instruo/1f
Instruō [1]f Crossfader
2 HP crossfader by Instruō: 2 inputs, 1 output, 2 controls, 7 modes.
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Input 1 931 | signal input audio, cv | coupling dc | → Crossfader attenuated by Fader |
| Input 2 931 | signal input audio, cv | coupling dc | → Crossfader attenuated by Fader |
The documents don't state: voltage, impedance, normalling (all inputs).
Outputs 1
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Output 931 | processed output / offset audio, cv | -10 to 10 V, bipolar coupling dc | from Crossfader, DC offset |
The documents don't state: impedance (Output).
Controls 2
Blocks 2
Modes 7
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Crossfader | patch-dependent function | — | patch both inputs | 931 |
| Attenuator | patch-dependent function | Polarity Switch = up | patch Input 1 only | 931 |
| Attenuverter | patch-dependent function | Polarity Switch = down | patch Input 1 only | 931 |
| Unipolar Positive DC Offset | patch-dependent function | Polarity Switch = up | no inputs patched | 931 |
| Unipolar Negative DC Offset | patch-dependent function | Polarity Switch = down | no inputs patched | 931 |
| Unipolar Positive DC Offset Crossfader | patch-dependent function | Polarity Switch = up | patch Input 2 only | 931 |
| Unipolar Negative DC Offset Crossfader | patch-dependent function | Polarity Switch = down | patch Input 2 only | 931 |
Specs 6
Properties 5
Behavior 9
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Output | no inputs patched | unipolar DC offset | — | 931 |
| Polarity Switch | down | inverts input signals | — | 931 |
| Fader | up, both inputs patched | Input 1 passes | — | 931 |
| Fader | moved down, both patched | crossfades to Input 2 | — | 931 |
| Fader | lowest, Input 1 only | attenuates to 0V | — | 931 |
| Fader | highest, no inputs, switch up | +10V at Output | — | 931 |
| Fader | highest, no inputs, switch down | -10V at Output | — | 931 |
| Fader | up, Input 2 only | Output passes ±10V offset | — | 931 |
| Fader | down, Input 2 only | crossfades to Input 2 | — | 931 |
Functions 3
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Crossfader | block | patchable | Crossfader: Input 1 to Input 2 | 931 |
| Attenuverter / Offset | documented use | patchable | documented: acts as an attenuverter | 931 |
| Manual Controller | documented use | patchable | documented: manual DC offset via Fader | 931 |
Power
| +12 V | 8 mA |
|---|---|
| −12 V | 8 mA |
| +5 V | — |
| Width | 2 HP |
| Depth | 27 mm |
Other Crossfader modules
Sources 2
-
[931]
Instruō [1]f User Manual ↗manual · primary⚠ verified 2026-05-24 · the manufacturer changed this document since
- [932]