doepfer/a-130-3
Doepfer A-130-3 VCA
22 HP VCA by Doepfer: 4 inputs, 2 outputs, 6 controls.
Inputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| CV 1 2052 | VCA control voltage cv | coupling dc | → VCA 1 attenuated by CV 1 (attenuator) |
| In 1 2052 | signal input audio, cv | -8 to 8 V coupling dc | → VCA 1 |
| CV 2 2052 | VCA control voltage cv | coupling dc | → VCA 2 attenuated by CV 2 (attenuator) |
| In 2 2052 | signal input audio, cv | -8 to 8 V coupling dc | → VCA 2 |
The documents don't state: voltage (CV 1, CV 2); polarity, audio rate, impedance (all inputs).
Outputs 2
| Jack | What it does | Range | Connections |
|---|---|---|---|
| Out 1 2052 | signal output audio, cv | coupling dc | from VCA 1 |
| Out 2 2052 | signal output audio, cv | coupling dc | from VCA 2 |
The documents don't state: voltage, polarity, audio rate, impedance (all outputs).
Controls 6
| Control | What it does | Affects | Positions |
|---|---|---|---|
| Gain 1 2052 | initial gain knob · 0 to 1 gain | VCA 1 | — |
| CV 1 (attenuator) 2052 | CV input attenuator knob | CV 1 | — |
| lin/exp 1 2052 | VCA characteristic switch | VCA 1 |
|
| Gain 2 2052 | initial gain knob · 0 to 1 gain | VCA 2 | — |
| CV 2 (attenuator) 2052 | CV input attenuator knob | CV 2 | — |
| lin/exp 2 2052 | VCA characteristic switch | VCA 2 |
|
Blocks 2
Specs 10
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 22 HP | — | 1988 |
| module | width | 111.4 mm | — | 1988 |
| module | height | 1 U | — | 1988 |
| module | depth | 50 mm | — | 1988 |
| module | +12V current | 30 mA | — | 1988 |
| module | -12V current | 30 mA | — | 1988 |
| VCA | amplification range | 0 to 1 gain | — | 2052 |
| VCA | maximum gain | 0 dB | — | 2052 |
| CV input | voltage for max gain | 5 V | CV knob CW, Gain CCW | 2052 |
| In | max undistorted level | 16 Vpp | — | 2052 |
Properties 7
Behavior 3
Functions 2
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| VCA | block | patchable | two identical VCAs | 2052 |
| Exponential / Linear VCA Response | control | patchable | lin/exp switch per VCA | 2052 |
Power
| +12 V | 30 mA |
|---|---|
| −12 V | 30 mA |
| +5 V | — |
| Width | 22 HP |
| Depth | 50 mm |
Other VCA modules
Sources 2
- [1988]
-
[2052]
Doepfer A-130-2 product page (functions shared with the A-130-3) ↗product page● verified 2026-11-17