doepfer/a-135-2
Doepfer A-135-2 VCA · Mixer
8 HP VCA and mixer by Doepfer: 8 inputs, 6 outputs, 10 controls, 2 modes.
Inputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| In 1 1662 | signal input audio, cv | -7.5 to 7.5 V coupling dc | → VCA 1 |
| CV In 1 1662 | gain control input cv | 0 to 5 V, unipolar scaling linear coupling dc | → VCA 1 attenuated by CV1 In 2 modes
|
| In 2 1662 | signal input audio, cv | -7.5 to 7.5 V coupling dc | → VCA 2 |
| CV In 2 1662 | gain control input cv | 0 to 5 V, unipolar scaling linear coupling dc | → VCA 2 attenuated by CV2 In 2 modes
|
| In 3 1662 | signal input audio, cv | -7.5 to 7.5 V coupling dc | → VCA 3 |
| CV In 3 1662 | gain control input cv | 0 to 5 V, unipolar scaling linear coupling dc | → VCA 3 attenuated by CV3 In 2 modes
|
| In 4 1662 | signal input audio, cv | -7.5 to 7.5 V coupling dc | → VCA 4 |
| CV In 4 1662 | gain control input cv | 0 to 5 V, unipolar scaling linear coupling dc | → VCA 4 attenuated by CV4 In 2 modes
|
The documents don't state: impedance (all inputs).
Outputs 6
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Out 1 1662 | VCA output audio, cv | coupling dc | from VCA 1 |
| Out 2 1662 | VCA output audio, cv | coupling dc | from VCA 2 |
| Out 3 1662 | VCA output audio, cv | coupling dc | from VCA 3 |
| Out 4 1662 | VCA output audio, cv | coupling dc | from VCA 4 |
| Selected 1662 | sum of unpatched VCAs audio, cv | coupling dc | from voltage controlled mixer, VCA 1, VCA 2, VCA 3, VCA 4 |
| All 1662 | sum of all VCAs audio, cv | coupling dc | from voltage controlled mixer, VCA 1, VCA 2, VCA 3, VCA 4 |
The documents don't state: impedance (all outputs).
Controls 10
| Control | What it does | Affects | Positions |
|---|---|---|---|
| L1 1662 | manual VCA gain knob | VCA 1 | In 2 modes
|
| CV1 1662 | CV attenuator knob | CV In 1 | In 2 modes
|
| L2 1662 | manual VCA gain knob | VCA 2 | In 2 modes
|
| CV2 1662 | CV attenuator knob | CV In 2 | In 2 modes
|
| L3 1662 | manual VCA gain knob | VCA 3 | In 2 modes
|
| CV3 1662 | CV attenuator knob | CV In 3 | In 2 modes
|
| L4 1662 | manual VCA gain knob | VCA 4 | In 2 modes
|
| CV4 1662 | CV attenuator knob | CV In 4 | In 2 modes
|
| mode jumpers 1662 | mixer special functions jumper | VCA 1, VCA 2, VCA 3, VCA 4 |
|
| normalling jumpers 1662 | signal input normalling jumper | In 2, In 3, In 4 |
|
Blocks 5
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| VCA 1 | linear VCA | VCA | In 1, CV In 1 | L1, CV1 | Out 1 | 1662 |
| VCA 2 | linear VCA | VCA | In 2, CV In 2 | L2, CV2 | Out 2 | 1662 |
| VCA 3 | linear VCA | VCA | In 3, CV In 3 | L3, CV3 | Out 3 | 1662 |
| VCA 4 | linear VCA | VCA | In 4, CV In 4 | L4, CV4 | Out 4 | 1662 |
| voltage controlled mixer | VCA-based mixer | Mixer | — | — | Selected, All | 1662 |
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Dual Stereo VCA | jumper setting | mode jumpers = Dual Stereo VCA | internal jumpers | 1662 |
| Quad VCA | jumper setting | mode jumpers = Quad VCA | internal jumpers | 1662 |
Specs 13
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1662 |
| module | depth | 45 mm | — | 1662 |
| module | +12V current | 40 mA | — | 1662 |
| module | -12V current | 40 mA | — | 1662 |
| VCA | gain | 0 to 1 x | — | 1662 |
| CV In | full-range control voltage | 0 to 5 V | attenuator fully clockwise | 1662 |
| In | max signal level | 15 Vpp | without clipping | 1662 |
| mix outputs | max gain | 0.6 x | — | 1662 |
| VCA | crosstalk between VCAs | -80 dB | — | 1662 |
| VCA | attenuation at 0V CV | -70 dB | — | 1662 |
| VCA | total harmonic distortion | 1 % | — | 1662 |
| VCA | CV feedthrough | ≤ 15 mV | — | 1662 |
| module | width | 40.3 mm | — | 1662 |
Properties 7
Behavior 13
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| Selected | Out n patched | VCA n removed from sum | — | 1662 |
| All | Out n patched | VCA n still summed | — | 1662 |
| VCA gain | CV exceeds gain 1 | gain stays at 1 | — | 1662 |
| In | signal above 15Vpp | needs external attenuator | — | 1662 |
| VCA 3 | Dual Stereo VCA jumper | controlled by L1 + CV1 | Dual Stereo VCA | 1662 |
| VCA 4 | Dual Stereo VCA jumper | controlled by L2 + CV2 | Dual Stereo VCA | 1662 |
| L3/CV3, L4/CV4 | Dual Stereo VCA jumper | out of operation | Dual Stereo VCA | 1662 |
| all four VCAs | Quad VCA jumper | controlled by L1 + CV1 | Quad VCA | 1662 |
| L2-L4, CV2-CV4 | Quad VCA jumper | out of operation | Quad VCA | 1662 |
| In 2 | normalling jumper installed | normalled from In 1 | — | 1662 |
| In 3 | normalling jumper installed | normalled from In 2 | — | 1662 |
| In 4 | normalling jumper installed | normalled from In 3 | — | 1662 |
| normalling jumpers | at factory | not installed | — | 1662 |
Functions 3
Power
| +12 V | 40 mA |
|---|---|
| −12 V | 40 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 45 mm |
Other VCA modules
Sources 1
- [1662]