doepfer/a-132-3
Doepfer A-132-3 VCA
8 HP VCA by Doepfer: 4 inputs, 2 outputs, 6 controls, 2 modes.
Inputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| In 1 1827 | signal input audio, cv | -8 to 8 V coupling dc | → VCA 1 |
| CV 1 1827 | gain control voltage cv | coupling dc | → VCA 1 attenuated by CV attenuator 1 |
| In 2 1827 | signal input audio, cv | -8 to 8 V coupling dc | → VCA 2 |
| CV 2 1827 | gain control voltage cv | coupling dc | → VCA 2 attenuated by CV attenuator 2 |
The documents don't state: voltage (CV 1, CV 2); impedance, normalling (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Out 1 1827 | VCA output audio, cv | -10 to 10 V coupling dc | from VCA 1 |
| Out 2 1827 | VCA output audio, cv | -10 to 10 V coupling dc | from VCA 2 |
The documents don't state: impedance (all outputs).
Controls 6
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Gain 1 1827 | manual gain knob · 0 to 10 | VCA 1 | — |
| CV attenuator 1 1827 | CV attenuation knob | CV 1 | — |
| Lin/Exp 1 1827 | control scale switch | VCA 1 |
|
| Gain 2 1827 | manual gain knob · 0 to 10 | VCA 2 | — |
| CV attenuator 2 1827 | CV attenuation knob | CV 2 | — |
| Lin/Exp 2 1827 | control scale switch | VCA 2 |
|
Blocks 2
Modes 2
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| linear | control scale | Lin/Exp = linear | per VCA | 1827 |
| exponential | control scale | Lin/Exp = exponential | per VCA | 1827 |
Specs 9
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1827 |
| module | width | 40.3 mm | — | 1827 |
| module | depth | 50 mm | — | 1827 |
| module | +12V current | 30 mA | — | 1827 |
| module | -12V current | 30 mA | — | 1827 |
| In | undistorted input level | 16 Vpp | — | 1827 |
| Out | output swing limit | -10 to 10 V | SSM2164 version | 1827 |
| VCA | max gain | 1 x | CEM/AS3360 version | 1827 |
| Gain | unity gain position | 8 scale | — | 1827 |
Properties 4
Behavior 5
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| VCA (CEM/AS3360) | CV increased past unity | gain stays at 1 | — | 1827 |
| VCA (SSM2164) | CV increased past unity | gain exceeds 1 | — | 1827 |
| Out (SSM2164) | high gain and input | clips near ±10V | — | 1827 |
| Gain | position 8 (3 o'clock) | unity gain, both modes | — | 1827 |
| In | signal above 16 Vpp | distortion; use external attenuator | — | 1827 |
Functions 2
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| VCA | block | patchable | block VCA 1/2: two VCAs | 1827 |
| Exponential / Linear VCA Response | control | patchable | switch: linear or exponential scale | 1827 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 30 mA |
| +5 V | — |
| Width | 8 HP |
| Depth | 50 mm |
Other VCA modules
Sources 1
- [1827]