intellijel/quadrax
Intellijel Quadrax Function Generator · LFO
14 HP function generator and LFO by Intellijel: 8 inputs, 6 outputs, 20 controls, 11 modes.
Intellijel · Quadrax Manual v1.4 (PDF) ↗
Function Generator · ADSR Envelope · Looping / Cycling Envelope · LFO · Chaotic / Complex Modulation · Gate / Trigger Utility · Tempo / Clock Sync · 1V/Oct Pitch Tracking
Inputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| TRIG 1 745 | trigger/gate input trigger, gate, clock | — | → Channel 1 In 5 modes
|
| TRIG 2 745 | trigger/gate input trigger, gate, clock | — | → Channel 2 In 5 modes
|
| TRIG 3 745 | trigger/gate input trigger, gate, clock | — | → Channel 3 In 5 modes
|
| TRIG 4 745 | trigger/gate input trigger, gate, clock | — | → Channel 4 In 5 modes
|
| CV A 745 | assignable CV input cv, pitch | -10 to 10 V, bipolar scaling v oct | → CV matrix, RISE 1, FALL 1, SHAPE 1, RISE 2, FALL 2, SHAPE 2, RISE 3, FALL 3, SHAPE 3, RISE 4, FALL 4, SHAPE 4, level |
| CV B 745 | assignable CV input cv, pitch | -10 to 10 V, bipolar scaling v oct | → CV matrix, RISE 1, FALL 1, SHAPE 1, RISE 2, FALL 2, SHAPE 2, RISE 3, FALL 3, SHAPE 3, RISE 4, FALL 4, SHAPE 4, level |
| CV C 745 | assignable CV input cv, pitch | -10 to 10 V, bipolar scaling v oct | → CV matrix, RISE 1, FALL 1, SHAPE 1, RISE 2, FALL 2, SHAPE 2, RISE 3, FALL 3, SHAPE 3, RISE 4, FALL 4, SHAPE 4, level |
| CV D 745 | assignable CV input cv, pitch | -10 to 10 V, bipolar scaling v oct | → CV matrix, RISE 1, FALL 1, SHAPE 1, RISE 2, FALL 2, SHAPE 2, RISE 3, FALL 3, SHAPE 3, RISE 4, FALL 4, SHAPE 4, level |
The documents don't state: voltage, polarity (TRIG 1, TRIG 2, TRIG 3, TRIG 4); threshold, coupling, audio rate, impedance (all inputs).
Outputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT 1 745 | channel function output cv, audio | -5 to 10 V | from Channel 1 In 6 modes
|
| OUT 2 745 | channel function output cv, audio | -5 to 10 V | from Channel 2 In 6 modes
|
| OUT 3 745 | channel function output cv, audio | -5 to 10 V | from Channel 3 In 6 modes
|
| OUT 4 745 | channel function output cv, audio | -5 to 10 V | from Channel 4 In 6 modes
|
| I2C port 1 745 inferred from the documents | Qx expander connection | — | from Channel 1, Channel 2, Channel 3, Channel 4 |
| I2C port 2 745 inferred from the documents | Qx expander connection | — | from Channel 1, Channel 2, Channel 3, Channel 4 |
The documents don't state: voltage (I2C port 1, I2C port 2); polarity, scaling, coupling, audio rate, impedance (all outputs).
