load Indicator | indicates | inputs exceed ideal levels | 353 |
| Q Clip Indicator | indicates | Q feedback clipped | 353 |
| Output Stage | AGC | yes | 353 |
| vactrol gain cell | attack/decay | moderately fast / slower | 353 |
Behavior 14
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Mode CV Input | unpatched | receives Frequency control signal | — | 353 |
| Mode CV Attenuverter | set to 50% | normalization disabled | — | 353 |
| Mode CV Input | dummy cable patched | normalization disabled | — | 353 |
| quasi-band-pass | Mode LP, attenuverter full CW | Frequency also sweeps Mode | — | 353 |
| Strike Input | gate received | opens to 100%, closes slowly | — | 353 |
| ACCENT Input | gate received | pushes circuit to 110% | — | 353 |
| Over Load Indicator | inputs exceed ideal levels | lights; resonance lessened | — | 353 |
| Q | past 12:00 | Q Clip lights, aggressive resonance | — | 353 |
| Q | first half of range | clean resonance | — | 353 |
| AC Input Drive | set lower | stronger possible resonance | — | 353 |
| Frequency | below 10:00 | VCA-like loss, resonance recedes | — | 353 |
| AGC | resonance increased | output amplitude scaled down | — | 353 |
| HP mode | lowest cutoff | signal passes nearly unchanged | — | 353 |
| LP mode | highest cutoff | signal passes nearly unchanged | — | 353 |
Functions 6
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Lowpass Filter | block | patchable | Filter core: Low Pass mode | 353 |
| Highpass Filter | block | patchable | Filter core: High Pass mode | 353 |
| Multimode Filter | control | patchable | Mode: swept LP to HP, CV | 353 |
| Lowpass Gate | block | patchable | vactrol Low Pass Gate, Strike input | 353 |
| Vactrol | property | patchable | Vactrol-based gain cells | 353 |
| Self-Oscillating Filter | property | patchable | Q resonates to oscillation | 353 |
Power
| +12 V | 45 mA |
|---|---|
| −12 V | 40 mA |
| +5 V | — |
| Width | 12 HP |
| Depth | 24 mm |
Other Multimode Filter modules
Sources 2
- [353]
-
[354]
Make Noise MMG product page (retired modules archive) ↗product page⚠ verified 2026-05-15 · the manufacturer changed this document since