befaco/rampage
Befaco Rampage Function Generator · Looping / Cycling Envelope
18 HP function generator and looping / cycling envelope by Befaco: 10 inputs, 11 outputs, 13 controls, 4 modes.
Befaco · Rampage User Manual (PDF) ↗
Function Generator · Slew Limiter · Looping / Cycling Envelope · LFO · End-of-Cycle / End-of-Rise Output · Voltage Math / Precision Adder · Logic Gates · Crossfader · Oscillator Sync · Lowpass Filter
Inputs 10
| Jack | What it does | Range | Connections |
|---|---|---|---|
| IN A 1132 | signal to process audio, cv, gate | — | → Channel A In 1 mode
|
| TRIGG A 1132 | starts function generator trigger | — | → Channel A In 1 mode
|
| RISE CV A 1132 | rise time CV cv | — | → Channel A |
| FALL CV A 1132 | fall time CV cv | — | → Channel A |
| CYCLE input A 1132 | inverts CYCLE switch gate | — | → Channel A |
| IN B 1132 | signal to process audio, cv, gate | — | → Channel B In 1 mode
|
| TRIGG B 1132 | starts function generator trigger | — | → Channel B In 1 mode
|
| RISE CV B 1132 | rise time CV cv | — | → Channel B |
| FALL CV B 1132 | fall time CV cv | — | → Channel B |
| CYCLE input B 1132 | inverts CYCLE switch gate | — | → Channel B |
The documents don't state: voltage, polarity, scaling, threshold, coupling, audio rate, impedance (all inputs).
Outputs 11
| Jack | What it does | Range | Connections |
|---|---|---|---|
| OUT A 1132 | integrator output cv, audio | — | from Channel A |
| RISING A 1132 | slope detector, rising gate | ≤ 10 V | from Channel A |
| FALLING A 1132 | slope detector, falling gate | ≤ 10 V | from Channel A |
| EOC A 1132 | end of cycle pulse trigger | ≤ 10 V | from Channel A |
| OUT B 1132 | integrator output cv, audio | — | from Channel B |
| RISING B 1132 | slope detector, rising gate | ≤ 10 V | from Channel B |
| FALLING B 1132 | slope detector, falling gate | ≤ 10 V | from Channel B |
| EOC B 1132 | end of cycle pulse trigger | ≤ 10 V | from Channel B |
| A>B 1132 | comparator output gate | ≤ 10 V | from Comparator |
| MIN 1132 | minimum of channels cv, audio | — | from Mix section |
| MAX 1132 | maximum of channels cv, audio | — | from Mix section |
The documents don't state: voltage (OUT A, OUT B, MIN, MAX); polarity, scaling, pulse, coupling, audio rate, impedance (all outputs).
Controls 13
| Control | What it does | Affects | Positions |
|---|---|---|---|
| TRIGG button A 1132 | manual trigger button | Channel A | — |
| RANGE A 1132 | integrator speed range switch | Channel A |
|
| Shape A 1132 | response curve knob | Channel A | — |
| RISE A 1132 | rise time fader | Channel A |
|
| FALL A 1132 | fall time fader | Channel A |
|
| CYCLE A 1132 | one shot / cycle switch | Channel A |
|
| TRIGG button B 1132 | manual trigger button | Channel B | — |
| RANGE B 1132 | integrator speed range switch | Channel B |
|
| Shape B 1132 | response curve knob | Channel B | — |
| RISE B 1132 | rise time fader | Channel B |
|
| FALL B 1132 | fall time fader | Channel B |
|
| CYCLE B 1132 | one shot / cycle switch | Channel B |
|
| Balance 1132 | A/B crossfader before mix knob | Mix section, A>B, MIN, MAX | — |
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Channel A | voltage controlled integrator | Function generator, Slew limiter / lag, LFO | IN A, TRIGG A, RISE CV A, FALL CV A, CYCLE input A | RISE A, FALL A, RANGE A, Shape A, CYCLE A, TRIGG button A | OUT A, RISING A, FALLING A, EOC A | 1132 |