Controls 20
| Control | What it does | Affects | Positions |
|---|---|---|---|
| RISE 1 745 | rise time / rate knob | Channel 1 |
In 6 modes
|
| FALL 1 745 | fall time / morph knob | Channel 1 |
In 6 modes
|
| SHAPE 1 745 | curve / waveshape knob | Channel 1 |
In 6 modes
|
| LINK/CV 1 745 | channel link, CV assign button | Channel 1, CV matrix |
|
| MODE/DESTINATION 1 745 | mode / CV destination button | Channel 1, CV matrix |
|
| RISE 2 745 | rise time / rate knob | Channel 2 |
In 6 modes
|
| FALL 2 745 | fall time / morph knob | Channel 2 |
In 6 modes
|
| SHAPE 2 745 | curve / waveshape knob | Channel 2 |
In 6 modes
|
| LINK/CV 2 745 | channel link, CV assign button | Channel 2, CV matrix |
|
| MODE/DESTINATION 2 745 | mode / CV destination button | Channel 2, CV matrix |
|
| RISE 3 745 | rise time / rate knob | Channel 3 |
In 6 modes
|
| FALL 3 745 | fall time / morph knob | Channel 3 |
In 6 modes
|
| SHAPE 3 745 | curve / waveshape knob | Channel 3 |
In 6 modes
|
| LINK/CV 3 745 | channel link, CV assign button | Channel 3, CV matrix |
|
| MODE/DESTINATION 3 745 | mode / CV destination button | Channel 3, CV matrix |
|
| RISE 4 745 | rise time / rate knob | Channel 4 |
In 6 modes
|
| FALL 4 745 | fall time / morph knob | Channel 4 |
In 6 modes
|
| SHAPE 4 745 | curve / waveshape knob | Channel 4 |
In 6 modes
|
| LINK/CV 4 745 | channel link, CV assign button | Channel 4, CV matrix |
|
| MODE/DESTINATION 4 745 | mode / CV destination button | Channel 4, CV matrix |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel 1 | function generator | Envelope generator, Function generator, LFO, Random / chaos source, Gate / trigger processor | TRIG 1 | RISE 1, FALL 1, SHAPE 1, LINK/CV 1, MODE/DESTINATION 1 | OUT 1 | 745 |
| Channel 2 | function generator | Envelope generator, Function generator, LFO, Random / chaos source, Gate / trigger processor | TRIG 2 | RISE 2, FALL 2, SHAPE 2, LINK/CV 2, MODE/DESTINATION 2 | OUT 2 | 745 |
| Channel 3 | function generator | Envelope generator, Function generator, LFO, Random / chaos source, Gate / trigger processor | TRIG 3 | RISE 3, FALL 3, SHAPE 3, LINK/CV 3, MODE/DESTINATION 3 | OUT 3 | 745 |
| Channel 4 | function generator | Envelope generator, Function generator, LFO, Random / chaos source, Gate / trigger processor | TRIG 4 | RISE 4, FALL 4, SHAPE 4, LINK/CV 4, MODE/DESTINATION 4 | OUT 4 | 745 |
| CV matrix | programmable CV matrix | Modulation matrix / router | CV A, CV B, CV C, CV D | LINK/CV 1, LINK/CV 2, LINK/CV 3, LINK/CV 4, MODE/DESTINATION 1, MODE/DESTINATION 2, MODE/DESTINATION 3, MODE/DESTINATION 4 | — | 745 |
Modes 11
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| AD | channel mode | MODE/DESTINATION = unlit | MODE button unlit | 745 |
| AHR | channel mode | MODE/DESTINATION = red | MODE button red | 745 |
| CYCLE | channel mode | MODE/DESTINATION = green | MODE button green | 745 |
| BURST | channel mode | MODE/DESTINATION = yellow | MODE button yellow | 745 |
| LFO | channel mode | MODE/DESTINATION = magenta | MODE button magenta | 745 |
| ALTERNATE | operation variant | — | long-press MODE/DESTINATION | 745 |
| LFO ALTERNATE | Low Frequency Vacillator | — | long-press MODE in LFO | 745 |
| CV Assignment mode | configuration mode | — | long-press LINK/CV | 745 |
| Utility Mode | performance mode | — | hold RISE and LEVEL 1 s | 745 |
| System Mode | boot settings mode | — | hold LEVEL at power-on | 745 |
| CVD Mode | LED color scheme | — | System Mode: press CV A | 745 |
Specs 22
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| RISE/FALL | stage time | 0.05 to 20000 ms | AD, AHR, CYCLE | 745 |
| RISE/FALL | stage time at noon | 50 ms | AD, AHR, CYCLE | 745 |
