bastl-instruments/skis-ii
Bastl Instruments Skis II ADSR Envelope · VCA
5 HP ADSR envelope and VCA by Bastl Instruments: 8 inputs, 4 outputs, 8 controls, 4 modes.
Inputs 8
| Jack | What it does | Range | Connections |
|---|---|---|---|
| TRIGGER A 448 | starts decay envelope trigger, gate | — | → Envelope A In 2 modes
|
| DECAY CV IN A 448 | decay time CV cv | — | → Envelope A In 2 modes
|
| VCA CV IN A 448 | VCA control voltage cv | scaling linear | normalled from ENV OUT A → VCA A |
| VCA input A 448 | VCA signal input audio | — | → VCA A |
| TRIGGER B 448 | starts decay envelope trigger, gate | — | normalled from TRIGGER A → Envelope B In 2 modes
|
| DECAY CV IN B 448 | decay time CV cv | — | → Envelope B In 2 modes
|
| VCA CV IN B 448 | VCA control voltage cv | scaling linear | normalled from ENV OUT B → VCA B |
| VCA input B 448 | VCA signal input audio | — | → VCA B |
The documents don't state: voltage (TRIGGER A, VCA input A, TRIGGER B, VCA input B); polarity, threshold, coupling, audio rate, impedance (all inputs); scaling (DECAY CV IN A, DECAY CV IN B).
Outputs 4
| Jack | What it does | Range | Connections |
|---|---|---|---|
| ENV OUT A 448 | envelope output cv | -0.5 to 6 V | from Envelope A |
| VCA output A 448 | VCA output audio | — | from VCA A |
| ENV OUT B 448 | envelope output cv | -0.5 to 6 V | from Envelope B |
| VCA output B 448 | VCA output audio | — | from VCA B |
The documents don't state: voltage (VCA output A, VCA output B); polarity, scaling, coupling, audio rate, impedance (all outputs).
Controls 8
| Control | What it does | Affects | Positions |
|---|---|---|---|
| DECAY A 448 | decay time knob | Envelope A | — |
| DECAY B 448 | decay time knob | Envelope B | — |
| GATE MODE 448 | trigger/gate mode select jumper | Envelope A, Envelope B |
|
| TAMB 448 | tambourine bend jumper | VCA A, VCA B |
|
| K_A 448 | knob control scheme jumper | DECAY A, DECAY B |
|
| trigger normalization jumper 448 | TRIGGER B normalization jumper | TRIGGER B |
|
| E/L 448 | decay shape jumper | Envelope A, Envelope B |
|
| OUT_A_TO_B 448 | output mixing jumper | VCA output A, VCA output B |
|
Blocks 4
| Block | Kind | Types | Inputs | Controls | Outputs | Source |
|---|---|---|---|---|---|---|
| Envelope A | voltage controlled decay envelope | Envelope generator | TRIGGER A, DECAY CV IN A | DECAY A | ENV OUT A | 448 |
| VCA A | linear VCA | VCA | VCA input A, VCA CV IN A | — | VCA output A | 448 |
| Envelope B | voltage controlled decay envelope | Envelope generator | TRIGGER B, DECAY CV IN B | DECAY B | ENV OUT B | 448 |
| VCA B | linear VCA | VCA | VCA input B, VCA CV IN B | — | VCA output B | 448 |
Modes 4
| Mode | Kind | Selected by | Selection method | Source |
|---|---|---|---|---|
| Trigger mode | envelope mode | GATE MODE = open | — | 448 |
| Gate mode | envelope mode | GATE MODE = connected | — | 448 |
| Mix knob scheme | knob scheme | K_A = default | — | 448 |
| Attenuator knob scheme | knob scheme | K_A = re-soldered | — | 448 |
Specs 9
| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Decay envelope | decay time | 8 to 3000 ms | — | 449 |
| Decay envelope | natural attack time | 2 ms | — | 448 |
| DECAY CV IN | voltage for full knob range | 5 V | Mix knob scheme | 448 |
| VCA | CV for unity gain | 5 V | — | 448 |
| VCA | CV for half amplitude | 2.5 V | — | 448 |
| module | width | 5 HP | — | 448 |
| module | depth | 24 mm | — | 448 |
| module | current +12V | 40 mA | — | 448 |
| module | current -12V | 35 mA | — | 448 |
Properties 5
Behavior 13
| Subject | When | Effect | Mode | Source |
|---|---|---|---|---|
| VCA CV IN | unpatched | envelope drives VCA | — | 448 |
| VCA CV IN | cable patched | envelope disconnected from VCA | — | 448 |
| VCA | CV 0V | closed | — | 448 |
| VCA | CV above 5V | gain above unity | — | 448 |
| TRIGGER B | unpatched | follows TRIGGER A | — | 448 |
| TRIGGER B normalization | jumper trace cut | no normalisation | — | 448 |
| TRIGGER input | GATE MODE jumper connected | gate (release) mode | — | 448 |
| DECAY CV IN | default knob scheme | added to knob position | — | 448 |
| DECAY knob | attenuator scheme, CV patched | attenuates DECAY CV IN | Attenuator knob scheme | 448 |
| DECAY knob | attenuator scheme, no cable | acts normally | Attenuator knob scheme | 448 |
| VCA cell | TAMB jumper closed | resonates at high pitch | — | 448 |
| Decay envelope | E/L trace cut | linear shape | — | 448 |
| B output | OUT_A_TO_B set, A unpatched | both channels mixed | — | 448 |
Functions 2
| Function | Basis | Scope | Evidence | Source |
|---|---|---|---|---|
| ADSR Envelope | block | patchable | block Envelope A/B: decay envelope, ENV OUT jack | 448 |
| VCA | block | patchable | block VCA A/B: linear VCA | 448 |
Power
| +12 V | 40 mA |
|---|---|
| −12 V | 35 mA |
| +5 V | — |
| Width | 5 HP |
| Depth | 24 mm |
Other ADSR Envelope modules
Sources 2
- [448]
-
[449]
Bastl Instruments Skis II product page ↗product page⚠ verified 2026-05-17 · the manufacturer changed this document since