joranalogue/contour-1

Joranalogue Audio Design Contour 1 Function Generator · ADSR Envelope

8 HP function generator and ADSR envelope by Joranalogue Audio Design: 8 inputs, 4 outputs, 8 controls, 4 modes.

Joranalogue Audio Design · Contour 1 User Manual (PDF) ↗

Slew Limiter · Function Generator · ADSR Envelope · Looping / Cycling Envelope · LFO · Analog VCO · 1V/Oct Pitch Tracking · Envelope Follower · Freeze / Hold

Inputs 8

Inputs
JackWhat it doesRangeConnections
Analogue input 397signal to slew
cv, audio, pitch
audio rate yes
impedance 100000 Ω
normalled from 0V
→ Slew core
In 2 modes
  • loop: cycle minimum voltage → Slew core
  • slew: signal to slew → Slew core
Trigger input 397reset and one-shot
trigger
threshold 3 V
impedance 100000 Ω
→ Slew core
Gate input 397AR envelope gate
gate
threshold 3 V
impedance 100000 Ω
→ Slew core, +10 V reference
In 2 modes
  • slew: selects +10V reference → +10 V reference
  • loop: oscillation enable → Slew core
Hold input 398freeze slew core
gate
threshold 3 V
impedance 100000 Ω
→ Slew core
Rise CV 397rise slew rate CV
cv, pitch
scaling v oct
impedance 100000 Ω
→ Slew core
Fall CV 397fall slew rate CV
cv, pitch
scaling v oct
impedance 100000 Ω
normalled from Rise CV
→ Slew core
Rise bend CV 397rise slope shape CV
cv
-5 to 5 V, bipolar
impedance 100000 Ω
→ Rise bend knob
Fall bend CV 397fall slope shape CV
cv
-5 to 5 V, bipolar
impedance 100000 Ω
normalled from Rise bend CV
→ Fall bend knob

The documents don't state: voltage, polarity (Analogue input, Trigger input, Gate input, Hold input, Rise CV, Fall CV); scaling (Analogue input, Rise bend CV, Fall bend CV); coupling (all inputs); audio rate (Rise CV, Fall CV, Rise bend CV, Fall bend CV).

Outputs 4

Outputs
JackWhat it doesRangeConnections
Main output 397slew limited output
cv, audio
audio rate yes
impedance 0 Ω
from Slew core
Inverted output 397inverted slewed output
cv, audio
audio rate yes
impedance 0 Ω
from Slew core
Rise gate output 397high while rising
gate
0 to 5 V, unipolar
impedance 1000 Ω
from Slew core
Fall gate output 397high while falling
gate
0 to 5 V, unipolar
impedance 1000 Ω
from Slew core

The documents don't state: voltage, polarity (Main output, Inverted output); scaling, pulse, coupling (all outputs).

Controls 8

Controls
ControlWhat it doesAffectsPositions
Rise slider 397rising slew rate
fader
Slew core—
Fall slider 397falling slew rate
fader
Slew core—
Trigger button 397manual trigger
button
Slew core—
Slew/loop switch 397slew or loop mode
switch
Slew core
  • slew (left): slew limiter/envelope
  • loop (right): continual self-retrigger
Frequency range switch 397time range
switch
Slew core
  • full: 500 µs to 30 s
  • audio: 500 µs to 30 ms
Rise bend knob 397rise slope shape
knob · bipolar
Slew core
  • min: concave
  • centre: linear
  • max: convex
Fall bend knob 397fall slope shape
knob · bipolar
Slew core
  • min: concave
  • centre: linear
  • max: convex
Volt per octave trimmer 397pitch tracking calibration
other
Slew core—