| Channel B | voltage controlled integrator | Function generator, Slew limiter / lag, LFO | IN B, TRIGG B, RISE CV B, FALL CV B, CYCLE input B | RISE B, FALL B, RANGE B, Shape B, CYCLE B, TRIGG button B | OUT B, RISING B, FALLING B, EOC B | 1132 |
| Mix section | analog logic functions | Crossfader / panner, CV processor / math | — | Balance | MIN, MAX | 1132 |
| Comparator | comparator | Logic | — | Balance | A>B | 1132 |
Modes 4
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| One shot A | operation mode | CYCLE A = one shot | switch or CYCLE input | 1132 |
| Cycle A | operation mode | CYCLE A = cycle | switch or CYCLE input | 1132 |
| One shot B | operation mode | CYCLE B = one shot | switch or CYCLE input | 1132 |
| Cycle B | operation mode | CYCLE B = cycle | switch or CYCLE input | 1132 |
Specs 8
Properties 7
| Subject | Property | Value | Source |
|---|---|---|---|
| core | circuit | two voltage controlled integrators | 1132 |
| Shape | response | exponential/log/linear | 1132 |
| MIN | aka | analog AND | 1132 |
| MAX | aka | analog OR, peak follower | 1132 |
| slope detector | works with | external signals | 1132 |
| RISE / FALL | time vs frequency | inversely proportional | 1132 |
| Cycle waveforms | shapes | square/saw/triangle/log/exp | 1133 |
Behavior 17
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| IN | gate patched | AD envelope with sustain | — | 1132 |
| One shot | falling ramp reaches 0V | stops | One shot | 1132 |
| Cycle | falling ramp reaches 0V | retriggers | Cycle | 1132 |
| retrigger | during rising state | not possible | — | 1132 |
| retrigger | during falling state | allowed | — | 1132 |
| TRIGG | cycle mode | acts as hard sync | Cycle | 1132 |
| IN | cycle mode | acts as soft sync | Cycle | 1132 |
| CYCLE input | gate high | inverts CYCLE switch setting | — | 1132 |
| CYCLE input | gate arrives | does not trigger | — | 1132 |
| RISING | output rising | 10V gate | — | 1132 |
| FALLING | output falling | 10V gate | — | 1132 |
| EOC | function generator reaches 0V | short 10V pulse | — | 1132 |
| EOC | external signal processed | does not work | — | 1132 |
| A>B | B output exceeds A | outputs 10V | — | 1132 |
| Balance | always | no effect on OUT A/B | — | 1132 |
| slope detector | external signal | match lag speed to signal | — | 1132 |
| RISE / FALL faders | moved up | frequency decreases in cycle | — | 1132 |
Functions 10
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Function Generator | block | patchable | patch programmable function generator | 1132 |
| Slew Limiter | block | patchable | integrators aka slew limiters | 1132 |
| Looping / Cycling Envelope | mode | patchable | Cycle mode retriggers at 0V | 1132 |
| LFO | documented use | patchable | Low range for LFO applications | 1132 |
| End-of-Cycle / End-of-Rise Output | jack | patchable | EOC output | 1132 |
| Voltage Math / Precision Adder | jack | patchable | MIN and MAX outputs | 1132 |
| Logic Gates | jack | patchable | A>B comparator output | 1132 |
| Crossfader | control | patchable | crossfader for A & B | 1132 |
| Oscillator Sync | documented use | patchable | TRIG as hard sync in cycle | 1132 |
| Lowpass Filter | documented use | patchable | basic lowpass filtering feature | 1133 |
Power
| +12 V | 110 mA |
|---|---|
| −12 V | 90 mA |
| +5 V | — |
| Width | 18 HP |
| Depth | 26 mm |
Other Function Generator modules
Sources 2
-
[1132]
Rampage User Manual ↗manual · primary⚠ verified 2026-06-04 · the manufacturer changed this document since
-
[1133]
Befaco Rampage product page ↗product page⚠ verified 2026-06-04 · the manufacturer changed this document since