| RISE | burst pulse rate | 0.05 to 3330 Hz | BURST | 745 |
| FALL | burst length | 0.3 to 20000 ms | BURST | 745 |
| RISE | LFO rate | 0.05 to 3330 Hz | LFO, TRIG unpatched | 745 |
| RISE | clock division/multiplication | 0.015625 to 64 ratio | LFO, clock at TRIG | 745 |
| OUT | max output | 5 to 10 V | AD, AHR, CYCLE, BURST | 745 |
| OUT | LFO output range | -5 to 5 V | LFO | 745 |
| CV inputs | modulation range | -5 to 5 V | — | 745 |
| CV inputs | accepted range | -10 to 10 V | — | 745 |
| output attenuation | step | 20 % | Utility Mode | 745 |
| CV matrix | attenuation levels | 4 count | — | 745 |
| CV matrix | attenuverted levels | 8 count | — | 745 |
| CV matrix | destinations per channel | 4 count | — | 745 |
| long-press | duration | 1 s | — | 745 |
| LFO shapes | basic waveshapes | 5 count | STANDARD LFO | 745 |
| firmware version display | duration | 2 s | at power-on | 745 |
| module | width | 14 hp | — | 745 |
| module | depth | 38 mm | — | 745 |
| module | current +12V | 106 mA | — | 745 |
| module | current -12V | 9 mA | — | 745 |
| Qx expander | width | 4 hp | — | 745 |
Properties 16
| Subject | Property | Value | Source |
|---|---|---|---|
| module | state memory | retained through power-off | 745 |
| envelope curves | response | log, linear, exponential | 745 |
| CV inputs | tracking | 1 V/oct | 745 |
| CV matrix | routing | any input, any destination | 745 |
| CV destinations | list | RISE, FALL, SHAPE, LEVEL | 745 |
| TRIG inputs | jack detection | yes | 745 |
| LFO | clock sync | phase-locked | 745 |
| LED | color | green positive, red negative | 745 |
| BURST STANDARD | pulse shape | square to sine | 745 |
| BURST ALTERNATE | pulse shape | saw, triangle, ramp | 745 |
| linked triggers | combination | OR'd with own TRIG | 745 |
| Qx expander | outputs | EOR, EOF per channel | 745 |
| Gx module | compatibility | works as Qx | 745 |
| Dithering | use | 12-bit DAC modules only | 745 |
| Burst Retrigger | default | OFF | 745 |
| max output | default | 10V | 745 |
Behavior 39
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| AD | trigger received | full cycle, gate ignored | AD | 745 |
| AHR | gate high | holds maximum | AHR | 745 |
| AHR | gate goes low | release starts | AHR | 745 |
| AHR | gate shorter than rise | falls before maximum | AHR | 745 |
| CYCLE | TRIG detected | cycle resets | CYCLE | 745 |
| CYCLE | free running | no TRIG required | CYCLE | 745 |
| CYCLE | RISE plus FALL | sets frequency | CYCLE | 745 |
| LFO | TRIG unpatched | free-running | LFO | 745 |
| LFO | clock at TRIG | syncs, RISE multiplies/divides | LFO | 745 |
| LFO | RISE at noon, clocked | rate equals clock | LFO | 745 |
| linked LFOs | trigger at downstream TRIG | resets previous LFOs in chain | LFO | 745 |
| linked LFO | previous TRIG/EOR/EOF | LFO resets | LFO | 745 |
| Burst Retrigger OFF | TRIG during burst | burst must complete first | BURST | 745 |
| Burst Retrigger ON | TRIG during burst | envelope retriggers | BURST | 745 |
| Burst Retrigger ON | retrigger | phase resets at completion | BURST | 745 |
| BURST SHAPE | counterclockwise | pulse amplitudes decrease | BURST | 745 |
| BURST SHAPE | clockwise | pulse amplitudes rise | BURST | 745 |
| BURST SHAPE | noon | peak at midpoint | BURST | 745 |
| LINK | unlit | own TRIG only | — | 745 |
| LINK | red | triggered by previous TRIG | — | 745 |
| LINK | green | triggered at previous EOR | — | 745 |
| LINK | yellow | triggered at previous EOF | — | 745 |
| LINK | also own TRIG patched | triggers OR'd | — | 745 |
| Channel 1 LINK | linked | follows Channel 4 | — | 745 |
| EOR | BURST mode | each pulse start | BURST | 745 |
| EOF | BURST mode | end of burst | BURST | 745 |
| EOR | STANDARD LFO | half cycle | LFO | 745 |