Blocks 2

Blocks and their connections
BlockKindTypesInputsControlsOutputsSource
Slew coreslew limiter/function generatorSlew limiter / lag, Function generator, Envelope generator, LFO, OscillatorAnalogue input, Trigger input, Gate input, Hold input, Rise CV, Fall CV, Rise bend CV, Fall bend CVRise slider, Fall slider, Rise bend knob, Fall bend knob, Slew/loop switch, Frequency range switch, Trigger button, Volt per octave trimmerMain output, Inverted output, Rise gate output, Fall gate output397
+10 V referenceprecision reference—Gate input——397

Modes 4

Modes
ModeKindSelected bySelection methodSource
slewslew limiter/envelopeSlew/loop switch = slew (left)switch397
loopself-cycling oscillatorSlew/loop switch = loop (right)switch397
fulltime rangeFrequency range switch = fullswitch397
audiotime rangeFrequency range switch = audioswitch397

Specs 12

Specs
SubjectQuantityValueConditionSource
slew time0 to +10 V slope time0.0005 to 30 sfull range397
slew time0 to +10 V slope time0.0005 to 0.03 saudio range397
loop frequencyfrequency0.017 to 1000 Hzfull range, loop397
loop frequencyfrequency17 to 1000 Hzaudio range, loop397
bend CVCV range-5 to 5 Vbend knob centred397
logic inputslow threshold2 V—397
logic inputshigh threshold3 V—397
one-shot/gate envelopepeak level10 V—397
inputsimpedance100000 ohm—397
gate outputsimpedance1000 ohm—397
modulewidth8 HP—397
pitch CVtracking1 V/octRise CV, Fall normalled397

Properties 8

Properties
SubjectPropertyValueSource
trigger/gate/hold inputsinput stageSchmitt trigger397
analogue outputsimpedance compensationyes397
slider LEDsstatus displayrising/falling/holding397
bendslope time compensationminimised deviation397
Rise/Fall CVeffect of increasefaster slew397
slew limiterdirectionbidirectional398
VCOtemperature stabilitystable398
circuittypeanalogue397

Behavior 14

Behavior rules
SubjectWhenEffectModeSource
outputtrigger rising edgeresets to 0 V—397
Trigger inputslew modeone-shot rise then fallslew397
one-shotrise completefalls to analogue inputslew397
Gate inputhigh, slew modesource becomes +10 Vslew397
Gate inputpatched, loop modeloops only while highloop397
loop cycleoutput reaches analogue inputnew cycle startsloop397
Analogue inputunpatchedminimum 0 V—397
Fall CVunpatchedfollows Rise CV—397
Fall bend CVunpatchedfollows Rise bend CV—397
bend changeloop modeslope time changes slightlyloop397
Hold inputhighslew core freezes—398
slider LEDsholdingboth lit—397
gate outputscore idlelow 0 V—397
brightnessalwaystracks positive output—397

Functions 9

Function tags
FunctionBasisScopeEvidenceSource
Slew Limiterblockpatchableblock Slew core: slew limiter397
Function Generatorblockpatchableblock Slew core: function generator397
ADSR Envelopemodepatchableslew mode: AR/AD envelope on Main output397
Looping / Cycling Envelopemodepatchableloop mode: continual self-retrigger397
LFOdocumented usepatchabledocumented: variable-shape LFO in loop mode398
Analog VCOdocumented usepatchabledocumented: temperature-stable VCO, loop mode398
1V/Oct Pitch Trackingjackpatchablejack Rise CV: 1 V/oct response397
Envelope Followerdocumented usepatchabledocumented: envelope follower use398
Freeze / Holdjackpatchablejack Hold input: freezes slew core398

Power

+12 V90 mA
−12 V85 mA
+5 V—
Width8 HP
Depth30 mm

Other Function Generator modules

All Function Generator modules →

Firmware 3

VersionReleasedNotes
Revision E—No functional changes.397
Revision D—No functional changes.397
Revision C—Initial release.397

Sources 2

  1. [397]
    Contour 1 User Manual ↗manual · primary
    ● verified 2026-05-15
  2. [398]
    Joranalogue Audio Design Contour 1 product page ↗product page
    ⚠ verified 2026-05-15 · the manufacturer changed this document since