doepfer/a-151
Doepfer A-151 Quad Sequential Switch Sequential / Voltage Switch
4 HP sequential / voltage switch by Doepfer: 2 inputs, 5 bidirectional jacks, 1 control.
Doepfer · A-151 Quad Sequential Switch manual (English) (PDF) ↗
Inputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Trig. In 527 | trigger pulse input trigger, clock | audio rate yes | → Sequential switch |
| Res. In 527 | reset pulse input trigger | — | → Sequential switch |
The documents don't state: voltage, threshold, impedance, normalling (all inputs).
Bidirectional jacks 5
| Jack | What it does | Range | Connections |
|---|---|---|---|
| O/I 527 | common out / input audio, cv, gate, trigger, clock | -12 to 12 V impedance 1000 Ω | → Sequential switch |
| I/O 1 527 | in / output 1 audio, cv, gate, trigger, clock | -12 to 12 V | → Sequential switch |
| I/O 2 527 | in / output 2 audio, cv, gate, trigger, clock | -12 to 12 V | → Sequential switch |
| I/O 3 527 | in / output 3 audio, cv, gate, trigger, clock | -12 to 12 V | → Sequential switch |
| I/O 4 527 | in / output 4 audio, cv, gate, trigger, clock | -12 to 12 V | → Sequential switch |
The documents don't state: coupling (all bidirectional jacks); normalling (O/I).
Controls 1
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Steps 527 | limits number of steps switch | Sequential switch, I/O 3, I/O 4 |
|
Blocks 1
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Sequential switch | four-position electronic rotary switch | Sequential / voltage-controlled switch | Trig. In, Res. In, I/O 1, I/O 2, I/O 3, I/O 4 | Steps | O/I | 527 |
Specs 8
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| O/I and I/O | signal range | -12 to 12 V | version 2 (from 2005) | 528 |
| O/I and I/O | signal range | -8 to 8 V | version 1 | 527 |
| Steps | step count | 2 to 4 steps | — | 527 |
| O/I line | protection resistor | 1000 ohm | — | 528 |
| module | width | 4 HP | — | 528 |
| module | depth | 35 mm | — | 528 |
| module | current +12V | 20 mA | — | 528 |
| module | current -12V | 10 mA | — | 528 |
Properties 4
Behavior 7
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Trig. In | rising edge | advance to next I/O | — | 527 |
| Sequential switch | trigger after fourth I/O | return to I/O 1 | — | 527 |
| Res. In | rising edge | immediately connect I/O 1 | — | 527 |
| Steps | set to 2 or 3 | fewer addressed in/outputs | — | 527 |
| Trig. In | very fast triggers | audio-frequency modulation results | — | 527 |
| O/I and I/O | beyond ±8 V, version 1 | module malfunctions | — | 527 |
| O/I | switching VCO pitch CV | small detuning from 1k resistor | — | 528 |
Functions 1
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| Sequential / Voltage Switch | block | patchable | Sequential switch: trigger-stepped switch | 527 |
Power
| +12 V | 20 mA |
|---|---|
| −12 V | 10 mA |
| +5 V | — |
| Width | 4 HP |
| Depth | 35 mm |
Other Sequential / Voltage Switch modules
Sources 2
- [527]
- [528]