| EOF | STANDARD LFO | full cycle | LFO | 745 |
| EOR | ALTERNATE LFO | high while falling | LFO ALTERNATE | 745 |
| EOF | ALTERNATE LFO | high while rising | LFO ALTERNATE | 745 |
| CV inputs | beyond ±5V | clipped at ±5V | — | 745 |
| LFO output | 10V mode requested | always ±5V max | LFO | 745 |
| output attenuation | fifth press | wraps to full voltage | — | 745 |
| STANDARD curves | SHAPE counterclockwise | logarithmic | — | 745 |
| ALTERNATE curves | SHAPE clockwise | exponential rise, log fall | — | 745 |
| ALTERNATE curves | SHAPE counterclockwise | log rise, exponential fall | — | 745 |
| LFV VARIANCE | high | random around 0V | LFO ALTERNATE | 745 |
| LFV VARIANCE | low | drunken walk | LFO ALTERNATE | 745 |
| module | power removed | state retained | — | 745 |
Functions 8
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Function Generator | block | patchable | four function generator channels | 745 |
| ADSR Envelope | mode | patchable | AD and AHR envelope modes on OUT | 745 |
| Looping / Cycling Envelope | mode | patchable | CYCLE mode: cycling AD envelope | 745 |
| LFO | mode | patchable | LFO mode: bipolar LFO on OUT | 745 |
| Chaotic / Complex Modulation | mode | patchable | ALTERNATE LFO: chaotic Low Frequency Vacillator | 745 |
| Gate / Trigger Utility | mode | patchable | BURST mode: pulse burst generator | 745 |
| Tempo / Clock Sync | mode | patchable | LFO syncs to clock at TRIG | 745 |
| 1V/Oct Pitch Tracking | jack | patchable | CV inputs track 1 v/oct | 745 |
Power
| +12 V | 106 mA |
|---|---|
| −12 V | 9 mA |
| +5 V | — |
| Width | 14 HP |
| Depth | 38 mm |
Other Function Generator modules
Firmware 9
| Version | Released | Notes |
|---|---|---|
| 1.4 | 2023-04 | Added CVD Mode (alternative button coloring for color vision deficiency). In Utility Mode, sync LEDs now flash with a trigger.745 |
| 1.3 | 2021-09 | Added Utility Mode for manually triggering each channel and setting per-channel output voltages (5V or 10V, with 20% attenuation steps). Moved 10V/5V setting from System Mode to per-channel Utility Mode. Fixed Phase/Clock Sync abnormalities in LFV Mode.745 |
| 1.2.1 | 2021-03-09 | Reduced pot dead zone. Fixed slightly longer minimum attack/decay times. Fixed LFOs not clock syncing in some cases. Fixed channel link to be a gate (not trigger) for proper AHR linking.745 |
| 1.2.0 | 2020-11-19 | LFOs now phase-locked to TRIG input; linked LFOs phase-lock to first LFO's TRIG; reset via trigger on any chained LFO TRIG. Snappier envelopes (virtually zero attack/decay). Removed crossfade at extreme ends of standard burst mode. Added 5% pot dead zone. Various fixes: trigger detection, LFO lockup, cycle mode stuck at minimum, one-shot waveform and retrigger bugs.745 |
| 1.1.3 | 2020-03-03 | Fixed settings not carrying over correctly when upgrading from firmware 1.0.2 or earlier.745 |
| 1.1.2 | 2020-02-25 | Added long-press LEVEL button in System Mode to reset module to default settings. Fixed edge case where CV assignments were not being applied.745 |
| 1.1 | 2020-02-06 | Completely redesigned Burst Mode: RISE sets pulse rate, FALL sets burst length, SHAPE morphs pulse shape (square to sine in standard; saw to triangle to ramp in alternate). Added Alternate modes for all 5 channel modes. Added System Mode for global settings. More extreme log/expo curves. Fixed distorted expo/log curves.745 |
| 1.0.2 | 2019-12-19 | Fixed dithering algorithm to remove quantize error noise on certain low frequency signals. Hold SHAPE on boot to toggle dithering.745 |
| 1.0.1 | 2019-11 | Initial Release745 |
Sources 2
- [745]
-
[746]
Intellijel Quadrax product page ↗product page⚠ verified 2026-05-22 · the manufacturer changed this document since